Thermal decomposition of sodium nitrite and sodium nitrate pre-adsorbed on TiO2 surfaces

The thermal decomposition of sodium nitrite or nitrate pre-adsorbed upon TiO₂ surfaces has been investigated by employing several techniques as infrared spectroscopy (IR) and temperature programmed desorption in conjunction with mass spectrometry analysis (TPD-MS) to study the features observed during these thermal decompositions. Differential thermal analysis (DTA) in combination with X-ray diffraction analysis (XRD) were used to investigate the possibility of a solid state chemical reaction between the solid products originated from the thermal decomposition of the pre-adsorbed species and the TiO₂. On the basis of our results, various characteristic features of these thermal decomposition reactions will be discussed.This work was supported by JUNTA DE ANDALUCIA (financial support for research groups/1990).     

Determination of pKa values of tenoxicam from H NMR chemical shifts and of oxicams from electrophoretic mobilities (CZE) with the aid of programs SQUAD and HYPNMR

In this work it is explained, by the first time, the application of programs SQUAD and HYPNMR to refine equilibrium constant values through the fit of electrophoretic mobilities determined by capillary zone electrophoresis experiments, due to the mathematical isomorphism of UV-vis absorptivity coefficients, NMR chemical shifts and electrophoretic mobilities as a function of pH. Then, the pK_a values of tenoxicam in H₂O/DMSO 1:4 (v/v) have been obtained from ¹H NMR chemical shifts, as well as of oxicams in aqueous solution from electrophoretic mobilities determined by CZE, at 25 °C. These values are in very good agreement with those reported by spectrophotometric and potentiometric measurements.     

Phenylphosphatrioxa-adamantanes: bulky, robust, electron-poor ligands that give very efficient rhodium(I) hydroformylation catalysts

The cage phosphines 1,3,5,7-tetramethyl-6-phenyl-2,4,8-trioxa-6-phosphaadamantane (1a) and 1,3,5,7-tetraethyl-6-phenyl-2,4,8,trioxa-6-phosphaadamantane (1b) have been made by the acid catalysed addition of PhPH(2) to the appropriate beta-diketones; the acid used (HCl, H(3)PO(4) or H(2)SO(4)) and its concentration affect the rate and selectivity of these condensation reactions. Phosphines 1a and 1b react with [PdCl(2)(NCPh)(2)] to form complexes trans-[PdCl(2)(1a)(2)](2a) and trans-[PdCl(2)(1b)(2)](2b) as mixtures of rac and meso diastereoisomers. The platinum(II) chemistry is more complicated and when 1a or 1b is added to [PtCl(2)(cod)], equilibrium mixtures of trans-[PtCl(2)L(2)] and [Pt(2)Cl(4)L(2)](L = or ) are formed in CH(2)Cl(2) solution. Meso/rac mixtures of trans-[MCl(CO)(1a)(2)] M = Ir (6a) or Rh (7a) are formed upon treatment of MCl(3).nH(2)O with an excess of 1a and the anionic cobalt complex [NHEt(3)][CoCl(3)(1a)](9) was isolated from the product formed by CoCl(2).6H(2)O and 1a. The nu(CO) values from the IR spectra of 6a and 7a suggest that 1a resembles a phosphonite in its bonding to Rh and Ir. Crystal structures of meso-2a, meso-2b, rac-6a and 9 are reported and in each case a small intracage C-P-C angle of ca. 94 degrees is observed; this may partly explain the bonding characteristics of ligands 1a and 1b. The cone angles for 1a and 1b are similar and large (ca. 200 degrees). Rhodium complexes of ligands 1a and 1b are hydroformylation catalysts with similarly high activity to catalysts derived from phosphites. The catalysts derived from 1a and 1b gave unusually low linear selectivity in the hydroformylation of hexenes. This feature has been further exploited in quaternary-selective hydroformylations of unsaturated esters; catalysts derived from 1a give better yields and regioselectivities than any previously reported catalyst.     

2-Metylthiazolium salts as 1,4-dinucleophiles. Thiazolo[3,2-a]pyridinium salts from westphal condensation

Condensation of 2-methylthiazoliura salts with 1,2-dicarbonyls in the presence of base, yielded thiazolo-[3,2-a]pyridinium derivatives. Results with different substrates are discussed.     

