Research of spatial resolution in external electro-optic probing

A new method, based on zero point of longitudinal electric field, was used to determine the spatial resolution of external electro-optic (EO) probing equipment. Considering the diffraction of Gauss beam, the result of external EO probing was simulated which was in accordance with the experiment. A spatial resolution <1 μm was demonstrated initially in our equipment using 650 nm laser diode as probe beam and semi-insulating GaP as probe tip.     

Si1－xGex/Si量子阱发光材料的分子束外延生长及其结构研究

采用固源Si分子束外延,在较高的生长温度于Si(100)衬底上制备出Si1－xGex/Si量子阱发光材料。发光样品的质量和特性通过卢瑟福背散射、X射线双晶衍射及光致发光评估。背散射实验中观察到应变超晶格的反常沟道效应;X射线分析表明材料的生长是共度的、无应力释放的,结晶完整性好。低温光致发光主要是外延合金量子阱中带边激子的无声发射和横光学声子参与的激子复合。并讨论了生长温度对量于阱发光的影响。     

A cellular automaton technique for modelling of a binary dendritic growth with convection

A two-dimensional model for the simulation of a binary dendritic growth with convection has been developed in order to investigate the effects of convection on dendritic morphologies. The model is based on a cellular automaton (CA) technique for the calculation of the evolution of solid/liquid (s/l) interface. The dynamics of the interface controlled by temperature, solute diffusion and Gibbs–Thomson effects, is coupled with the continuum model for energy, solute and momentum transfer with liquid convection. The solid fraction is calculated by a governing equation, instead of some approximate methods such as lever rule method [A. Jacot, M. Rappaz, Acta Mater. 50 (2002) 1909–1926.] or interface velocity method [L. Nastac, Acta Mater. 47 (1999) 4253; L. Beltran-Sanchez, D.M. Stefanescu, Mat. and Mat. Trans. A 26 (2003) 367.]. For the dendritic growth without convection, mesh independency of simulation results is achieved. The simulated steady-state tip velocity are compared with the predicted values of LGK theory [Lipton, M.E. Glicksmanm, W. Kurz, Metall. Trans. 18(A) (1987) 341.] as a function of melt undercooling, which shows good agreement. The growth of dendrite arms in a forced convection has been investigated. It was found that the dendritic growth in the upstream direction was amplified, due to larger solute gradient in the liquid ahead of the s/l interface caused by melt convection. In the isothermal environment, the calculated results under very fine mesh are in good agreement with the Oseen–Ivanstov solution for the concentration-driven growth in a forced flow.     

Solid state reactions of nitrogenous heterocyclic compounds(Ⅰ)——Solid state reactions of 3-methyl-l-phenyl-5-pyrazolone with carbonyl compounds

The solid state reaction of 3-methyl-1-phenyl-5-pyrazolone (MPP) with aromatic aldehydes and ke-tones benzil derivatives and imides,and the solid state Michael addition reaction of MPP with 4-arylidene-3-methyl-1-phenyl-5-pyrnzolone 2 were investigated.Some new solid state reactions between the reactants were found,from which a series of new compounds were obtained The structures of the products were identified by IR,1H NMR,MS,elemental analyses and also by X-ray crystal analysis,and the reaction mechanism of MPP with aromatic aldehydes and ketones was proposed     

Ω型分子筛脱铝的核磁共振研究

在不同投料比（ＳｉＯ２／Ａｌ２Ｏ３＝１３．８，１９及２１）条件下，合成了三种Ω型分子筛原粉．对投料比为１３．８的原粉样品进行了四种不同方式的脱铝处理，即水热、ＳｉＣｌ４、ＥＤＴＡ和（ＮＨ４）２ＳｉＦ６处理，而形成了系列脱铝Ω型分子筛样品．对原粉及其脱铝样品进行了２９Ｓｉ和２７ＡｌＭＡＳＮＭＲ测试，确定出样品骨架硅铝比和铝在两种晶体学不等价Ｔ位上的占据比率，以探索四种脱铝方法的效果．实验结果与分析表明：在所有样品中，铝原子的占据具有择优Ｂ位的倾向；且铝在ＴＡ与ＴＢ位上的占据比率与合成条件有关；四种处理方式对Ω型分子筛的脱铝效果不尽相同．     

