Energy dispersive X-ray fluorescence (EDXRF) determination of lanthanides after preconcentration on 1-(2-pyridylazo)-2-naphthol modified naphthalene

A method is described for the simultaneous multielement determination of yttrium and lanthanides at microgram level. This is based on the preconcentration of these lanthanides on to 1-(2-pyridylazo)-2-naphthol (PAN) modified naphthalene. The optimal conditions for quantitative preconcentration viz., pH, amount of PAN modified naphthalene, time of stirring and aqueous phase volume were systematically evaluated. The quantitation of lanthanides was carried out by energy dispersive X-ray fluorescence analyzer, employing²⁴¹Am annular source, via their characteristic K X-rays. The developed procedure gave reliable results in the analysis of xenotime samples.     

Meroterpenoids—III : Psoralea corylifolia linn.—3. Synthesis of (±)-bakuchiol methyl ether

A synthesis of (±)-bakuchiol methyl ether, involving Claisen rearrangement of geranyl vinyl ether as the key step, is described. Further thermal reorganisation of the intermediate 3-vinyl-citronellal is discussed.     

Mixed-ligand chelate extraction of neodymium(III) with thenoyltrifluoroacetone and various sulphoxides

Mixed-ligand chelate extraction of Nd(III) into benzene with mixtures of thenoyltrifluoroacetone (HTTA) and bis-2-ethylhexyl sulphoxide (B2EHSO) or di-n-octyl sulphoxide (DOSO) or diphenyl sulphoxide (DPhSO) or trioctylphosphine oxide (TOPO) from thiocyanate solutions has been studied. A very high synergistic enhancement of the order 10(3) has been observed in these systems. Thus this mixed-ligand chelate system may be useful in the extraction and separation of Nd(III) from other metal ions. The mechanism of extraction can be explained by a simple chemically based model presented in this paper.     

Flotation-spectrophotometric method for the determination of mercury using iodide and brilliant green

This paper describes a sensitive spectrophotometric method for the determination of mercury, based on the flotation of a mercury iodide-brilliant green complex with cyclohexane at pH 5 and dissolution of the complex in acetone. The absorbance of the complex is measured at 625 nm. Beer's law is obeyed from 4–500 g/l of mercury. The method is highly sensitive ( = 5.96 × 10⁵ 1 mol^–1 cm^–1) and selective, as it is free from interferences by almost all cations and anions in the presence of EDTA. Furthermore, a two-level orthogonal array design as a chemometric method has been used for optimization of the various parameters involved. The method has been successfully applied to paper industry effluents.     

Spectrophotometric determination of ziram (dithiocarbamate fungicide) by thiocyanate and rhodamine 6G method

A sensitive spectrophotometric method has been developed for the determination of ziram in water, vegetables and grains. The method is based on the dissociation of dithiocarbamate complex of zinc with thiocyanate and rhodamine 6G at pH 4 to form a pink coloured complex that is stabilized by gelatin. The method is simple and Beer's law is obeyed over the concentration range of 0.05-1 ppm of ziram. The method is free from interference of similar dithiocarbamate fungicides containing Mn(2+) and Fe(3+) ions.     

In situ measurement of conformational changes in proteins at liquid interfaces by circular dichroism spectroscopy

A new circular dichroism (CD) spectroscopy technique for studying conformational changes in proteins in situ at the air-water interface is described. By using this technique, conformations of four proteins, viz., beta-casein, bovine serum albumin (BSA), lysozyme, and fibrinogen in the adsorbed state at the air-water interface have been studied. beta-Casein, which is predominantly in a disordered state in solution, assumes a beta-sheet conformation at the air-water interface. On the other hand, lysozyme and fibrinogen, which are alpha+beta-type proteins in solution, become beta-type proteins by completely transforming their alpha-helix structure into beta-sheets. Bovine serum albumin, which is an alpha-type protein in solution, loses its alpha-helix and becomes a disordered protein at the air-water interface. The results indicated that during unfolding and film formation at the interface, structural changes in proteins, regardless of their initial native state, follow the course of increasing beta-sheet and disordered structure and decreasing alpha-helix content. Although this seems to be the general trend, the exceptional case of BSA suggests, however, that this is not universal.     

Step-economic and cost effective synthesis of coumarin based blue emitting fluorescent dyes

Cost effective and green protocols for the synthesis of two new series of coumarin based blue light emitting fluorophores named as ‘Beta Fluors’ and ‘Alpha Fluors’ are described. The coumarin alkylamide based Beta Fluors are developed using a one-step multi-component process in the presence of phenyl boronic acid as an efficient green catalyst. The Alpha Fluors are structured with coumarin–triazole–carboxamide peptidomimetics and their synthesis involves the ‘click with MCR’ concept. The new fluorophores gave high Stoke’s shift values for the emission wavelengths and their structural features are promising for further fine tuning to obtain preferred emission maxima.     

Polycaprolactone solution–based ink for designing microfluidic channels on paper via 3D printing platform for biosensing application

This work reports a novel fabrication technique for development of channels on paper‐based microfluidic devices using the syringe module of a 3D printing syringe–based system. In this study, printing using polycaprolactone (PCL)‐based ink (Mw 70 000‐90 000) was employed for the generation of functional hydrophobic barriers on Whatman qualitative filter paper grade 1 (approximate thickness of 180 μm and pore diameter of 11 μm), which would effectively channelize fluid flow to multiple assay zones dedicated for different analyte detection on a microfluidic paper‐based analytical device (μPAD). The standardization studies reveal that a functional hydrophilic channel for sample conduction fabricated using the reported technique can be as narrow as 460.7 ± 20 μm and a functional hydrophobic barrier can be of any width with a lower limit of about 982.2 ± 142.75 μm when a minimum number of two layers of the ink is extruded onto paper. A comparison with the hydrodynamic model established for writing with ink is used to explain the width of the line printed by this system. A fluid flow analysis through a single channel system was also carried out to establish its conformity with the Washburn model, which governs the fluid flow in two‐dimensional μPAD. The presented fabrication technique proves to be a robust strategy that effectively taps the advantages of this 3D printing technique in the production of μPADs with enhanced speed and reproducibility.     

Recent Advances in the Chemistry and Therapeutic Evaluation of Naturally Occurring and Synthetic Withanolides

Natural products are a major source of biologically active compounds that make promising lead molecules for developing efficacious drug-like molecules. Natural withanolides are found in many flora and fauna, including plants, algae, and corals, that traditionally have shown multiple health benefits and are known for their anti-cancer, anti-inflammatory, anti-bacterial, anti-leishmaniasis, and many other medicinal properties. Structures of these withanolides possess a few reactive sites that can be exploited to design and synthesize more potent and safe analogs. In this review, we discuss the literature evidence related to the medicinal implications, particularly anticancer properties of natural withanolides and their synthetic analogs, and provide perspectives on the translational potential of these promising compounds.