Portable single-sided NMR measurements at variable temperatures: Implementation of a thermo-controlled device and application to the heating of bread dough

A temperature control unit was implemented to vary the temperature of samples studied on a commercial Mobile Universal Surface Explorer nuclear magnetic resonance (MOUSE-NMR) apparatus. The device was miniaturized to fit the maximum MOUSE sampling depth (25 mm). It was constituted by a sample holder sandwiched between two heat exchangers placed below and above the sample. Air was chosen as the fluid to control the temperature at the bottom of the sample, at the interface between the NMR probe and the sample holder, in order to gain space. The upper surface of the sample was regulated by the circulation of water inside a second heat exchanger placed above the sample holder. The feasibility of using such a device was demonstrated first on pure water and then on several samples of bread dough with different water contents. For this, T1 relaxation times were measured at various temperatures and depths and were then compared with those acquired with a conventional compact closed-magnet spectrometer. Discussion of results was based on biochemical transformations in bread dough (starch gelatinization and gluten heat denaturation). It was demonstrated that, within a certain water level range, and because of the low magnetic field strength of the MOUSE, a linear relationship could be established between T1 relaxation times and the local temperature in the dough sample.     

Enhancing signal-to-noise ratio and resolution in low-field NMR relaxation measurements using post-acquisition digital filters

The traditional way to enhance signal-to-noise ratio (SNR) of nuclear magnetic resonance (NMR) signals is to increase the number of scans. However, this procedure increases the measuring time that can be prohibitive for some applications. Therefore, we have tested the use of several post-acquisition digital filters to enhance SNR up to one order of magnitude in time domain NMR (TD-NMR) relaxation measurements. The procedures were studied using continuous wave free precession (CWFP-T₁) signals, acquired with very low flip angles that contain six times more noise than the Carr–Purcell–Meiboom–Gill (CPMG) signal of the same sample and experimental time. Linear (LI) and logarithmic (LO) data compression, low-pass infinity impulse response (LP), Savitzky–Golay (SG), and wavelet transform (WA) post-acquisition filters enhanced the SNR of the CWFP-T₁ signals by at least six times. The best filters were LO, SG, and WA that have high enhancement in SNR without significant distortions in the ILT relaxation distribution data. Therefore, it was demonstrated that these post-acquisition digital filters could be a useful way to denoise CWFP-T₁, as well as CPMG noisy signals, and consequently reducing the experimental time. It was also demonstrated that filtered CWFP-T₁ method has the potential to be a rapid and nondestructive method to measure fat content in beef and certainly in other meat samples.     

The analysis of volatile trace compounds in landfill gases,compost heaps and forest air

Landfill gas, cryotrapped on a loop fashioned from a length of a capillary gas chromatography (GC) column, was examined for volatile organometallic compounds (VOMCs) and for volatile organic compounds (VOCs) by using GC–mass spectrometry (MS). A large number of organic components were present and many were identified, but the only VOMCs present in high enough concentrations to be detected were trimethylstibine and tetramethyltin. The use of inductively coupled plasma (ICP)‐MS as an element‐specific detector allowed the identification of a number of other organometallic species in the landfill gas, including trimethylarsine and trimethylbismuth, and, for the first time, butyltrimethyltin and dibutyldimethyltin. The presence of molybdenum hexacarbonyl was confirmed. Gas from a large‐scale compost heap and from compost incubated in the laboratory contained iodomethane but no common VOMCs (GC–ICP‐MS). Only VOCs were present in forest air (GC–MS). Copyright © 2003 John Wiley & Sons, Ltd.     

Controlled structure and density of “living” polystyrene brushes on flat silica surfaces

Thin layers of polystyrene were grown from surface-grafted nitroxide initiators via controlled “living” free radical polymerization. The “reactive” Langmuir-Blodgett deposition method allowed an effective control of the initiator layer density leading to PS brushes with different and high grafting density and stretching. The influence of the grafting density on the layer structure was studied. Comparison with theoretical predictions for monodispersed brushes in bad solvent was discussed. The thickness was found to vary linearly with molecular weight and the density dependence was shown using wetting measurements. Special features of controlled radical nitroxide polymerization from a surface were discussed. A direct comparison of the molecular weight and polydispersity between surface and bulk polymers was made by de-grafting the brushes into a toluene/HF solution. Finally, some evidence of a “surface Fischer” effect was shown from re-initiated layers. Received 20 December 2001     

Particle production from signature change

We consider the (massless) scalar field on 2-dimensional manifolds whose metric changes signature and which admit a spacelike isometry. Choosing the wave equation so that there will be a conserved Klein-Gordon product implicitly determines the junction conditions one needs to impose in order to obtain global solutions. The resulting mix of positive and negative frequencies produced by the presence of Euclidean regions depends only on the total width of the regions, and not on the detailed form of the metric.This essay received honorable mention in the 1991 competition of the Gravity Research Foundation.     

