Rational design of methacrylate monomers containing oxadiazole moieties for single‐layer organic light emitting devices

Methacrylate derived monomers functionalized with pendant oxadiazole moieties were synthesized and copolymerized with carbazole containing monomers to form polymers with electron and hole transporting fragments in the same molecule. Substituents on the oxidazole moiety were varied with the purpose of bandgap tuning and performance optimization when employed in single‐layer organic light emitting devices (OLED). Quantum mechanical calculations of the HOMO‐LUMO levels of the oxidazole derivatives were used to down‐select promising candidates for chemical synthesis and testing in single‐layer OLEDs. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2015 , 53, 1663–1673     

Phenolic compounds,essential oil composition,and antioxidant activity of Angelica purpurascens (Avé-Lall.) Gill

In this study, methanol extracts (MEs) and essential oil (EO) of Angelica purpurascens (Avé-Lall.) Gill obtained from different parts (root, stem, leaf, and seed) were evaluated in terms of antioxidant activity, total phenolics, compositions of phenolic compound, and essential oil with the methods of 2,2-azino-bis(3ethylbenzo-thiazoline-6-sulfonic acid (ABTS•⁺), 2,2-diphenyl-1-picrylhydrazil (DPPH•) radical scavenging activities, and ferric reducing/antioxidant power (FRAP), the Folin–Ciocalteu, liquid chromatography−tandem mass spectrometry (LC−MS/MS), and gas chromatography-mass spectrometry (GC−MS), respectively. The root extract of A. purpurascens exhibited the highest ABTS•⁺, DPPH•, and FRAP activities (IC₅₀: 0.05 ± 0.0001 mg/mL, IC₅₀: 0.06 ± 0.002 mg/mL, 821.04 ± 15.96 µM TEAC (Trolox equivalent antioxidant capacity), respectively). Moreover, EO of A. purpurascens root displayed DPPH• scavenging activity (IC₅₀: 2.95 ± 0.084 mg/mL). The root extract had the highest total phenolic content (438.75 ± 16.39 GAE (gallic acid equivalent), µg/mL)). Twenty compounds were identified by LC−MS/MS. The most abundant phenolics were ferulic acid (244.39 ± 15.64 μg/g extract), benzoic acid (138.18 ± 8.84 μg/g extract), oleuropein (78.04 ± 4.99 μg/g extract), and rutin (31.21 ± 2.00 μg/g extract) in seed, stem, root, and leaf extracts, respectively. According to the GC−MS analysis, the major components were determined as α-bisabolol (22.93%), cubebol (14.39%), α-pinene (11.63%), and α-limonene (9.41%) among 29 compounds. Consequently, the MEs and EO of A. purpurascens can be used as a natural antioxidant source.     

Enhanced ethanol sensing properties of WO3 modified TiO2 nanorods

Pristine and WO₃ decorated TiO₂ nanorods (NRs) were synthesised to investigate n-n-type heterojunction gas sensing properties. TiO₂ NRs were fabricated via hydrothermal method on fluorine-doped tin oxide coated glass (FTO) substrates. Then, tungsten was sputtered on the TiO₂ NRs and thermally oxidised to obtain WO₃ nanoparticles. The heterostructure was characterised by X-ray diffraction (XRD), scanning electron microscopy (SEM), and energy-dispersive X-ray (EDX) spectroscopy. Fabricated sensor devices were exposed to VOCs such as toluene, xylene, acetone and ethanol, and humidity at different operation temperatures. Experimental results demonstrated that the heterostructure has better sensor response toward ethanol at 200 °C. Enhanced sensing properties are attributed to the heterojunction formation by decorating TiO₂ NRs with WO₃.     

Determination of the surface pK of carboxylic- and amine-terminated alkanethiols using surface plasmon resonance spectroscopy

When using self-assembled monolayers (SAMs) with ionizable functional groups, such as COOH and NH2, the dissociation constant (pKd) of the surface is an important property to know, since it defines the charge density of the surface for a given bulk solution pH. In this study, we developed a method using surface plasmon resonance (SPR) spectroscopy for the direct measurement of the pKd of a SAM surface by combining the ability of SPR to detect the change in mass concentration close to a surface and the shift in ion concentration over the surface as a function of surface charge density. This method was then applied to measure the pKd values of both COOH- and NH2-functionalized SAM surfaces using solutions of CsCl and NaBr salts, respectively, which provided pKd values of 7.4 and 6.5, respectively, based on the bulk solution pH. An analytical study was also performed to theoretically predict the shape of the SPR plots by calculating the excess mass of salt ions over a surface as a function of the difference between the solution pH and surface pKd. The analytical relationships show that the state of surface charge also influences the local hydrogen ion concentration, thus resulting in a substantial local shift in pH at the surface compared to the bulk solution as a function of the difference between the bulk solution pH and the pKd of the surface.     

