Distributed feedback multipeak laser emission in Rhodamine 6G doped organic-inorganic hybrids

Organic-inorganic hybrid materials were prepared from an ureasil precursor (ureapropyltriethoxysilane designated as UPTES) and acrylic acid modified zirconium (IV) n-propoxide. Thin films containing rhodamine 6G (Rh6G) were prepared by spin-coating on glass substrates with different Zr:Si molar ratios (Zr:Si = 75:25, 50:50 and 25:75). Refractive index, thickness, number of propagating modes and attenuation coefficient were measured at 543.5, 632.8 and 1550 nm wavelengths by the prism coupling technique. Distributed feedback (DFB) laser effect was observed and studied as a function of films thickness and refractive index.     

Effect of Addition of MTES on the Structure of Siloxane-PPG Nanocomposites

Hybrid transparent and flexible siloxane-polypropyleneglycol (PPG) materials with covalent bonds between the inorganic (siloxane) and organic (polymeric) phases were prepared by sol-gel process. In order to improve the quality of the mechanical properties of these materials, different amounts of methyltriethoxysilane (MTES) were added to the initial sol. The effect of MTES addition on the structure of the composites was studied by Small-Angle X-Ray Scattering (SAXS) and ²⁹Si Nuclear Magnetic Resonance (²⁹Si NMR). In absence of MTES, SAXS spectra exhibit a peak that is assigned to spatial correlation due to short range order between the siloxane clusters embedded in the polymeric phase. The experimental results indicate that, for low MTES concentrations ([MTES]/[O] 0.8, O: ether-type oxygen of PPG), the silicon species resulting from hydrolysis and condensation of MTES fill the open spaces between polymeric chains, interacting with the ether-type oxygens. For larger MTES content ([MTES]/[O] 0.8), the number of free ether-type oxygen sites avalaible for reaction with such silicon species is not large enough. Consequently, a fraction of silicon species resulting from MTES addition graft to siloxane clusters formed by hydrolysis and condensation of the hybrid precursor. For all MTES concentrations the condensation degree of the siloxane phase, determined from ²⁹Si NMR spectroscopy, is high (>69%), as expected under neutral pH synthesis conditions.     

Characterization of an all Sol-Gel Electrochromic Device WO3/Ormolyte/CeO2-TiO2

Electrochemical lithium intercalation in thin films of CeO₂-TiO₂ and WO₃, prepared by the sol-gel technique was investigated with cyclic voltammetry and spectroelectrochemical techniques in propylene carbonate solutions. A solid state system having the configuration WO₃/Ormolyte/CeO₂-TiO₂ has been assembled. The solid electrolyte, an organically modified electrolyte (ormolyte), was prepared with different [O]/[Li] ratios. The transmittance variation of this system during a potentiostatic step from –0.7 V to 0.8 V was about 35% at 550 nm.     

Investigation of New Ion-Conducting ORMOLYTES: Structure and Properties

Two families of hybrid organic-inorganic composites exhibiting Li⁺ ionic conduction (ORMOLYTES) have been prepared by the sol-gel process. The first family, prepared from a mixture of 3-isocyanatopropyltriethoxysilane, O,O Bis (2-aminopropyl)-polyethyleneglycol (or O,O Bis (2-aminopropyl)-polypropyleneglycol) and lithium salt, presents chemical bonds between the organic and the inorganic phase and an ionic conductivity higher than 10^-4 S m^-1 at room temperature. Their properties have been related to their structure using liquid state NMR measurements of ⁷Li between -100°C and +100°C and the DMTA technique. In the second family, prepared by ultrasonic method from a mixture of tetraethoxysilane (TEOS), polyethyleneglycol (PEG) and lithium salt, the organic and inorganic phases are not chemically bonded. Ionic conductivity has been studied as a function of the polymer chain length and concentration. Values of up to 10^-2 S m^-1 at room temperature have been obtained (with a silica-PEG₃₀₀ system, PEG/TEOS = 40% in weight). Again, structure was investigated by liquid state ⁷Li NMR measurements.     

Evolution of rheological properties and local structure during gelation of siloxane-polymethylmethacrylate hybrid materials

Hybrid siloxane-polymethylmethacrylate (PMMA) nanocomposites with covalent bonds between the inorganic (siloxane) and organic (polymer) phases were prepared by the sol gel process through hydrolysis and polycondensation of 3-(trimethoxysilyl)propylmethacrylate (TMSM) and polymerization of methylmethacrylate (MMA) using benzoyl peroxide (BPO) as initiator. The effect of MMA, BPO and water contents on the viscoelastic behaviour of these materials was analysed during gelation by dynamic rheological measurements. The changes in storage (G′) and loss moduli (G′′), complex viscosity (η^*) and phase angle (δ) were measured as a function of the reaction time showing the viscous character of the sol in the initial step of gelation and its progressive transformation to an elastic gel. This study was complemented by ²⁹Si and ¹³C solid-state nuclear magnetic resonance (NMR/MAS) measurements of dried gel. The analysis of the experimental results shows that linear chains are formed in the initial step of the gelation followed by a growth of branched structures and formation of a three-dimensional network. Near the gel point this hybrid material demonstrates the typical scaling behaviour expected from percolation theory.     

