Discrimination of carbonyl groups of meso-α-diketones with Horner-Wadsworth-Emmons reagent of chiral binaphthyl esters

Asymmetric Horner-Wadsworth-Emmons reactions of selected meso-α-dicarbonyl compounds with chiral phosphonate reagents, which possessed axially dissymmetric 1,1′-bi-2- or 8-naphthol at the carboxylate moiety as a chiral auxiliary, were examined. The reactions proceeded smoothly with good chemical yields as well as with high diastereoselectivities. Z-olefins were preferentially formed, and it was found that the free hydroxy group at the 2′- or 8′-position on the naphthalene ring plays a crucial role in the high diastereoselectivity, probably due to a complex-induced proximity effect. Mechanistic considerations are also described.     

Single-ion magnetism in the extended solid-state: insights from X-ray absorption and emission spectroscopy

Large single-ion magnetic anisotropy is observed in lithium nitride doped with iron. The iron sites are two-coordinate, putting iron doped lithium nitride amongst a growing number of two coordinate transition metal single-ion magnets (SIMs). Uniquely, the relaxation times to magnetisation reversal are over two orders of magnitude longer in iron doped lithium nitride than other 3d-metal SIMs, and comparable with high-performance lanthanide-based SIMs. To understand the origin of these enhanced magnetic properties a detailed characterisation of electronic structure is presented. Access to dopant electronic structure calls for atomic specific techniques, hence a combination of detailed single-crystal X-ray absorption and emission spectroscopies are applied. Together K-edge, L_2,3-edge and Kβ X-ray spectroscopies probe local geometry and electronic structure, identifying iron doped lithium nitride to be a prototype, solid-state SIM, clean of stoichiometric vacancies where Fe lattice sites are geometrically equivalent. Extended X-ray absorption fine structure and angular dependent single-crystal X-ray absorption near edge spectroscopy measurements determine Fe^I dopant ions to be linearly coordinated, occupying a D_6h symmetry pocket. The dopant engages in strong 3dπ-bonding, resulting in an exceptionally short Fe–N bond length (1.873(7) Å) and rigorous linearity. It is proposed that this structure protects dopant sites from Renner–Teller vibronic coupling and pseudo Jahn–Teller distortions, enhancing magnetic properties with respect to molecular-based linear complexes. The Fe ligand field is quantified by L_2,3-edge XAS from which the energy reduction of 3d_z² due to strong 4s mixing is deduced. Quantification of magnetic anisotropy barriers in low concentration dopant sites is inhibited by many established methods, including far-infrared and neutron scattering. We deduce variable temperature L₃-edge XAS can be applied to quantify the J = 7/2 magnetic anisotropy barrier, 34.80 meV (∼280 cm⁻¹), that corresponds with Orbach relaxation via the first excited, M_J = ±5/2 doublet. The results demonstrate that dopant sites within solid-state host lattices could offer a viable alternative to rare-earth bulk magnets and high-performance SIMs, where the host matrix can be tailored to impose high symmetry and control lattice induced relaxation effects.

Taking advantage of synchrotron light source methods, we present the geometric and electronic structure of iron doped in lithium nitride.     

Structural studies of ammonia and metallic lithium-ammonia solutions

The technique of hydrogen/deuterium isotopic substitution has been used to extract detailed information concerning the solvent structure in pure ammonia and metallic lithium-ammonia solutions. In pure ammonia we find evidence for approximately 2.0 hydrogen bonds around each central nitrogen atom, with an average N-H distance of 2.4 A. On addition of alkali metal, we observe directly significant disruption of this hydrogen bonding. At 8 mol % metal there remains only around 0.7 hydrogen bond per nitrogen atom. This value decreases to 0.0 for the saturated solution of 21 mol % metal, as all ammonia molecules have then become incorporated into the tetrahedral first solvation spheres of the lithium cations. In conjunction with a classical three-dimensional computer modeling technique, we are now able to identify a well-defined second cationic solvation shell. In this secondary shell the nitrogen atoms tend to reside above the faces and edges of the primary tetrahedral shell. Furthermore, the computer-generated models reveal that on addition of alkali metal the solvent molecules form voids of approximate radius 2.5-3.0 A. Our data therefore provide new insight into the structure of the polaronic cavities and tunnels, which have been theoretically predicted for lithium-ammonia solutions.     