Electrochemical reactivity at redox-molecule-based nanoelectrode ensembles

A model describing electrochemical reactivity at nanoelectrode ensembles consisting of redox-molecule-based active sites immobilized on otherwise passivated electrode surfaces is presented. A mathematical treatment in terms of hemispherical diffusion of redox-active solutes to a layer of independent molecule-based nanoelectrode sites is shown to be equivalent to one in terms of a bimolecular diffusion-limited reaction between a layer of immobilized redox molecules and a reservoir of redox-active solutes. This equivalence derives from the fact that in both cases the mass-transfer problem is essentially that of hemispherical diffusion. The model is further developed to consider rate limitation by both the bimolecular redox reaction between the active-site molecule and redox molecules in solution and the heterogeneous redox reaction between the electrode and the active-site molecule. Analytical expressions are derived for the current–voltage relation corresponding to catalyzed electron transfer at an ensemble of redox-molecule-based nanoelectrode sites, and the expressions are used to interpret preliminary data for ultrasensitive electrochemical detection in flow streams via an electrochemical amplification process that is thought to involve redox mediation by individual analyte molecules adsorbed onto monolayer-coated electrodes.     

Onset of superconductivity in Y-Ba-Cu-O at 100 K

Resistive and magnetic measurements on Y---Ba---Cu---O samples indicate transitions to the superconducting state beginning near 100 K with transition widths typically around 15 K.     

Electrochemical grafting of an aryl fluorosulfonimide electrolyte onto glassy carbon

Robust bonded layers of an aromatic fluorosulfonimide electrolyte were created on glassy carbon disk and plate electrodes by electroreduction of a new fluorosulfonimide aryl diazonium zwitterion. Formation of the bonded layer was confirmed by XPS of the modified surfaces and also by the effect of the bound layer on reduction/oxidation of redox-active probe molecules. Surface coverage in the monolayer range was achieved. Counterions for as-formed layers were initially tetra-alkylammonium ions from the coating electrolyte but could subsequently be exchanged for other cations by exposure to salt solutions. The bonded layers are very stable with respect to treatment with solvents (water and/or acetonitrile), dry heat (120 degrees C), and hot acid (triflic acid, 80 degrees C, neat and containing 50 wt % water); however, they are unstable with respect to electro-oxidative scanning in aqueous electrolyte solutions.     

Transport properties of solid polymer electrolytes prepared from oligomeric fluorosulfonimide lithium salts dissolved in high molecular weight poly(ethylene oxide)

Transport properties such as ionic conductivity, lithium transference number, and apparent salt diffusion coefficient are reported for solid polymer electrolytes (SPEs) prepared using several oligomeric bis[(perfluoroalkyl)sulfonyl]imide (fluorosulfonimide) lithium salts dissolved in high molecular weight poly(ethylene oxide) (PEO). The salt series consists of polyanions in which two discrete fluorosulfonimide anions are linked together by [(perfluorobutylene)disulfonyl]imide linker chains. The restricted diffusion technique was used to measure the apparent salt diffusion coefficients in SPEs, and cationic transference numbers were determined using both potentiostatic polarization and electrochemical impedance spectroscopy methods. A general trend of diminished salt diffusion coefficient with increasing anion size was observed and is opposite to the trend observed in ionic conductivity. This unexpected finding is rationalized in terms of the cumulative effects of charge carrier concentration, anion mobility, ion pairing, host plasticization by the anions, and salt phase segregation on the conductivity.     

Heterogeneous electron-transfer kinetics for ruthenium and ferrocene redox moieties through alkanethiol monolayers on gold

The standard heterogeneous electron-transfer rate constants between substrate gold electrodes and either ferrocene or pentaaminepyridine ruthenium redox couples attached to the electrode surface by various lengths of an alkanethiol bridge as a constituent of a mixed self-assembled monolayer were measured as a function of temperature. The ferrocene was either directly attached to the alkanethiol bridge or attached through an ester (CO(2)) linkage. For long bridge lengths (containing more than 11 methylene groups) the rate constants were measured using either chronoamperometry or cyclic voltammetry; for the shorter bridges, the indirect laser induced temperature jump technique was employed to measure the rate constants. Analysis of the distance (bridge length) dependence of the preexponential factors obtained from an Arrhenius analysis of the rate constant versus temperature data demonstrates a clear limiting behavior at a surprisingly small value of this preexponential factor (much lower than would be expected on the basis of aqueous solvent dynamics). This limit is independent of both the identity of the redox couple and the nature of the linkage of the couple to the bridge, and it is definitely different (smaller) from the limit derived from an equivalent analysis of the rate constant (versus temperature) data for the interfacial electron-transfer reaction through oligophenylenevinylene bridges between gold electrodes and ferrocene. There are a number of possible explanations for this behavior including, for example, the possible effects of bridge conformational flexibility upon the electron-transfer kinetics. Nevertheless, conventional ideas regarding electronic coupling through alkane bridges and solvent dynamics are insufficient to explain the results reported here.