Chromatographic analysis of hydrocarbons in marine sediments and seawater.

The low concentration of hydrocarbons anticipated in pollution baseline studies necessitates the development of analytical techniques sensitive at the sub-microgram per kilogram concentration level. The method of analysis developed in this laboratory involves dynamic headspace sampling for volatile hydrocarbon components of the sample, followed by coupled-column liquid chromatography for the non-volatile components. These techniques require minimal sample handling, reducing the risk of sample component loss and/or sample contamination. Volatile sample components are separated from the matrix in a closed system and concentrated on a TENAX-GC packed pre-column, free from large amounts of solvent and ready for GC/GC-MS analysis. Non-volatile compounds, such as the benzpyrenes, may be extracted from large volumes of water and concentrated on a Bondapak C18 packed pre-column for coupled-column liquid chromatographic separation and analysis. Results of the application of these techniques to the analysis of samples from sites of known low level hydrocarbon contamination are presented and discussed.     

Through-shell alkyllithium additions and borane reductions

The through-shell borane reduction and methyllithium addition to benzaldehyde (1), benzocyclobutenone (2), and benzocyclobutenedione (3) incarcerated inside a hemicarcerand (4) with four tetramethylenedioxy bridges are reported. All guests could be reduced and methylated. Selective monoreduction and monomethylation were observed for 3. In the methyllithium addition to 4[symbol: see text]3, the initially formed lithium alcoholate underwent a Moore rearrangement. The reactivity of the incarcerated guests toward methyllithium increased in the order 1 < 2 < 3 and toward borane in the order 1 < 2 approximately equal 3. Guest reactivity was correlated with the inner-phase location of the reacting carbonyl group in the preferred guest inner-phase orientation. The latter was determined from the X-ray structures of 4[symbol: see text]1, 4[symbol: see text]2, and 4[symbol: see text]3, from molecular mechanical calculations, and from the hemicarcerand-induced upfield shift of the guest proton resonances. In the methyllithium and n-butyllithium addition to 4[symbol: see text]1 and 4[symbol: see text]3 at elevated temperatures, selective cleavage of a host's spanner or tetramethylenedioxy bridge, respectively, was observed. The cleavage of one spanner also took place in the methyllithium addition to the 1-methyl-2-pyrrolidinone hemicarceplex. These scission reactions are initiated by the initially formed lithium alcoholates, which show enhanced basicity and nucleophilicity in the inner phase as compared to the bulk phase. Mechanisms for the host scission reactions are discussed.     

Numerical Investigation of Graphene as a Back Surface Field Layer on the Performance of Cadmium Telluride Solar Cell

This paper numerically explores the possibility of ultrathin layering and high efficiency of graphene as a back surface field (BSF) based on a CdTe solar cell by Personal computer one-dimensional (PC1D) simulation. CdTe solar cells have been characterized and studied by varying the carrier lifetime, doping concentration, thickness, and bandgap of the graphene layer. With simulation results, the highest short-circuit current (I_sc = 2.09 A), power conversion efficiency (η = 15%), and quantum efficiency (QE~85%) were achieved at a carrier lifetime of 1 × 10³ μs and a doping concentration of 1 × 10¹⁷ cm⁻³ of graphene as a BSF layer-based CdTe solar cell. The thickness of the graphene BSF layer (1 μm) was proven the ultrathin, optimal, and obtainable for the fabrication of high-performance CdTe solar cells, confirming the suitability of graphene material as a BSF. This simulation confirmed that a CdTe solar cell with the proposed graphene as the BSF layer might be highly efficient with optimized parameters for fabrication.     

Phenothiazine–BODIPY–Fullerene Triads as Photosynthetic Reaction Center Models: Substitution and Solvent Polarity Effects on Photoinduced Charge Separation and Recombination

Novel photosynthetic reaction center model compounds of the type donor₂–donor₁–acceptor, composed of phenothiazine, BF₂‐chelated dipyrromethene (BODIPY), and fullerene, respectively, have been newly synthesized using multistep synthetic methods. X‐ray structures of three of the phenothiazine‐BODIPY intermediate compounds have been solved to visualize the substitution effect caused by the phenothiazine on the BODIPY macrocycle. Optical absorption and emission, computational, and differential pulse voltammetry studies were systematically performed to establish the molecular integrity of the triads. The N‐substituted phenothiazine was found to be easier to oxidize by 60 mV compared to the C‐substituted analogue. The geometry and electronic structures were obtained by B3LYP/6‐31G(dp) calculations (for H, B, N, and O) and B3LYP/6‐31G(df) calculations (for S) in vacuum, followed by a single‐point calculation in benzonitrile utilizing the polarizable continuum model (PCM). The HOMO?1, HOMO, and LUMO were, respectively, on the BODIPY, phenothiazine and fullerene entities, which agreed well with the site of electron transfer determined from electrochemical studies. The energy‐level diagram deduced from these data helped in elucidating the mechanistic details of the photochemical events. Excitation of BODIPY resulted in ultrafast electron transfer to produce PTZ–BODIPY^.+–C₆₀^.?; subsequent hole shift resulted in PTZ^.+–BODIPY–C₆₀^.? charge‐separated species. The return of the charge‐separated species was found to be solvent dependent. In nonpolar solvents the PTZ^.+–BODIPY–C₆₀^.? species populated the ³C₆₀* prior to returning to the ground state, while in polar solvent no such process was observed due to relative positioning of the energy levels. The ¹BODIPY* generated radical ion‐pair in these triads persisted for few nanoseconds due to electron transfer/hole‐shift mechanism.     

Nickel‐Catalyzed α‐Carbonylalkylarylation of Vinylarenes: Expedient Access to γ,γ‐Diarylcarbonyl and Aryltetralone Derivatives

We report a Ni‐catalyzed regioselective α‐carbonylalkylarylation of vinylarenes with α‐halocarbonyl compounds and arylzinc reagents. The reaction works with primary, secondary, and tertiary α‐halocarbonyl molecules, and electronically varied arylzinc reagents. The reaction generates γ,γ‐diarylcarbonyl derivatives with α‐secondary, tertiary, and quaternary carbon centers. The products can be readily converted to aryltetralones, including a precursor to Zoloft, an antidepressant drug.     

Dynamic hemicarcerands and hemicarceplexes

The reversible nature of the imine bond formation in CDCl(3) solution has been exploited to exchange substituted for unsubstituted m-phenylenediamine (MPD) units in hemicarcerand octaimines. Moreover, acid-catalyzed imine exchange has been shown to provide a novel mechanism whereby ferrocene (Fc) can be released as an entrapped guest from the hemicarceplex C(2)B(4)&crcldt;Fc dissolved in CDCl(3) to give the hemicarcerand C(2)B(4) when excess of both MPD and trifluoroacetic acid are present.     

Synthesis of emission line profiles from free-burning arcs

Theoretical emission line profiles have been evaluated by solving the radiative transfer equation and using physical parameters predicted by applying a two-dimensional model of a free-burning arc in argon at atmospheric pressure. Quantities describing the Stark shift and broadening of an ArI Line (λ763.5 nm) have been obtained by adjusting the theoretical profile to agree with a measured profile. A prominent absorption feature observed at the line center in the experimental profile is ascribed to absorption in a relatively cool layer surrounding the luminous arc column. There is strong evidence that this layer is not in LTE.     

Ein Mittelwertsatz in der Primzahltheorie

Ohne Zusammenfassung     

Studien über die Nullstellen der Riemannschen Zetafunktion

Ohne Zusammenfassung