Simultaneous determination of Cd(II), Cu(II) and Pb(II) in surface waters by solid phase extraction and flow injection analysis with spectrophotometric detection

A method for heavy metal monitoring using spectrophotometric detection is presented. Traces of Cu(II), Pb(II) and Cd(II) at the low microg l(-1) level can be determined simultaneously after both selective removal of metal interferences and preconcentration using 'extraction chromatographic resins'. Lewatit TP807'84, which contains di(2,4,4-trimethylpentyl)phosphinic acid as active component, was used as solid adsorbent. Two minicolumns containing this resin were used: one at pH 3.2 for the removal of interferences, such as Zn(II) and Fe(III), and the other at pH 5.5 for the selective preconcentration of the target analytes. Spectrophotometric determination used FIA methodology with sulfarsazene as chromogenic reagent and partial least-squares multivariate calibration. The method was successfully applied to the analysis of surface waters from the Llobregat river and ground water samples from wells in the Guadiamar basin. Accuracy, expressed in terms of recoveries, was in the range 80-120% and relative standard deviations were below 10%.     

Sequential injection system with higher dimensional electrochemical sensor signals Part 2. Potentiometric e-tongue for the determination of alkaline ions

An intelligent, automatic system based on an array of non-specific-response chemical sensors was developed. As a great amount of information is required for its correct modelling, we propose a system generating it itself. The sequential injection analysis (SIA) technique was chosen as it enables the processes of training, calibration, validation and operation to be automated simply. Detection was carried out using an array of potentiometric sensors based on PVC membranes of different selectivity. The diluted standard solutions needed for system learning and response modelling are automatically prepared from more concentrated standards. The electrodes used were characterised with respect to one and two analytes, by means of high-dimensionality calibrations, and the response surface of each was represented; this characterisation enabled an interference study of great practical utility. The combined response was modelled by means of artificial neural networks (ANNs), and thus it was possible to obtain an automated electronic tongue based on SIA. In order to identify the ANN which provided the best model of the electrode responses, some of the network's parameters were optimised and its usefulness in determining NH₄⁺, K⁺ and Na⁺ ions in synthetic samples was then tested. Finally, it was used to determine these ions in commercial fertilisers, the obtained results being compared with reference methods.     

An efficient and scalable block parallel algorithm of Neville elimination as a tool for the CMB maps problem

This paper analyses the performance of several versions of a block parallel algorithm in order to apply Neville elimination in a distributed memory parallel computer. Neville elimination is a procedure to transform a square matrix A into an upper triangular one. This analysis must take into account the algorithm behaviour as far as execution time, efficiency and scalability are concerned. Special attention has been paid to the study of the scalability of the algorithms trying to establish the relationship existing between the size of the block and the performance obtained in this metric. It is important to emphasize the high efficiency achieved in the studied cases and that the experimental results confirm the theoretical approximation. Therefore, we have obtained a high predicting ability tool of analysis. Finally, we will present the elimination of Neville as an efficient tool in detecting point sources in cosmic microwave background maps.     

Electrochemical Characterization of Egyptian Blue Pigment in Wall Paintings Using the Voltammetry of Microparticles Methodology

The solid state voltammetric response of Egypt blue, Han blue and ploss blue pigments upon attachment to graphite electrodes in contact with aqueous phosphate buffer at pH 7.0 is studied by voltammetry of microparticles and scanning electrochemical microscopy. Such voltammetric responses, combined with those for synthetic specimens consisting of binary mixtures of the pigment and SiO₂ or CaCO₃ as well as ternary ones of CaCO₃ and SiO₂ mixtures allow for the identification of the pigment and the support in samples from wall paintings using different electrochemical parameters, in particular upon performing the Tafel and modified Tafel analysis of voltammetric peaks. Identification of Egypt blue in microsamples of murals from a Roman archaeological site in Castulo (Jaén, Spain) is discussed.     