Room Temperature Visible/Infrared Emission and Energy Transfer in Nd3+-Based Organic/Inorganic Hybrids

The photoluminescence features and the energy transfer processes of Nd³⁺-based siloxane-poly(oxyethylene) hybrids are reported. The host matrix of these materials, classed as di-ureasils, is formed by a siloxane backbone covalently bonded to polyether chains of two molecular weights by means of urea cross-links. The room-temperature photoluminescence spectra of these xerogels show a wide broad purple-blue-green band (350–570 nm), associated with the emitting centres of the di-ureasil host, and the typical near infrared emission of Nd³⁺ (700–1400 nm), assigned to the ⁴F_3/2 ⁴I_{9/2,11/2,13/2} transitions. Self-absorptions in the visible range, resonant with intra-4f³ transitions, indicate the existence of an energy conversion mechanism of visible di-ureasil emission into near infrared Nd³⁺ luminescence. The existence of energy transfer between the di-ureasil's emitting centres and the Nd³⁺ ions is demonstrated calculating the lifetimes of these emitting centres. The efficiency of that energy transfer changes both with the polymer molecular weight and the Nd³⁺ concentration.     

Investigation of New Ion Conducting Ormolytes Silica-Polypropyleneglycol

Two groups of hybrid organic-inorganic composites exhibiting ionic conduction properties, so called ORMOLYTES (organically modified electrolytes), have been prepared by the sol-gel process. The first group has been prepared from mixture of a lithium salt and 3-isocyanatopropyltriethoxysilane(IsoTrEOS),O,O-bis(2-aminopropyl)polypropyleneglycol. These materials produce chemical bonds between the organic (polymer) and the inorganic (silica) phases. The second group has been prepared by an ultrasonic method from a mixture of tetraethoxysilane (TEOS), polypropyleneglycol and a lithium salt. The organic and inorganic phases are not chemically bonded in these samples. The Li+ ionic conductivity, , of all these materials has been studied by AC impedance spectroscopy up to 100°C. Values of up to 10–6 –1 · cm–1 have been found at room temperature. A systematic study of the effects of lithium concentration, polymer chain length and the polymer to silica weight ratio on shows that there is a strong dependence of on the preparation conditions. The dynamic properties of the Li+ ion and the polymer chains as a function of temperature between –100 and 120°C were studied using 7Li solid-state NMR measurements. The ionic conductivity of both families are compared and particular attention is paid to the nature of the bonds between the organic and inorganic components.     

EXAFS, SAXS and Eu3+ Luminescence Spectroscopy of Sol-Gel Derived Siloxane-Polyethyleneoxide Hybrids

Hybrid Eu³⁺-doped silica-poliethyleneoxide (PEO) nanocomposites with covalent bonds between the inorganic (siloxane) and organic (PEO) phases have been obtained by sol-gel process. These materials are transparent, flexible and present high Eu³⁺ luminescence output. Their luminescence properties, local environment around europium ions and structure have been investigated as a function of europium content. EXAFS measurements indicate that the increase in Eu-doping induces a decrease in Eu³⁺ coordination number. An increase in symmetry degree around the metal ion is also observed for increasing Eu³⁺ concentration, while non radiative decay paths from the ⁵D₀ excited state become more important. SAXS results suggest the preferential interaction of europium ions with ether-type oxygens of the polymer chains. However, the existence of interactions between the cations and the carbonyl groups from urea bridges located at the siloxane-PEO interface can not be excluded.     

Study of Hybrid Silica-Polyethyleneglycol Xerogels by Eu3+ Luminescence Spectroscopy

Good optical quality Eu3+-doped silica-polyethyleneglycol hybrids were prepared by the sol-gel process. Thermomechanical analysis showed an increase of the glass transition temperature, due to the stiffness of the polymeric network, as the amount of Eu3+ increased. Europium luminescent properties were used to study structural evolution during the sol-gel transition. For lower doping concentrations dried gels present statistical distributions of Eu3+, typical of an amorphous environment, while for higher concentrations a crystalline-like environment of Eu3+ was observed. A broad emission band was observed in the visible part of the electromagnetic spectrum and assigned to the intrinsic emission from the hybrid polymeric network.