Adducts of Rh2[MTPA]4 with some phosphine chalcogenides: nature of binding and ligand exchange

Adducts of four phosphine chalcogenides with the chiral dirhodium complex ([Rh-Rh]) were investigated by variable-temperature 1H and 31P NMR spectroscopy in order to compare their properties as axial ligands. Whereas the selenide (1) and the sulfide (2) are strong ligands with electrostatic attraction and, in addition, a significant orbital (HOMO-LUMO) interaction, the phosphine oxide compounds (P=O) bind primarily via electrostatic attraction and are relatively weak donors. Moreover, the overall bond strength in these adducts depends on steric congestion around the P=O group.     

Sigma-aromaticity and sigma-antiaromaticity in saturated inorganic rings

The magnetic properties of a series of inorganic saturated rings, (SiH2)n, (GeH2)n, (NH)n, (PH)n, (AsH)n, On, Sn, and Sen (n = 3-6), exhibit zigzag behavior with ring size resembling that of aromatic and antiaromatic Hückel pi-systems and (CH2)n rings. Computed GIAO-SCF nucleus-independent chemical shifts (NICS) and localized (LMO) NICS analysis indicate that the sigma-ring electrons are chiefly responsible for this zigzag behavior. This evidence for sigma-aromaticity is further supported by theoretical strain energy (TSE). The Hückel 4n + 2/4n aromaticity/antiaromaticity rule for pi-electron systems applies well to the smaller saturated rings.     

Nonnucleosidic Base Surrogates: The Effect of 1,2‐Disubstituted Phenanthrenes on DNA Duplex Stability

Phenanthrene‐1,2‐dimethanol was incorporated into oligodeoxynucleotides via formation of phosphodiester bonds (cf. Scheme 1). If placed at internal positions in a DNA duplex, a strong reduction of duplex stability is observed (Table 1). Terminal attachment of stretches of phenanthrene residues, however, leads to a substantial increase in stability. The stabilization is attributed to a cooperative interaction of the phenanthrene residues of the two strands rather than to dangling end effects. Chimeric oligomers containing a stretch of six phenanthrene residues show two separate transitions (Table 2): one arising from the denaturation of the DNA stem (observable by a hyperchromic effect at 260 nm) and a second one from the denaturation of the phenanthrene part (observable by temperature‐dependant gel mobility assays). Based on these findings, a model of the chimeric hybrids is proposed, in which the phenanthrene residues stack in a zipper‐like manner on top of the DNA base pairs without disrupting the B‐form of the DNA stem (see Fig. 7).     

Solvent-extraction and Langmuir-adsorption-based transport in chemically functionalized nanopore membranes

We have investigated the transport properties of nanopore alumina membranes that were rendered hydrophobic by functionalization with octadecyltrimethoxysilane (ODS). The pores in these ODS-modified membranes are so hydrophobic that they are not wetted by water. Nevertheless, nonionic molecules can be transported from an aqueous feed solution on one side of the membrane, through the dry nanopores, and into an aqueous receiver solution on the other side. The transport mechanism involves Langmuir-type adsorption of the permeating molecule onto the ODS layers lining the pore walls, followed by solid-state diffusion along these ODS layers; we have measured the diffusion coefficients associated with this transport process. We have also investigated the transport properties of membranes prepared by filling the ODS-modified pores with the water-immiscible (hydrophobic) liquid mineral oil. In this case the transport mechanism involves solvent extraction of the permeating molecule into the mineral oil subphase confined with the pores, followed by solution-based diffusion through this liquid subphase. Because of this different transport mechanism, the supported-liquid membranes show substantially better transport selectivity than the ODS-modified membranes that contain no liquid subphase.     

Iteratively reweighted least squares and slime mold dynamics: connection and convergence

Mathematical Programming - We present a connection between two dynamical systems arising in entirely different contexts: the Iteratively Reweighted Least Squares (IRLS) algorithm used in compressed...     

Key aspects of crystalline Mo-V-O-based catalysts active in the selective oxidation of propane

Mo-V-O-based complex metal oxide catalysts were synthesized hydrothermally for the first time, characterized structurally and tested in the selective oxidation of propane to acrylic acid, and the results obtained were compared on the basis of catalyst crystal structures in order to clarify key aspects of alkane selective oxidation over multifunctional metal oxide catalysts. The catalysts tested were black solids of rod-shaped crystals, which had a layer structure in the direction of fiber axis and various high dimensional arrangements of metal octahedra in the cross-section plane. A strong dependency on the octahedra arrangements and a facet dependency were observed, and the roles of metal elements in the course of selective oxidation of propane were clarified by comparing the catalytic performance of various Mo-V-O-based catalysts. We discuss the multi-functional character derived from high dimensional structures of the catalysts and mechanism of the selective oxidation of propane.     

Ferrocenecarbothioamide and N-ethoxycarbonylferrocenecarbothioamide: Synthesis, structure and application in synthesis of 2,4-diferrocenylthiazole

Ferrocenecarbothioamide (1) and its N-ethoxycarbonyl derivative (2) were synthesised by a Friedel-Crafts type reaction of ferrocene with potassium thiocyanate and ethoxycarbonyl isothiocyanate, respectively, in a strongly acidic medium. The X-ray structure of 1 was determined and shows conjugation between the ferrocene moiety and the thioamido group. Compound 1 reacts with chloroacetylferrocene affording 2,4-diferrocenylthiazole, whose structure was determined by X-ray diffraction and electronic properties studied by cyclic voltammetry.     

