Amperometric monitoring of lactate accumulation in rabbit ischemic myocardium

Fabrication and characterization of miniature, flexible, planar biosensors for monitoring l-lactate accumulation in an ischemic myocardium are described. Three configurations of Au-based electrodes were fabricated by a photolithographic technique on flexible polyimide Kapton((R)) foil. All sensors are based on an immobilized lactate oxidase with amperometric detection of the enzymatically produced hydrogen peroxide at a platinum-electroplated-gold base electrode polarized at 0.5 V versus Ag/AgCl. An inner electropolymeric layer is used to prevent electrode fouling and to reject the interference effects of easily oxidizable molecules. In addition, a diffusion controlling outer layer that greatly enhances the linear dynamic range of the sensor, is obtained by casting a polyurethane external film. The developed sensor was evaluated in vitro and proved to have high selectivity, good operational stability, good accuracy and precision (average recovery = 102.3 +/- 0.4% for control sera), fast response time (t(95) = 20 s) and high upper limit of the linear dynamic range (25-80 mM, with sensitivity of 1.7-0.4 nA mM(-1) respectively at PO(2) = 15 mmHg). Subsequently, the sensor was brought into direct contact with the surface of the rabbit papillary muscle and used for continuous quantitative monitoring of extracellular lactate accumulation during no-flow ischemia.     

In vivo and in vitro testing of microelectronically fabricated planar sensors designed for applications in cardiology

Summary Ion-sensitive, planar micro-electrode arrays were fabricated by photolithographic microelectronics technology on a flexible polyimide substrate. The steps of the microelectronics processing are summarized. The electrodes were tested in blood serum, whole blood and in the hamstring muscle of anesthetized rabbits. The performance characteristics of planar pH-sensors are compared with commercial glass electrodes. The close correlation of the data are encouraging for further acute and later chronic applications.Dedicated to Professor Dr. Wilhelm Fresenius     

Control of oenological products: discrimination between different botanical sources of L-tartaric acid by isotope ratio mass spectrometry

Following previous studies on counterfeit of wines with synthetic ingredients, the possibility of frauds by natural external L-tartaric acid has also been investigated. The aim of this research was to map the stable isotope ratios of L-tartaric acid coming from botanical species containing large amounts of this compound: grape and tamarind. Samples of L-tartaric acid were extracted from the pulp of tamarind fruits originating from several countries and from grape must. delta(13)C and delta(18)O were measured for all samples. Additional delta(2)H measurements were performed as a complementary analysis to help discrimination of the botanical origin. Different isotopic patterns were observed for the different botanical origins. The multivariate statistical analysis of the data shows clear discrimination among the different botanical and synthetic sources. This approach could be a complementary tool for the control of L-tartaric acid used in oenology.     

Planar micro sensors for in vivo myocardial pH measurements

Potentiometric responses of microelectronically fabricated planar pH sensors based on both TDDA or ETH 5294 proton neutral carriers, in aminated PVC matrix, were evaluated with respect to main analytical parameters (linear ranges, slopes, reproducibility of potential measurements, potential drift and membrane resistance). In order to increase the electrode life time, increased amounts of membrane material were applied on the Ag/AgCl-poly-HEMA active spots of the polyimide substrate. The electrodes were implanted into an in situ porcine beating heart preparation at a midmyocardial depth in order to monitor H(+) concentration changes during the course of coronary artery occlusion.     

Aliphatic polyurethane as a matrix for pH sensors: effects of native sites and added proton carrier on electrical and potentiometric properties

The potentiometric and impedance characteristics of polymeric membranes, based on aliphatic polyurethane (Tecoflex) as a matrix, are described and interpreted by theory and experiments for H(+) and alkali metal ion-sensitive sensors. Both dummy plasticized membranes and proton carrier-loaded membranes can show pH response. The pH response of dummy membranes is due to protonated natural negative sites in the polyurethane matrix. The electrodes with added proton carrier show improved rejection of Li(+), Na(+), and K(+) responses and give useful analytical responses. Optimal performance requires control of negative site concentration by addition of lipophilic salt (e.g. tetraphenylborate derivatives). Impedance analyses show surface-rate semicircles and, depending on the bathing electrolyte solution, appearance of a diffusional Warburg impedance. In addition to these time-dependence surface region effects, changes in the bulk membrane resistance with soaking time can be well correlated with equilibrium water content of plasticized membranes.     

Amperometric measuring cell for the determination of putrescine oxidase activity

A microfabricated, flat form, amperometric microcell (microchip) is used in a simple, two-electrode arrangement for putrescine oxidase enzyme activity determinations. The cell contains a platinum microdisk working electrode and an Ag/AgCl reference electrode covered by a porous, hydrophilic membrane. An electrochemically-prepared size-exclusion layer is applied on the working electrode surface, to avoid the effect of electroactive interferences in the sample. The hydrophilic membrane, resting on the bottom of the cell, is soaked with a small volume of buffered substrate solution and a few mul enzyme containing sample solution is dispensed over the electrodes. During the enzyme activity measurement a catalytic reaction takes place in the membrane-supported liquid film over the working electrode surface. The hydrogen peroxide produced in the reaction is detected amperometrically. The amperometric current-time curves are used for evaluation. In our work putrescine was used as a substrate to determine the unknown putrescine oxidase enzyme activity of the sample. Elevated diamine oxidase enzyme activity in the vaginal milieu can indicate premature rupture of the amniotic membrane. Results with membrane discs, containing all the necessary chemicals in solid or lyophilized form, are very encouraging with respect of a single use, 'reagentless' biosensor for home care.     

Development of a diamine biosensor

An amperometric diamine sensor is developed for clinical applications in diagnosis of bacterial vaginosis (BV). The sensor is based on crosslinked putrescine oxidase (PUO) which catalyzes the conversion of diamines (mainly putrescine and cadaverine) to products including hydrogen peroxide. The hydrogen peroxide is detected anodically at platinum electrode polarized at 0.5 V versus Ag/AgCl. Platinum-plated gold electrodes used as a substrate for the sensor construction, are batch-fabricated on a flexible polyimide foil (Kapton(R), DuPont). A three-electrode cell configuration is used in all amperometric measurements. The sensor construction is based on three layers: an inner layer to reject the interference effect of oxidizable molecules, an outer diffusion controlling layer, and in addition, an enzyme middle layer. The enzyme layer was immobilized by crosslinking PUO with bovine serum albumin (BSA) using glutaraldehyde (GA). An optimization study of the enzyme solution composition was carried out. With the optimized enzyme layer, the biosensor showed a very high sensitivity and fast response time of ca. 20 s. The sensor has a linear dynamic range from (0.5-300 muM) for putrescine that covers the expected biological levels of the analyte. Details on sensor fabrication and characterization are given in the present work.     

Responses of H(+) selective solvent polymeric membrane electrodes fabricated from modified PVC membranes

Potentiometric responses of a novel class of pH sensitive ionophores, namely several phenoxazine derivatives, were tested in different modified PVC matrices. The ionophores were compounded into liquid membranes as usual or were covalently coupled to the polymeric matrix. The general analytical performance of the membranes and other membrane characteristics (i.e., resistance and response time, as measures of membrane decomposition or structural changes) were followed in time. The transient responses of membranes with mobile ionophores in high molecular weight (HMW) and carboxylated PVC (PVC-COOH) were compared to those with immobilized ionophores. The response time of membranes with immobilized ionophores was found to be between those with mobile ionophores in HMW (fast response) and PVC-COOH (sluggish response). Accordingly, the rate of response was correlated primarily to the -COOH content of the membranes.