First measurement of the ϱ spectral function in nuclear collisions

The NA60 experiment at the CERN SPS has studied low-mass muon pairs in 158 A GeV In–In collisions. A strong excess of pairs is observed above the yield expected from neutral meson decays. The unprecedented sample size close to 400000 events and the good mass resolution of about 2% made it possible to isolate the excess by subtraction of the decay sources. The shape of the resulting mass spectrum shows some non-trivial centrality dependence, but is largely consistent with a dominant contribution from π⁺π^-→ϱ→μ⁺μ^- annihilation. The associated ϱ spectral function exhibits considerable broadening, but essentially no shift in mass. The p_T-differential mass spectra show the excess to be much stronger at low p_T than at high p_T. The results are compared to theoretical model predictions; they tend to rule out models linking hadron masses directly to the chiral condensate. PACS 25.75.-q; 12.38.Mh; 13.85.Qk     

Diels-Alder chemistry on alkene functionalized films

A substrate-independent method has been devised for ring formation at solid surfaces. This entails the aminolysis reaction of allylamine with maleic anhydride pulsed plasma polymer films to yield terminal alkene groups at the surface. Subsequent exposure to 1,3-cyclohexadiene leads to a Diels-Alder type (4 + 2) cycloaddition reaction to give a mixture of endo- and exo-bicyclo[2.2.2]oct-2-ene rings.     

Macrocyclization on the fullerene core: Direct regio- and diastereoselective multi-functionalization of [60]fullerene,and synthesis of fullerene-dendrimer derivatives

The macrocyclization between buckminsterfullerene, C₆₀, and bis-malonate derivatives in double Bingel reaction provides a versatile and simple method for the preparation of covalent bis-adducts of C₆₀ with high regio- and diastereoselectivity. A combination of spectral analysis, stereochemical considerations, and X-ray crystallography (Fig. 2) revealed that out of the possible in-in, in-out, and out-out stereoisomers, the reaction of bis-malonates linked by o-, m-, or p-xylylene tethers afforded only the out-out ones (Scheme 1). In contrast, the use of larger tethers derived from 1,10-phenanthroline also provided a first example, (±)- 19 (Scheme 2), of an in-out product. Starting from optically pure bis-malonate derivatives, the new bis-functionalization method permitted the diastereoselective preparation of optically active fullerene derivatives (Schemes 4 and 5) and, ultimately, the enantioselective preparation (enantiomeric excess ee > 97%) of optically active cis-3 bis-adducts whose chirality results exclusively from the addition pattern (Fig. 6). The macrocyclic fixation of a bis-malonate with an optically active, 9,9′-spirobi[9H-fluorene]-derived tether to C₆₀ under generation of 24 and ent- 24 with an achiral addition pattern (Scheme 4) was found to induce dramatic changes in the chiroptical properties of the tether chromophore such as strong enhancement and reversal of sign of the Cotton effects in the circular dichroism (CD) spectra (Figs. 4 and 5). By the same method, the functionafized bis-adducts 50 and 51 (Schemes 10 and 11) were prepared as initiator cores for the synthesis of the fullerene dendrimers 62 , 63 , and 66 (Schemes 12 and 13) by convergent growth. Finally, the new methodology was extended, to the regio- and diastereoselective construction of higher cyclopropanated adducts. Starting from mono-adduct 71 , a clipping reaction provided exclusively the all-cis-2 tris-adduct (±)- 72 (Scheme 14), whereas the similar reaction of bis-adduct 76 afforded the all-cis-2 tetrakis-adduct 77 (Scheme 15). Electrochemical investigations by steady-state voltammetry (Table 2) in CH₂Cl₂ (+0.1M Bu₄NPF₆) showed that all macroeyciic bis(methano)fullerenes underwent multiple reduction steps, and that regioisomerism was not much influencing the redox potentials, All cis-2 bis-adducts gave an instable dianion which decomposed during the electrochemical reduction. In CH₂Cl₂, the redox potential of the fullerene core in dendrimers 62, 63 , and 66 is not affected by differences in size and density of the surrounding poly(ether-amide) dendrons. The all-cis-2 tris- and tetrakis(meihano)fullercnes (±) -72 and 77 , respectively, are reduced at more negative potential than previously reported all-e tris- and tetrakis-adducts with methane bridges that are also located along an equatorial belt. This indicates a larger perturbation of the original fullerene π-chromophore and a larger raise in LUMO energy in the former derivatives.     

Characterization of PEDOT film functionalized with a series of automated synthesis ferrocenyl-containing oligonucleotides

In previous works we have described a fully automated synthesis of new ferrocene labelled oligonucleotides (Fc-ODNs) probes with one or more electroactive markers at different position in the chain. These Fc-ODNs have shown good properties to detect ODN target in solution. Here we describe the post-functionalization of a conducting co-polymer based on ethylenedioxythiophene (EDOT) derivatives by a series of Fc-ODNs. The grafting of the Fc-ODNs probes resulted in the appearance of the ferrocene redox couple which directly confirm the effectiveness of the ODN anchoring compared to traditional approach based on IR spectroscopy and X-ray fluorescence of the films. Moreover, the electrochemical response of the modified electrodes analysed in organic media before and after hybridization with ODN target confirm that properties obtain in solution for Fc-ODNs already exist in the film. The changes in the current intensity were found to be dependant on the structure of the grafted ODN that validate our strategy to synthesize an optimal Fc-ODNs.