Non-linear parallel solver for detecting point sources in CMB maps using Bayesian techniques

In this work we present a suitable computational tool to deal with large matrices and solve systems of non-linear equations. This technique is applied to a very interesting problem: the detection and flux estimation of point sources in Cosmic Microwave Background (CMB) maps, which allows a good determination of CMB primordial fluctuations and leads to a better knowledge of the chemistry at the early stages of the Universe. The method uses previous information about the statistical properties of the sources, so that this knowledge is incorporated in a Bayesian scheme. Simulations show that our approach allows the detection of more sources than previous non-Bayesian techniques, with a small computation time.     

First observation of 54Zn and its decay by two-proton emission

The nucleus 54Zn has been observed for the first time in an experiment at the SISSI/LISE3 facility of GANIL in the quasifragmentation of a 58Ni beam at 74.5 MeV/nucleon in a (nat)Ni target. The fragments were analyzed by means of the ALPHA-LISE3 separator and implanted in a silicon-strip detector where correlations in space and time between implantation and subsequent decay events allowed us to generate almost background free decay spectra for about 25 different nuclei at the same time. Eight 54Zn implantation events were observed. From the correlated decay events, the half-life of 54Zn is determined to be 3.2(+1.8)(-0.8) ms. Seven of the eight implantations are followed by two-proton emission with a decay energy of 1.48(2) MeV. The decay energy and the partial half-life are compared to model predictions and allow for a test of these two-proton decay models.     

Production of heavy neutron-rich nuclei “south" of lead

The production of heavy neutron-rich nuclei is investigated using cold-fragmentation reactions. More than 25 new heavy neutron-rich nuclei were produced in the fragmentation of ²⁰⁸Pb projectiles at 1 A GeV impinging a beryllium target. The precise measurement of their production cross sections enables to benchmark the predictive power of different model calculations and make reliable predictions of the production rates expected in future radioactive beam facilities.     

Development of a Xanthine Oxidase Modified Amperometric Electrode for the Determination of the Antioxidant Capacity

This paper describes the development of a xanthine oxidase/poly‐m‐phenylenediamine (XOD‐PPD)‐modified electrode. The biosensor was constructed by encapsulating XOD in a sol‐gel matrix deposited onto a platinum based screen‐printed electrode functionalized with a permselective PPD membrane. The hydrogen peroxide generated as a final product of the enzymatic reaction between the hypoxanthine and the XOD or by the spontaneous dismutation of superoxide radicals was selectively monitored at +700 mV. The use of a highly selective PPD layer blocked the nonspecific oxidation of other oxidizable molecules. Finally the biosensor was applied to the determination of the antioxidant capacity of acetylsalicylic acid.     

A zebrafish scale assay to monitor dioxin-like activity in surface water samples

New regulations on water quality require a close control of the possible biological activities known or unexpected pollutants may bring about. We present here a protocol based on the direct exposure of zebrafish to river water and the analysis of expression of specific genes in their scales to determine the presence of compounds with dioxin-like biological activity. The method does not require the killing of animals and allows detection of the biological activity after a single day of exposure. When tested, the method with real samples from the Llobregat River, clear temporal and spatial variations were observed, demonstrating its suitability for monitoring natural variations in water quality linked to specific discharges. High biological activities were unrelated to the currently checked water quality parameters (macropollutants, turbidity, TOC, etc.), but they did correlate with the presence of micropollutants (estrogens, detergents, etc.) related to domestic and/or industrial runoffs. The scale assay therefore provides a new tool to evaluate water quality changes that cannot be easily derived from the existing standard analytical procedures. It ranks among the very few described protocols able to detect biological effects from natural water samples, without a pre-concentration step, and after only 24 h of exposure.     

On the representation of a class of contractive matrix-valued functions

By a decomposition of L₊²(Cⁿ) in two orthogonal subspaces we obtain a representation of a matrix-valued function of the class $\text{J}$Π, defined by Arov (Darlington realization of matrix-valued functions, Izv. Akad. Nauk. SSSR, Ser. Mat. Tom.37 (1973), No. 6); (Math. USSR Izvestija7 (1973), No. 6, 1295–1326). Real matrix-valued functions of this class play an important role in methods of synthesis of scattering matrices of linear passive n-ports.