A facile approach to architecturally defined nanoparticles via intramolecular chain collapse

A novel approach is presented for the controlled intramolecular collapse of linear polymer chains to give well-defined single-molecule nanoparticles whose structure is directly related to the original linear polymer. By employing a combination of living free radical polymerization and benzocyclobutene (BCB) chemistry, nanoparticles can be routinely prepared in multigram quantities with the size being accurately controlled by either the initial degree of polymerization of the linear chain or the level of incorporation of the BCB coupling groups. The latter also allows the cross-link density of the final nanoparticles to be manipulated. In analogy with dendritic macromolecules, a significant reduction of up to 75% in the hydrodynamic volume is observed on going from the starting random coil linear chains to the corresponding nanoparticles. The facile nature of the living free radical process also permits wide variation in monomer selection and functional group incorporation and allows novel macromolecular architectures to be prepared. Furthermore, the use of block copolymers functionalized with benzocyclobutene groups in only one of the blocks gives, after intramolecular collapse, a hybrid architecture in which a single linear polymer chain is attached to the globular nanoparticle.     

Effect of Pr-Ca substitution on the transport and magnetic behavior of LaMnO3 perovskite

The effect of simultaneous substitution of a fluctuating cation and a divalent cation in LaMnO₃ perovskite modifies the properties of the material to exhibit large valence colossal magnetoresistance (CMR) effect. A good example of these properties is (La_1−2x Pr _x Ca _x )MnO₃ (LPCMO) type CMR material. In this communication it is reported that, with the increase in x (for x=0.1, 0.15, 0.2), the T _c varies between 100 and 120 K with improvisation in metal-insulator transition. Interestingly, resistance increases with x from few hundred ohms to few kilo ohms with corresponding decrease in the unit cell volume. The results of the studies using X-ray diffraction (XRD), electrical resistivity, magnetoresistance and ac susceptibility measurements on LPCMO samples for understanding the structural, transport and magnetic properties are discussed in detail.     

TOF-SIMS investigation of degradation pathways occurring in a variety of organic photovoltaic devices - the ISOS-3 inter-laboratory collaboration

The present work is the fourth (and final) contribution to an inter-laboratory collaboration that was planned at the 3rd International Summit on Organic Photovoltaic Stability (ISOS-3). The collaboration involved six laboratories capable of producing seven distinct sets of OPV devices that were degraded under well-defined conditions in accordance with the ISOS-3 protocols. The degradation experiments lasted up to 1830 hours and involved more than 300 cells on more than 100 devices. The devices were analyzed and characterized at different points of their lifetimes by a large number of non-destructive and destructive techniques in order to identify specific degradation mechanisms responsible for the deterioration of the photovoltaic response. Work presented herein involves time-of-flight secondary ion mass spectrometry (TOF-SIMS) in order to study chemical degradation in-plane as well as in-depth in the organic solar cells. Various degradation mechanisms were investigated and correlated with cell performance. For example, photo-oxidation of the active material was quantitatively studied as a function of cell performance. The large variety of cell architectures used (some with and some without encapsulation) enabled valuable comparisons and important conclusions to be drawn on degradation behaviour. This comprehensive investigation of OPV stability has significantly advanced the understanding of degradation behaviour in OPV devices, which is an important step towards large scale application of organic solar cells.     

On the stability of a variety of organic photovoltaic devices by IPCE and in situ IPCE analyses - the ISOS-3 inter-laboratory collaboration

This work is part of the inter-laboratory collaboration to study the stability of seven distinct sets of state-of-the-art organic photovoltaic (OPV) devices prepared by leading research laboratories. All devices have been shipped to and degraded at RIS?-DTU up to 1830 hours in accordance with established ISOS-3 protocols under defined illumination conditions. In this work, we apply the Incident Photon-to-Electron Conversion Efficiency (IPCE) and the in situ IPCE techniques to determine the relation between solar cell performance and solar cell stability. Different ageing conditions were considered: accelerated full sun simulation, low level indoor fluorescent lighting and dark storage. The devices were also monitored under conditions of ambient and inert (N(2)) atmospheres, which allows for the identification of the solar cell materials more susceptible to degradation by ambient air (oxygen and moisture). The different OPVs configurations permitted the study of the intrinsic stability of the devices depending on: two different ITO-replacement alternatives, two different hole extraction layers (PEDOT:PSS and MoO(3)), and two different P3HT-based polymers. The response of un-encapsulated devices to ambient atmosphere offered insight into the importance of moisture in solar cell performance. Our results demonstrate that the IPCE and the in situ IPCE techniques are valuable analytical methods to understand device degradation and solar cell lifetime.     

