排序方式: 共有27条查询结果,搜索用时 46 毫秒
1.
2.
采用涂覆法在镁锂合金表面制备了含双-[3-(三乙氧基硅)丙基]四硫化物(KH-69硅烷)改性纳米ZrO2的环氧树脂涂层. 通过傅里叶变换红外光谱(FTIR)、 扫描电子显微镜(SEM)和电化学阻抗谱(EIS)等手段表征了该涂层. 考察了KH-69硅烷改性纳米ZrO2浓度对环氧树脂涂层耐蚀性能的影响. 结果表明, KH-69硅烷改性纳米ZrO2能显著提高镁锂合金表面环氧树脂涂层的耐腐蚀性能, 其中1.0%(质量分数) KH-69硅烷改性纳米ZrO2环氧树脂涂层具有较好的耐蚀性能. 在NaCl溶液中浸渍528 h后的低频阻抗值为1.6×109 Ω·cm2, 相比在NaCl溶液中浸渍240 h的纯环氧树脂涂层提高约5个数量级. 相似文献
3.
4.
5.
Triticale straw(TS) and refined triticale straw(RTS) were characterized by scanning electron microscope(SEM), Fourier transform infrared spectroscopy(FTIR) and thermogravimetric analysis(TGA) in detail, and their application in polypropylene(PP) composite was explored. RTS was obtained by refining TS with environmentally benign processes, by which hemicelluloses and lignin were effectively removed. This was proved by FTIR analysis. The effect of cellulose content on the composite thermal stability and mechanical properties was also examined. RTS has better thermal stability than TS because RTS has lower flammable noncellulose ratio. T5%(temperature with mass loss of 5%) of RTS could be more than 200℃. It is high enough to meet the requests of processing most polyolefin composites. Both TS and RTS acted as nucleating agents in PP crystallization process. TS was proved to be a filler of the composite, and RTS to be a reinforcing material for the composite. The flexural strength and modulus of RTS/PP increased about by 5% and more than 100%, respectively, compared with those of PP, when the mass fraction of RTS and compatibilizer were 30% and 2%, respectively. The thermal stability of RTS/PP composites was also better than that of TS/PP composites. 相似文献
6.
微悬臂梁是一种高灵敏度的生化传感器。本文考虑吸附表面应力引起的中性层位置的变化,采用能量法建立了微悬臂梁在单层分子吸附稳定后的静态弯曲模型,并以表面吸附有水蒸汽分子的微悬臂梁为例,研究了微悬臂梁曲率半径随其厚度、杨氏模量及吸附分子间距的变化规律以及中性层位置变化对微悬臂梁传感器性能预测的影响,结果发现:1)微悬臂梁的曲率半径与其杨氏模量、厚度及吸附分子间距之间可以近似用一次、二次和八次函数关系表示;2)中性层变化导致的曲率半径计算误差,随着微悬臂梁厚度、杨氏模量的增加而减小,但影响较小,而吸附分子间距会对该相对误差产生明显影响;3)中性层位置变化会对微悬臂梁传感器灵敏度和表面应变预测产生明显的影响。 相似文献
7.
固液界面的表面电荷会影响微纳流体系统的流体阻力,因此如何测量固液界面的表面电荷密度以及分析表面电荷的产生机理对于研究表面电荷对流体阻力的影响具有较大的意义。提出了一种基于接触式AFM的固液界面表面电荷密度测量方法。基于该方法测量了浸在去离子水和0.01mol/L的NaCl溶液中的高硼硅玻璃和二氧化硅样本的表面电荷密度,并研究了溶液pH值对表面电荷的影响。研究结果表明高硼硅玻璃和二氧化硅由于表面硅烷基的电离带负电。溶液pH值和离子浓度的增加都会增加浸在去离子水和0.01mol/L的NaCl溶液中高硼硅玻璃和二氧化硅的表面电荷密度的绝对值。 相似文献
8.
本文研究了标准石墨管、涂钨和涂锆石墨管中锗原子吸光度,吸收信号形状和原子消失速度的变化。实验表明,在涂钨和涂锆石墨管中锗的分析灵敏度有较大的提高。同时实验测得在涂钨石墨管中锗的出现温度为1770K。按公式ΔH°=γTapp求得锗的ΔH°=106.2kcal/mol。它与锗的升华热89.5kcal/mol相近。因此,在涂钨石墨管中锗原子的形成是GeO2被碳化钨还原成金属锗,随后锗的升华。 相似文献
9.
The last decade has witnessed an important role of magneto-rheological dampers in the semi-active vibration control on the basis of empirical models. Those models established by fitting experimental data, however, do not offer any explicit expressions for the stiffness and the damping of magneto-rheological dampers. Hence, it is not easy for engineers to get any intuitive information about the effects of stiffness and damping of a magneto-rheological damper on the dynamic performance of a controlled system. To manifest the nonlinear properties of a magneto-rheological damper, this paper presents the hysteretic phenomena and the additional nonlinear stiffness of a typical magneto-rheological damper in terms of equivalent linear stiffness and equivalent linear damping. Then, it gives a brief discussion about the effect of nonlinear stiffness on the vibration control through the numerical simulations and an experiment for the semi-active suspension of a quarter car model with a magneto-rheological damper installed. Both numerical simulations and experimental results show that the additional nonlinear stiffness in the magneto-rheological damper is remarkable, and should be taken into consideration in the design of vibration control. 相似文献
10.