Rhodamine B amine as a highly sensitive fluorescence derivatization reagent for saccharides in reversed-phase liquid chromatography

6-Rhodamine B amine functions as a highly sensitive fluorescence derivatization reagent for mono- and oligosaccharides; it reacts with the reducing end of saccharides under acidic conditions. The fluorescent derivatives of five monosaccharides can be separated within 25 min by reversed-phase liquid chromatography with isocratic elution. The detection limits (S/N = 3) for mono-, di-, and oligosaccharides are 7-51, 13, and 9-35 fmol/20 microl injection, which correspond to analyte concentrations of 35-255, 65, 45-175 nM, respectively. We have applied this derivatization method successfully to the analysis of the components of oligosaccharides in glycoproteins (ribonuclease B and fetuin) following their acidic or enzymatic hydrolysis. The results from these analyses are in good agreements with the reported values established previously.     

Effect of omega-hydrogenation on the adsorption of fluorononanols at the hexane/water interface: pressure effect on the adsorption of fluorononanols

The interfacial tension gamma of the hexane solution of 1H,1H-perfluorononanol (FDFC(9)OH) and its omega-hydrogenated analogue, 1H,1H,9H-perfluorononanol (HDFC(9)OH), against water was measured as a function of pressure and concentration at 298.15 K in order to clarify the effect of omega-dipole on the orientation of fluorononanol molecules from the viewpoint of volume. The adsorbed films of both alcohols exhibit two kinds of phase transitions among three different states: the gaseous, expanded, and condensed states. The partial molar volume changes of adsorption - in the expanded and condensed states were evaluated and compared between the two systems. The - values of both alcohols are negative, and thus the alcohol molecules have smaller volume in the adsorbed film than in the bulk solution. Furthermore, the value was obtained through the evaluation of by the density measurement of the bulk hexane solution. It was found that the value of HDFC(9)OH is smaller than that of FDFC(9)OH in the condensed state. On the basis of three matters concerning the molecular structure of alcohols, the occupied area at the interface, and the orientation of FDFC(9)OH in the adsorbed film deduced from the earlier results of X-ray reflectivity measurement, the mean tilt angle of HDFC(9)OH from the interface normal in the condensed film was estimated to be 15 degrees . The thermodynamic estimation demonstrated here is highly valuable one to provide structure information on an adsorbed film.     

Estimation of useful yields for electrospray droplet impact/secondary ion mass spectrometry (EDI/SIMS)

Useful yield for electrospray droplet impact/secondary ion mass spectrometry was estimated. The mixtures of C₆₀/rhodamine B and C₆₀/Aerosol OT were used as the samples for the positive and negative mode of operations, respectively. By assuming that (i) the desorption efficiencies are about the same for C₆₀, rhodamine B and Aerosol OT, and (ii) desorption of ionic compounds directly gives the secondary ion signals, the useful yields (i.e. total ions generated divided by the total molecules desorbed) for C₆₀ were estimated to be ~0.1. This value should be regarded as the upper limit because the neutralization of positive and negative ions in the plume and desorption of ionic compounds as neutral species are not taken into account. Copyright © 2012 John Wiley & Sons, Ltd.     