Measurement of the half life of126Sn using a radiochemical method

The half-life of¹²⁶Sn has never been measured accurately. The value quoted in the literature is approximately 10⁵y, which was measured in 1958. In the present work we measured accruately the half life of¹²⁶Sn to be (2.5±0.2)×10⁵y using a radiochemical method.     

Facile fabrication of AgCl@polypyrrole-chitosan core-shell nanoparticles and polymeric hollow nanospheres

A one-step sequential method for preparing AgCl@polypyrrole-chitosan core-shell nanoparticles and subsequently the formation of polypyrrole-chitosan hollow nanospheres is reported. The formation of the core and the shell is performed in one reaction medium almost simultaneously. Transmission electron microscopy (TEM) images show the presence of core-shell nanoparticles and hollow nanospheres. Ultraviolet-visible (UV-vis) studies reveal that AgCl was formed first followed by polypyrrole. X-ray diffration (XRD) and UV-vis studies show that AgCl was present in the core-shell nanoparticles and could be removed completely from the core.     

Infrared imaging as a means of visually characterizing the thermoacoustic onset process influenced by a Helmholtz resonator

A Helmholtz resonator can be used as a transmission part to connect the thermoacoustic engine (TE) with its load. However, the resonator can significantly influence the performance of the TE. In order to investigate the impact of a Helmholtz resonator on the onset process of a TE, infrared (IR) imaging is firstly used as a visualization method to characterize the onset mechanism. The influence of dimensions of the Helmholtz resonator on the onset process are analyzed experimentally and theoretically. Results show that the Helmholtz resonator reduces the pressure amplitude at the onset moment and increases the onset temperature of the TE, both of which depend on the acoustic power absorbed from the TE. Onset without a sudden increase of pressure amplitude is observed with the Helmholtz resonator at resonance length. This paper shows that IR imaging is an effective way to characterize the temperature distribution in a TE study.     

聚四氟乙烯和石墨对聚醚酰亚胺摩擦学性能的影响

将聚四氟乙烯(PTFE)和石墨两类减摩耐磨填料填充到聚醚酰亚胺(PEI)中,表征其摩擦性能,利用扫描电子显微镜分析了磨损表面的显微结构,并分析了磨损机制.研究结果表明,PTFE和石墨的填充明显改善了PEI的摩擦磨损性,摩擦系数降低到0.3以下(纯PEI的摩擦系数为0.41),磨损率降低了3个数量级.在PTFE体系中,PTFE质量分数为10%时,PEI基共混材料的摩擦系数最低为0.23;而在质量分数为15%的石墨体系中,PEI基共混材料摩擦系数最低为0.27.磨损率随着填料含量的增加而逐渐下降,在填料质量分数为20%之后,摩损率下降平缓.因此PTFE和石墨的填充对PEI的摩擦学性能起到了很好的改善作用,而且PTFE比石墨的改善效果更优益.共混物的机械性能测试结果表明,在填料质量分数为5%~15%时,共混物具有良好的机械性能.     

Gold(I)‐Catalyzed Diazo Coupling: Strategy towards Alkene Formation and Tandem Benzannulation

A gold(I)‐catalyzed cross‐coupling of diazo compounds to afford tetrasubstituted alkenes has been developed by taking advantage of a trivial electronic difference between two diazo substrates. A N‐heterocyclic‐carbene‐derived gold complex is the most effective catalyst for this transformation. Based on this new strategy, a gold(I)‐initiated benzannulation has been achieved through a tandem reaction involving a diazo cross‐coupling, 6π electrocyclization, and oxidative aromatization.