A new antimalarial polyether from a marine Streptomyces sp. H668

The antimalarial guided fractionation of the culture of marine Streptomyces sp. strain H668 led to the isolation of a new polyether metabolite. The structure was determined by comprehensive NMR and MS assignments. This new metabolite showed in vitro antimalarial activity against both the chloroquine-susceptible (D6) and-resistant (W2) clones of Plasmodium falciparum, without cytotoxicity to normal cells (Vero) making it a promising first lead from this marine bacterium.     

Imprinted nanoporous organosilicas for selective adsorption of nitroenergetic targets

Periodic mesoporous organosilicas incorporating diethylbenzene bridges in their pore walls were applied for the adsorption of nitroenegetic targets from aqueous solution. The materials were synthesized by co-condensing 1,4-bis(trimethoxysilylethyl)benzene (DEB) with 1,2-bis(trimethoxysilyl)ethane to improve structural characteristics. Molecular imprinting of the pore surfaces was employed through the use of a novel target-like surfactant to further enhance selectivity for targets of interest (tri- and dinitrotoluenes) over targets of similar structure ( p-cresol and p-nitrophenol). The headgroup of the commonly used alkylene oxide surfactant Brij76 was modified by esterification with 3,5-dinitrobenzoyl chloride. This provided a target analogue which was readily miscible with the Brij76 surfactant micelles used to direct material mesopore structures. The impact of variations in precursor ratios and amounts of imprint molecule was evaluated. The use of 12.5% of the modified Brij surfactant with a co-condensate employing 30% DEB was found to provide the best compromise between total capacity and selectivity for nitroenergetic targets.     

Development of a capillary electrophoresis method for the characterization of "palo azul" (Eysenhardtia polystachya)

The tree Eysenhardtia polystachya (Ortega) Sarg. has quite a wide popular use within the traditional Mexican medicine as herbal remedy. Popular practices constitute a relevant enough basis to design optimum analytical methods in order to determine basic principles of diverse medicinal plants. This has become one of the essentials needed to characterize such products, for which it is fundamentally important to develop an efficient and reliable separation method. This work presents the results concerning the development and optimization of a novel CE method for the separation of components from water/etanol (1:1) extracts of E. polystachya, using the following conditions, considered the best obtained: phosphate buffer 10 mM, 20 kV voltage, and pH 8.1 at 214 nm and 50 mM, 12.5 kV voltage with pH 8.1 at 426 nm. The optimization takes into account the parameters associated in the resulting electropherograms, such as number of peaks, migration times, and the Deltat(m) of the neighboring peaks. Under optimal conditions the separation intended was attained within 15 and 20 min for 214 and 426 nm, respectively. The characterization method developed was applied to the analysis of diverse extracts of E. polystachya.     

On integral points on degree four del Pezzo surfaces

We report on our investigations concerning algebraic and transcendental Brauer–Manin obstructions to integral points on complements of a hyperplane section in degree four del Pezzo surfaces. We discuss two concepts of an obstruction at an archimedean place. Concrete examples are given of pairs of non-homogeneous quadratic polynomials in four variables representing (0, 0) over Q and over Z _p for all primes p, but not over Z. By blow-up, these yield cubic polynomials in three variables all integral solutions of which satisfy a gcd condition.     

Influence of the Nature of Iron, Aluminium and Yttrium Organometallic Nanocluster Precursors on the Formation Mechanism of Ceramic ZrO2 Obtained by Sol-Gel Method

To obtain new effective precursors for single phase ceramic zirconia materials by the alkoxide route, three heterometallic iron-yttrium acetylacetonate complexes were synthesized by electrochemical anodic dissolution in acetylacetone. The structure and properties of the synthesized complex oxides were studied by XRD, EXAFS, magnetic susceptibility and Mössbauer. It was shown that, for iron-containing gels and oxides, Fe³⁺ ions—interchangeably with Y³⁺—participate in the oxide formation mechanism. The sets of interatomic distances found by EXAFS in the iron-yttrium precursor and in the zirconia gel are practically equal. The presence of structure fragments formed by these interactions—and especially by direct Fe-Y bonds in the precursors—allows single-phase triple ceramic oxides to form.     

Structure and texture of AlPO4-cesium oxide (20 wt.%) catalysts obtained by impregnation with cesium chloride

Crystalline and amorphous vanadyl polyphosphates (VO(PO₃)₂) with a P/V ratio=2 were used as catalysts in the ammoxidation of toluene. The crystalline specimens exhibit a rather low activity compared with the amorphous solid. The benzonitrile selectivities always reached nearly 90%. Noticeable benzaldehyde amounts were detected that could be due to an inadequate ammonia activation on the solid surface.