Fully automated reagent peak‐free liquid chromatography fluorescence analysis of highly polar carboxylic acids using a column‐switching system and fluorous scavenging derivatization

In this study, we combined a column‐switching system with a fluorous scavenging derivatization method to develop a fully automated reagent peak‐free LC fluorescence detection protocol for the analysis of highly polar carboxylic acids. In this method, highly polar carboxylic acids were derivatized with fluorescent 1‐pyrenemethylamine in the presence of 1‐ethyl‐3‐(3‐dimethylaminopropyl)carbodiimide and 1‐hydroxy‐1H‐benzotriazole. Residual excess of the unreacted reagent was tagged with 2‐(perfluorooctyl)ethyl isocyanate and then removed selectively using a fluorous column‐switching system placed in front of an analytical reversed‐phase column. The signal of the fluorous‐tagged unreacted reagent was completely absent in the resulting chromatograms; therefore, it did not interfere with the quantification of each acid especially those eluted before 20 min. The detection limits (S/N = 3) for the examined acids were in the range from 4.0 to 22 fmol per injection. We have applied this method to comparative analysis of highly polar carboxylic acids in urine samples obtained from diabetes mellitus type‐II model mice and their control.     

Complex formation of light and heavy lanthanides with DGA and DOODA,and its application to mutual separation in DGA–DOODA extraction system

We studied the stepwise formation constants (β) of water-soluble diglycolamide (DGA) and dioxaoctanediamide (DOODA) for the mutual separation of Ln in a solvent extraction system. TODGA (N,N,N?,N?-tetraoctyl-diglycolamide) and DOODA(C8) (N,N,N?,N?-tetraoctyl-dioxaoctanediamide) exhibit opposite behaviors in extracting both light and heavy Ln through Ln-patterns. Metal complexes of two- and three-folding with water-soluble DOODA and DGA, respectively, were found, and each β value was calculated using distribution ratios. Taking β, their distribution ratio, D, and separation factor, SF, values into consideration, the suitable separation conditions (aqueous phase: 30 mM DOODA(C2) in 1 M HNO₃; organic phase: 0.1 M TODGA in n-dodecane) of multistage extraction (10?×?10 extraction using aqueous and organic phases, including one sample solution) were determined. In this study, La, Pr, and Nd were mainly present in the aqueous phase, whereas Sm–Dy existed in the organic phase. Although these two groups can be easily separated into two phases, the resolution, Rs, values provide for little mutual separation between La–Nd and Sm–Dy under the present conditions.

     

meso‐(2‐Pyridyl)‐boron(III)‐subporphyrin: Perimeter Iridium(III) Coordination

Peripherally metalated porphyrinoids are promising functional π‐systems displaying characteristic optical, electronic, and catalytic properties. In this work, 5‐(2‐pyridyl)‐ and 5,10,15‐tri(2‐pyridyl)‐B^III‐subporphyrins were prepared and used to produce cyclometalated subporphyrins by reactions with [Cp*IrCl₂]₂, which proceeded through an efficient C?H activation to give the corresponding mono‐ and tri‐Ir^III complexes, respectively. While the mono‐Ir^III complex was obtained as a diastereomeric mixture, a C₃‐symmetric tri‐Ir^III complex with the three Cp*‐units all at the concave side was predominantly obtained in a high yield of 90 %, which displays weak NIR phosphorescence even at room temperature in degassed CH₂Cl₂, differently from the mono‐Ir^III complexes.     

Stable meso–meso‐Linked 2NH‐Corrole Radical Dimers as a Key Intermediate to Corrole Tape

While oxidation of 5,5′,15,15′‐tetramesityl‐10‐10′‐linked 3NH‐corrole dimer with DDQ gave the corresponding triply linked 2NH‐corrole tape, the use of an equimolar amount of p‐chloranil as a milder oxidant resulted in the formation of a 10‐10′‐linked neutral 2NH‐corrole radical dimer as a stable product. The stability of this peculiar product is ascribed largely to strong antiferromagnetic interaction of the two spins. Further oxidation of this diradical produced corrole tape, suggesting its involvement as a reaction intermediate to the corrole tape. Oxidation of 10‐10′‐linked bis‐pyridine‐coordinated Co^III corrole dimer with DDQ produced a cobalt corrole radical dimer and a doubly linked corrole dimer both as stable compounds bearing pyridine and cyanide axial ligands. This type of oxidative transformation involving neutral diradical intermediates is a unique reaction mechanism specific for corrole dimers.