Isoprene polymerization via reversible addition fragmentation chain transfer polymerization

Until recently, the primary living radical polymerization method available for preparing polyisoprene was nitroxide‐mediated radical polymerization, with reversible addition‐fragmentation chain transfer polymerization being applied only in a few cases within the last couple of years. We report here the preparation of polyisoprene by RAFT in the presence of the trithiocarbonate transfer agent S‐1‐dodecyl‐S′‐(r,r′‐dimethyl‐r′′‐acetic acid)trithiocarbonate and t‐butyl peroxide as the radical initiator. The kinetics of this polymerization at an optimized temperature of 125 °C and radical initiator concentration of 0.2 equiv relative to transfer agent have been studied in triplicate and demonstrate the living nature of the polymerization. These conditions resulted in polymers with narrow polydispersity indices, on the order of 1.2, with monomer conversions up to 30%. Retention of chain‐end functionality was demonstrated by polymerizing styrene as a second block from a polyisoprene macrotransfer agent, resulting in a block copolymer presenting a unimodal gel permeation chromatogram, and narrow molecular weight distribution. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 4100–4108, 2007     

Influence of the structure of nanoscopic building blocks on the assembly of micropatterned surfaces

The effect of solution-state nanoscale structures on the assembly of micropatterns by solvent evaporation was explored with a novel amphiphilic diblock copolymer synthesized by reversible addition–fragmentation chain transfer polymerization. A copolymer of the structure poly(styrene-alt-maleic anhydride)₇₅-b-isoprene₈₄ was assembled into inverse micelles in toluene, and covalently stabilized in the core by reactive amidation of maleic anhydride residues with 2,2′-(ethylenedioxy)bis(ethylamine) to create core-crosslinked nanoparticles (CCNPs) or in the shell by the photoinitiated radical crosslinking reactions of isoprene units to create large crosslinked aggregates (LCAs) of heterogeneous sizes and shapes. Micropatterned films were prepared by the deposition of the diblock copolymer as a solution in acetone and the nanoscale structures (inverse micelle, crosslinked aggregate, and CCNP) as solutions in toluene onto trimethylysilyl chloride treated glass microscope slides under ambient conditions. An analysis by optical microscopy and tapping-mode atomic force microscopy (AFM) indicated that the nanoscale surface topology could be controlled by the pre-establishment of the block copolymer phase segregation into well-defined core–shell nanoassemblies in solution. The most interesting films resulted from the evaporative deposition of inverse micelle and CCNP solutions, which afforded uniform, straplike micropatterns of similar dimensions on the microscale and low surface roughness on the nanoscale (roughness = 4 ± 1 and 6± 1 nm by AFM). © 2006 Wiley Periodicals, Inc. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 5218–5228, 2006     

Cr(VI) Oxidation of Cholesterol—A Kinetic Study Using N-Cetylpicolinium Dichromates,A Class of Novel Phase Transfer Oxidants

Kinetics and Catalysis - Kinetic study of cholesterol oxidation has been studied using a series of N-cetylpicolinium dichromates (CPDC), a class of phase transfer oxidants, in acetic acid medium...     

Elastic properties of the Ta–V system: bcc Ta0.33V0.67 and C15 TaV2

Resonant ultrasound spectroscopy was used to measure the elastic constants of bcc Ta_0.33V_0.67 over the temperature range 3.5–300?K; the results were compared to earlier measurements on C15 TaV₂. The temperature dependence of the polycrystalline shear modulus is completely different in the two phases; that of the bcc phase decreases with temperature whereas that of the C15 phases increases in an anomalous fashion. This difference is consistent with a model involving doubly-degenerate levels at the X point of the Brillouin zone in the C15 phase with the Fermi level lying near the doubly degenerate level. This model accounted for the unusual behaviour of the C15 phase. Debye temperatures were determined from the ultrasonic measurements: 295?K for the C15 phase and 315?K for the bcc phase.     

Irradiation of a cone by a magnetic dipole

Th electromagnetic field produced by a magnetic dipole in thepresence of a perfectly conducting cone of arbitrary cross-sectionis determined. The solution is used to find out how a currenton the cone travelling towards the apex is reflected. Some valuesof the reflection coefficient are calculated. In particular,it is shown that there is a sort of resonance with the reflectionincreasing significantly as the cone approaches a plane.