Establishment of traceability of ammonium nitrogen determination in wastewater

A case study is presented for the establishment of traceability for ammonium nitrogen determination in wastewater in a routine laboratory in order to fulfil the requirements of ISO/IEC standard 17025. The necessary relevant information was obtained from the method validation data, the quality control data and equipment calibration certificates. The method of measurement is described together with the measurement equation, selected traceable reference standards and the associated measurement uncertainty. The major sources of uncertainty of the result of measurement were identified and the combined uncertainty was calculated. Identification of the main uncertainty sources represents the basis for target operations for reducing the measurement uncertainty of this determination.     

Uncertainty of chemical oxygen demand determination in wastewater samples

 The measurement uncertainty of the result of chemical oxygen demand determination in wastewater was evaluated. The major sources of uncertainty of the result of measurement were identified as the purity of reagents, volumetric operations, gravimetric operations, bias, and the repeatability of the method. Identification and evaluation of uncertainty sources was followed by combined uncertainty calculations. The combined uncertainty was compared to the experimentally determined variation and good agreement was found, indicating that the major uncertainty sources had been identified. The results show that the major sources of uncertainty arose from repeatability at high concentration level and volumetric steps at low concentration level, thus revealing the target operations for reducing the measurement uncertainty of this determination. Received: 5 August 2002 Accepted: 5 November 2002 Acknowledgements This research was supported by the Ministry of Education, Science and Sport of the Republic of Slovenia (Project Z2–3530). Presented at CERMM-3, Central European Reference Materials and Measurements Conference: The function of reference materials in the measurement process, May 30–June 1, 2002, Rogaška Slatina, Slovenia Correspondence to A. Drolc     

Kinetics of free-radical polymerization of p-vinylbenzyl methyl ether: Crosslinking by initiator free radicals

Kinetics of polymerization of p-vinylbenzyl methyl ether at low conversion either in bulk or in benzene have been found to be quite similar to those of the unsubstituted monomer styrene. Rates of polymerization initiated by peroxides or α,α′-azobisisobutyronitrile over the temperature range 50–70°C. have been found to be proportional to [Monomer][Initiator]^1/2 with an activation energy difference E_propagation – 1/2 E_termination ≈ 6 kcal./mole. Azo initiation leads to essentially unbranched poly(vinyl-benzyl methyl ether) even at very high conversions, whereas initiation of undiluted monomer by diacyl peroxides results in some crosslinking at high conversion. Use of biacetyl as a photoinitiator of polymerization over the temperature range 0–60°C. with either bulk monomer or monomer solutions in benzene has been found in each instance to yield crosslinked, insoluble polymers at low degrees of conversion. Benzene solutions of soluble polymer have been converted to high molecular weight branched polymers by free radicals generated by photolysis of biacetyl, and a substantial preference of methyl free radicals to abstract benzyl hydrogens of poly(p-vinylbenzyl methyl ether) rather than add to solvent benzene has been observed.     

Patterned cell culture inside microfluidic devices

This paper describes a simple plasma-based dry etching method that enables patterned cell culture inside microfluidic devices by allowing patterning, fluidic bonding and sterilization steps to be carried out in a single step. This plasma-based dry etching method was used to pattern cell-adhesive and non-adhesive areas on the glass and polystyrene substrates. The patterned substrate was used for selective attachment and growth of human umbilical vein endothelial cells, MDA-MB-231 human breast cancer cells, NIH 3T3 mouse fibroblasts, and primary rat cortical neurons. Finally, we have successfully combined the dry-patterned substrate with a microfluidic device. Patterned primary rat neurons were maintained for up to 6 days inside the microfluidic devices and the neurons' somas and processes were confined to the cell-adhesive region. The method developed in this work offers a convenient way of micropatterning biomaterials for selective attachment of cells on the substrates, and enables culturing of patterned cells inside microfluidic devices for a number of biological research applications where cells need to be exposed to well-controlled fluidic microenvironment.     

Ionic polymerization of p-vinylbenzyl methyl ether

Ionic polymerizations of vinylbenzyl methyl ether initiated by either carbanions or Lewis acids has been found to lead to crosslinked polymers. By comparative studies of strong carbanionic bases and Lewis acids with benzyl ethers, it has been possible to define details of mechanisms which in conjunction with cationic or anionic propagation lead to crosslinks. The α-hydrogens of benzyl ethers have been found to be sufficiently acidic to terminate anionic polymerization of styrene and displacement of alkoxide anion from the benzyl ether linkage by nucelophilic polymer anions is proposed as a mechanism leading to branching and eventual crosslinking in anionic polymerization of vinylbenzyl methyl ether. Cationic polymerization of vinylbenzyl methyl ether is quite complex. In addition to propagation, chain transfer, and spontaneous termination of cation chain carriers, there is evidence for complex formation between Lewis acid initiator and the benzyl ether substituent. A slow decomposition of ether–Lewis acid complexes produces benzylcarbonium ions which alkylate aromatic rings of polymer and thereby crosslink the polymer. Benzyl ether has been found to be an effective chain terminator for cationic styrene polymerization.     

Escaping from Flatland: Stereoconvergent Synthesis of Three-Dimensional Scaffolds via Ruthenium(II)-Catalyzed Noyori–Ikariya Transfer Hydrogenation

Noyori–Ikariya-type ruthenium(II)-catalysts for asymmetric transfer hydrogenation (ATH) have been known for 25 years and have proved as a well-behaved and user-friendly platform for the synthesis of chiral secondary alcohols. A progress has been made in the past five years in understanding the asymmetric reduction of complex ketones, where up to four stereocenters can be controlled in a single chemical transformation. Intriguing multi-chiral molecular architectures are therefore available in few well understood and robust synthetic steps from commercially available building blocks and possess handles for additional functionalization. The aim of this Review is to showcase the availability of three-dimensional scaffolds and homochiral lead-like compounds via ATH and inspire their direct use in drug discovery endeavors. Basic mechanistic insights are provided to demystify the stereo-chemical outcomes, as well as examples of diastereoselective transformations of enantiopure alcohols to give a feeling of how these rigid non-planar molecules can be further elaborated.