The synthesis of iron–nickel alloy nanoparticles using a reverse micelle technique

Nanosized Fe_0.2Ni_0.8 particles were prepared by reducing their salts with sodium borohydride (NaBH₄) in cationic water-in-oil (w/o) microemulsions of water/cetyl-trimethyl-amonium bromide (CTAB) and n-butanol/isooctane at 25 °C. According to the TEM and X-ray diffraction analyses, the synthesized particles were around 4–12 nm in size. Due to their nanodimensions, the particles had a primitive cubic (pc) structure rather than the body-centered cubic (BCC) structure of the bulk material. An examination of the synthesis from the reverse micelle reveals that the morphology of the iron–nickel alloy nanoparticles depends mainly on the microemulsion's composition. The magnetization of the nanoparticles was much lower than that of the bulk material, reflecting the influence of the nanodimensions on the particles’ magnetizations.     

The LPCTrap experiment: measurement of the β–ν angular correlation in 6He using a transparent Paul trap

We report on the status of the LPCTrap experiment, devoted to measure the β–ν angular correlation in the pure Gamow–Teller decay of ⁶He. This measurement is motivated by the search for the presence of tensor type contributions to the weak interaction. The ⁶He ions are confined in a novel transparent Paul trap. The β particles and the recoil ions are detected in coincidence to deduce the angular correlation parameter. The commissioning run performed in 2005 has given the proof of principle of this experiment. Up to 10⁵ coincidences were recorded during a second run in 2006.     

聚异丁烯高活性端基含量及相对分子质量测定方法的研究

综合使用核磁，VPO和近红外光谱分析技术对聚异丁烯活性端基含量以及相对分子质量的测定进行了详细研究，分别建立核测定聚异丁烯活性端基含量以及其他烯键含量和近红外光谱快速测量聚异聚丁烯活性端基含量。其他烯键含量和相对分子质量的分析方法。成对t检验结果表明，近红外光谱分析方法测定结果与核磁和VPO方法测定结果之间无显著性差异。     

Calculation of heat transfer and uniformity of chemical amplification during post-exposure bake

Heat transfer in a resist-coated silicon wafer using a bake process is theoretically evaluated by modeling the three-dimensional diffusion process, focusing on the controllability of the lithographic performance of chemically amplified resists. Six models of various ambient conditions are used. The proximity gap between the hotplate and the wafer is found to have a dominant influence on the heat transfer process for the whole system. Because the atmosphere near the wafer acts as a thermal diffusion buffer layer, no temperature gradient occurs in the resist, even when it is subjected to convective heat transfer from the resist surface. Experimental results obtained by X-ray lithography confirm the calculation results.     

Cu-MgF2复合纳米金属陶瓷薄膜的电导特性研究

用射频磁控共溅射法制备了Cu体积分数分别为 10 % ,15 % ,2 0 %和 3 0 %的Cu MgF2 复合金属陶瓷薄膜 .用x射线衍射、x射线光电子能谱和变温四引线技术对薄膜的微结构、组分及电导特性进行了测试分析 .微结构分析表明 :制备的Cu MgF2 复合薄膜由fcc Cu晶态纳米微粒镶嵌于主要为非晶态的MgF2 陶瓷基体中构成 ,Cu晶粒的平均晶粒尺寸随组分增加从 11 9nm增至 17 8nm .5 0— 3 0 0K温度范围内的电导测试结果表明 :当Cu体积分数qM 由 15 %增加到 2 0 %时 ,Cu MgF2 复合薄膜的电阻减小了 8个量级 ,得出制备的复合薄膜渗透阈qCM 应处于 15 %和 2 0 %之间 .qM 在 10 %和 15 %之间的薄膜呈介质导电状态 ,而在 2 0 %和 3 0 %之间的薄膜则呈金属导电状态 .从理论上讨论了复合薄膜中杂质电导和本征电导的激活能及其对电导的贡献 ,并讨论了Cu MgF2 复合纳米金属陶瓷薄膜的渗透阈 ,得到了和实验一致的结果     

Synthesis and characterization of norbornene–ethylene–styrene terpolymers with a substituted ansa‐fluorenylamidodimethyltitanium‐based catalyst

This article reports a synthetic method for a norbornene–ethylene–styrene (N‐E‐S) terpolymer, which has not been well investigated so far, via incorporation of styrene (S) into vinyl‐type norbornene–ethylene (N‐E) copolymers catalyzed by a substituted ansa‐fluorenylamidodimethyltitanium [Me₂Si(3,6‐tBu₂Flu)(tBuN)]TiMe₂ catalyst ( I ) activated with a [Ph₃C][B(C₆F₅)₄]/Al(iBu)₃ cocatalyst at room temperature in toluene. The resulting terpolymerization product contained the targeted N‐E‐S terpolymer and the contaminated homopolymers, which were then able to be completely removed by solvent fractionation techniques. While homopolystyrene was easily extracted by fractionation with methylethylketone as a soluble part, homopolyethylene and a trace amount of homopolynorbornene could be perfectly separated by fractionation with chloroform as insoluble parts. The detail characterizations of a chloroform‐soluble polymer with gel permeation chromatography, nuclear magnetic resonance, and differential scanning calorimetry analyses proved that it contained a true N‐E‐S terpolymer with long N‐E sequences incorporated with isolated or short styrene sequences. The homogeneity of the morphology together with a single glass transition temperature that proportionally decreased with the increase of the styrene contents indicated that the N‐E‐S terpolymer obtained in this work is a random polymer with an amorphous structure. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 2765–2773, 2007     

Curran猜想的解答

本文确定了能作为有限群自同构群的Ｐ－群的最佳下最，彻底解决了Ｃｕｒｒａｎ在１９８９年提出的关于此最佳下界的三个猜想。     

Synthesis and Catalytic Asymmetric Reaction of Chiral Pyridine Prolinol Derivatives

The enantioselective reduction of prochiral ketones with borane in the presence of a chiral ligand leading to enantiomerically pure secondary alcohols has received considerable attention in recent years. [1] Enantiomerically pure secondary alcohols are important intermediates for the synthesis of various other organic compounds such as halides, esters, ethers, ketones and amines. To the best of our knowledge, the use of pyridine prolinol derivatives in the reduction of ketones has not been reported so far. Thus, it should be of interest to investigate the catalytic a bility of such ligands. We have an ongoing project in the synthesis and application of chiral pyridine derivatives in chiral molecular recognition[2] and we want to evaluate the effect resulting from the introduction of a pyridinyl moiety onto the catalysts. We expect that the cooperation of pyridine unit and chiral prolinol unit in new ligands may result in unique properties for catalytic reaction.