Extraction of cellulose fibers from flax and hemp: a review

Cellulose - The paper is a review on the extraction processes of cellulosic fibers from flax and hemp. The two lignocellulosic crops have a long history of use by humans for extraction of the bast...     

Analysis of moisture sorption in lyocell-polypropylene composites

The preparation of composites by thermoforming of intermingled fibre slivers is an efficient method to receive high performance and lightweight materials. Cellulosic fibres have benefits like low density and sustainability but the sorption of water due to the high hydrophilicity of the cellulose requires attention. The swelling of the wet fibres changes the fibre-matrix adhesion and as a consequence, the mechanical strength of the composite is influenced negatively. In this study, the thermoplastic polypropylene was combined with lyocell fibres as reinforcement. Moisture sorption isotherms of cellulose/polypropylene composites were recorded as function of relative humidity. Additionally, the specific surface area was analysed by the Brunauer–Emmett–Teller model. It has been found, that the moisture sorption is influenced by the polypropylene (PP) ratio in the composites. At 60% relative humidity the moisture uptake of the lyocell fibres was reduced from 10.8 to 5.8% for lyocell embedded in a composite with 50% polypropylene. Besides the hysteresis between moisture sorption/desorption cycles was found to be proportional to the increased content of PP. The “Parallel Exponential Kinetics” (PEK) model was used to analyse the kinetics of moisture sorption of these composites in more detail. With the help of the PEK model the sorption/desorption kinetics were described by a fast and slow moisture sorption/desorption process. The capacity for rapid moisture sorption is reduced by the formation of PP layers on the lyocell surface. The share of slow moisture sorption increased with increasing PP content in the composite. The results support understanding of the interaction of water with cellulose containing composites.     

Electronically driven phase transitions in a quasi-one-dimensional adsorbate system

A quasi-1D system is prepared using the Pt(110) surface as a template. The electronic surface resonance structure is studied by angle-resolved photoemission spectroscopy for the clean surface as well as for different Bromine coverages. A Fermi surface mapping reveals saddle points at the Fermi level in the interior of the surface Brillouin zone. Correspondingly, a maximum in the static response function χ(q, 0) at the connecting vector q is expected. With 1/2G_x < q < 2/3G_x one observes indeed a 3-fold periodicity around defects and a 2-fold periodicity at low temperature for Θ_Br = 0.5 ML. Cooling of a defect-free c(2×2)-Br/Pt(110) preparation counter-intuitively results in a loss of long-range order. Motivated by DFT calculations this is attributed to an anomalous order-order phase transition into the (2×1) phase accompanied by intense, strongly anisotropic fluctuations within a temperature range of ~200 K. The peculiar behaviour is rationalised in terms of a competition between inter-adsorbate repulsion and an adsorbate triggered 2k_F interaction in the substrate.     

Two-fraction and three-fraction continuous simulated moving bed separation of nucleosides

A new experimental set-up and a new simulated moving bed (SMB) operation are presented in this work. A desktop SMB unit developed as a modification of the commercial AKTA explorer working platform has been utilized for the separation of different mixtures of nucleosides. Both two fraction and three fraction SMB separations have been carried out, the latter made possible by the adoption of a new SMB configuration and operating mode (three fraction SMB, 3F-SMB, operation). Experiments demonstrate the feasibility of the 3F-SMB operation, and confirm the trends predicted based on considerations about retention of the components to be separated along the unit.     

Surface‐Imprinted Nanofilaments for Europium‐Amplified Luminescent Detection of Fluoroquinolone Antibiotics

The development and characterization of novel, molecularly imprinted polymer nanofilament‐based optical sensors for the analysis of enrofloxacin, an antibiotic widely used for human and veterinary applications, is reported. The polymers were prepared by nanomolding in porous alumina by using enrofloxacin as the template. The antibiotic was covalently immobilized on to the pore walls of the alumina by using different spacers, and the prepolymerization mixture was cast in the pores and the polymer synthesized anchored onto a glass support through UV polymerization. Various parameters affecting polymer selectivity were evaluated to achieve optimal recognition, namely, the spacer arm length and the binding solvent. The results of morphological characterization, binding kinetics, and selectivity of the optimized polymer material for ENR and its derivatives are reported. For sensing purposes, the nanofilaments were incubated in solutions of the target molecule in acetonitrile/HEPES buffer (100 mM , pH 7.5, 50:50, v/v) for 20 min followed by incubation in a 10 mM solution of europium(III) ions to generate a europium(III)–enrofloxacin complex on the polymer surface. The detection event was based on the luminescence of the rare‐earth ion (λ_exc=340 nm; λ_em=612 nm) that results from energy transfer from the antibiotic excited state to the metal‐ion emitting excited state. The limit of detection of the enrofloxacin antibiotic was found to be 0.58 μM .     

Molecularly Imprinted Polymer Nanomaterials and Nanocomposites: Atom‐Transfer Radical Polymerization with Acidic Monomers

Molecularly imprinted polymers (MIPs) are artificial receptors which can be tailored to bind target molecules specifically. A new method, using photoinitiated atom‐transfer radical polymerization (ATRP) for their synthesis as monoliths, thin films and nanoparticles is described. The synthesis takes place at room temperature and is compatible with acidic monomers, two major limitations for the use of ATRP with MIPs. The method has been validated with MIPs specific for the drugs testosterone and S‐propranolol. This study considerably widens the range of functional monomers and thus molecular templates which can be used when MIPs are synthesized by ATRP, as well as the range of physical forms of these antibody mimics, in particular films and lithographic patterns, and their post‐functionalization from living chain‐ends.