On the viability of small endohedral hydrocarbon cage complexes: X@C4H4, X@C8H8, X@C8H14, X@C10H16, X@C12H12, AND X@C16H16

Small hydrocarbon complexes (X@cage) incorporating cage-centered endohedral atoms and ions (X = H(+), H, He, Ne, Ar, Li(0,+), Be(0,+,2+), Na(0,+), Mg(0,+,2+)) have been studied at the B3LYP/6-31G(d) hybrid HF/DFT level of theory. No tetrahedrane (C(4)H(4), T(d)()) endohedral complexes are minima, not even with the very small hydrogen atom or beryllium dication. Cubane (C(8)H(8), O(h)()) and bicyclo[2.2.2]octane (C(8)H(14), D(3)(h)()) minima are limited to encapsulating species smaller than Ne and Na(+). Despite its intermediate size, adamantane (C(10)H(16), T(d)()) can enclose a wide variety of endohedral atoms and ions including H, He, Ne, Li(0,+), Be(0,+,2+), Na(0,+), and Mg(2+). In contrast, the truncated tetrahedrane (C(12)H(12), T(d)()) encapsulates fewer species, while the D(4)(d)() symmetric C(16)H(16) hydrocarbon cage (see Table of Contents graphic) encapsulates all but the larger Be, Mg, and Mg(+) species. The host cages have more compact geometries when metal atoms, rather than cations, are inside. This is due to electron donation from the endohedral metals into C-C bonding and C-H antibonding cage molecular orbitals. The relative stabilities of endohedral minima are evaluated by comparing their energies (E(endo)) to the sum of their isolated components (E(inc) = E(endo) - E(cage) - E(x)) and to their exohedral isomer energies (E(isom) = E(endo) - E(exo)). Although exohedral binding is preferred to endohedral encapsulation without exception (i.e., E(isom) is always exothermic), Be(2+)@C(10)H(16) (T(d)(); -235.5 kcal/mol), Li(+)@C(12)H(12) (T(d)(); 50.2 kcal/mol), Be(2+)@C(12)H(12) (T(d)(); -181.2 kcal/mol), Mg(2+)@C(12)H(12) (T(d)(); -45.0 kcal/mol), Li(+)@C(16)H(16) (D(4)(d)(); 13.3 kcal/mol), Be(+)@C(16)H(16) (C(4)(v)(); 31.8 kcal/mol), Be(2+)@C(16)H(16) (D(4)(d)(); -239.2 kcal/mol), and Mg(2+)@C(16)H(16) (D(4)(d)(); -37.7 kcal/mol) are relatively stable as compared to experimentally known He@C(20)H(20) (I(h)()), which has an E(inc) = 37.9 kcal/mol and E(isom) = -35.4 kcal/mol. Overall, endohedral cage complexes with low parent cage strain energies, large cage internal cavity volumes, and a small, highly charged guest species are the most viable synthetic targets.     

Biogenic Synthesis of CuO,ZnO, and CuO–ZnO Nanoparticles Using Leaf Extracts of Dovyalis caffra and Their Biological Properties

Biogenic metal oxide nanoparticles (NPs) have emerged as a useful tool in biology due to their biocompatibility properties with most biological systems. In this study, we report the synthesis of copper oxide (CuO), zinc oxide (ZnO) nanoparticles (NPs), and their nanocomposite (CuO–ZnO) prepared using the phytochemical extracts from the leaves of Dovyalis caffra (kei apple). The physicochemical properties of these nanomaterials were established using some characterization techniques including X-ray diffraction analysis (XRD), ultraviolet-visible spectroscopy (UV-vis), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and energy-dispersive X-ray spectroscopy (EDX). The XRD result confirmed the presence of a monoclinic CuO (Tenorite), and a hexagonal ZnO (Zincite) nanoparticles phase, which were both confirmed in the CuO–ZnO composite. The electron microscopy of the CuO–ZnO, CuO, and ZnO NPs showed a mixture of nano-scale sizes and spherical/short-rod morphologies, with some agglomeration. In the constituent’s analysis (EDX), no unwanted peak was found, which showed the absence of impurities. Antioxidant properties of the nanoparticles was studied, which confirmed that CuO–ZnO nanocomposite exhibited better scavenging potential than the individual metal oxide nanoparticles (CuO, and ZnO), and ascorbic acid with respect to their minimum inhibitory concentration (IC₅₀) values. Similarly, the in vitro anticancer studies using MCF7 breast cancer cell lines indicated a concentration-dependent profile with the CuO–ZnO nanocomposite having the best activity over the respective metal oxides, but slightly lower than the standard 5-Fluorouracil drug.     

The kinetics of the E-Z-E isomerisation and liquid-crystalline properties of selected azobenzene derivatives investigated by the prism of the ester group inversion

Two new groups of azobenzene ester derivatives were synthesised: alkyl 4-[4-(nonyloxy)phenyl]diazenyl]benzoates and 4-[4-(nonyloxy)phenyl]diazenyl]phenyl alkanoates. All 35 presented homologues are mesogenic. Moreover, some of the above-mentioned compounds exhibit rich liquid-crystalline polymorphism likewise tetramorphism. During this investigation by the use of polarising optical microscopy, differential scanning calorimetry and X-Ray studies, six types of mesophases were detected: nematic, smectics (A, C, I, F) and G. Furthermore, due to the presence of the photosensitive azo moiety, the E–Z isomerisation reaction is possible. This process, which is initiated by the UV irradiation, causes significant changes in the UV-Vis absorption spectra of investigated compounds. However, the photoisomerisation is a reversible process and in the dark the thermal relaxation of Z isomer takes place. Based on the achieved data, the kinetic constants of the isomerisation and relaxation processes were calculated. It shows that conversion of the ester bond makes some changes in the optical properties. The shift of about 7 nm of the absorbance maximum was observed. Surprisingly, the inversion of the ester group has significant influence on the liquid-crystalline polymorphism replacing one mesophase (for benzoates) into four (for alkanoates).