Homolytic displacement at carbon: XI. Intramolecular homolytic displacement as a route to cyclopentane and tetrahydrofuran derivatives from hex-5-enyl- andhex-3-oxo-5-enylcobaloximes

5-Methylhex-5-enylcobaloxime reacts with carbon tetrachloride and with fluorotrichloromethane at 80–100°C to give substantially pure 1-methyl-1-(β,β,β-trichloroethyl)- and 1-methyl-1-β-fluoro-β,β-dichloroethyl)-cyclopentane. Hex-5-enylco-baloxime also gives trichloroethylcyclopentane from carbon tetrachloride, but the yield is dependent on the concentration of carbon tetrachloride. Similar cyclisation to give trichloroethyl- or fluorodichloroethyltetrahydrofuran is observed in the reactions of hex-3-oxo-5-enylcobaloxime with carbon tetrachloride and fluorotrichloromethane. However, no cyclisation was observed in the reactions of the ester, hex-2-one-3-oxo-5-enylcobaloxime, with carbon tetrachloride. These reactions are believed to take place by attack of a polyhalogenomethyl radical at the terminal unsaturated carbon of the organic ligand, followed either by an intramolecular homolytic displacement in which the carbon radical at position-5 attacks carbon-1 with displacement of cobaloxime(II), or by a halogen atom abstraction.     

The phase-dependent photochemical reaction dynamics of halooxides and nitrosyl halides

Recent progress in understanding the phase-dependent reactivity of halooxides and nitrosyl halides is outlined. Halooxide reactivity is represented by the photochemistry of chlorine dioxide (OClO) and dichlorine monoxide (ClOCl). The gas phase photochemical dynamics of OClO are contrasted with the dynamics in condensed environments. The role of excited-state symmetry in defining the reaction dynamics and the observation of photoisomerization resulting in the production of ClOO are discussed. The current understanding of the excited-state reaction dynamics of ClOCl and evidence for photoisomerization of this species resulting in the production of ClClO are outlined. Finally, the photochemical reaction dynamics of the nitrosyl halide ClNO are presented. The main difference between the gas and condensed phase reaction dynamics of this species is that whereas photodissociation to form Cl and NO dominates the gas phase reaction dynamics, photoisomerization resulting in ClON production occurs to an appreciable extent in condensed environments. The observation of photoisomerization for OClO, ClOCl and ClNO suggests that this process is a general feature of the condensed phase reaction dynamics for smaller halooxides and nitrosyl halides. Finally, future areas for study in both halooxide and nitrosyl halide photoreactivity are outlined.     

Free radical rearrangements of organocobaloximes: alkynyl to cycloalkylidene and hexenyl to cyclopentylmethyl

Under irradiation by tungsten light in pyridine solution, several substituted alkylcobaloximes undergo rearrangement to more stable substituted alkyl- or alkenyl-cobaloximes. When the same reactions are carried out in the presence of carbon tetrachloride or chloroform, no rearranged organocobaloximes are obtained, but a variety of organic products are obtained derived from the interception of transient organic radicals by the halogenated solvent. The rearrangements are rationalised in terms of a reversible homolysis of the carbon-cobalt bond, rearrangement of the organic radical and recapture by the cobalt(II) fragment to give complexes that are more stable to irradiation than their precursors.     

Oxymetallation: XIX. Preparation of the first oxymercurials derived from cyclopropane

Three oxymercurials, RO(CH₂)₃HgBr where R = Bu^tO, BrHg(CH₂)₃, and Ac, have been isolated from the reaction of cyclopropane with mercury(II) acetate, t-butyl hydroperoxide, and 60% aqueous perchloric acid (20 mol%) in dichloromethane for 5 d, followed by anion exchange with aqueous potassium bromide.     

Techniques for high power microwave sources at high average power

Experiments on CLIA (compact linear induction accelerator), capable of generating 750 kV and 10 kA into a matched load using magnetic switching to produce 60 ns long pulses, are described. As a first application, the authors used CLIA to drive a water-cooled L-band magnetron at repetition rates as high as 250 Hz with no breakdown or pulse shortening. This gives an average power of 6.3 kW. A short burst at 1 kHz demonstrates operation that would translate to an average power of approximately 25 kW. In this regime operation is not limited by gas build-up, electrode erosion or microwhisker depletion. Currently, the authors are operating on CLIA with a high current relativistic klystron. Beams with modulated current powers of approximately 1 GW have been generated at 100 Hz for bursts as long as 5000 pulses. It is concluded that there are no apparent obstacles to much higher average powers at higher peak powers     

Evaluation of gel permeation chromatography to Fourier transform infrared spectrometric detection using a modified thermospray for analysis of polystyrene samples

A heated gas flow modified thermospray was used to couple gel permeation chromatography (GPC) to Fourier transform infrared spectrometry (FTIR) for the analysis of the standard polystyrene samples. Effluents from the GPC column were evaporated and the solutes were deposited as a series of spots on the surface of a moving stainless steel belt (0.025 mm thickness × 13 mm width). The belt continuously transferred the spots into the diffuse reflectance (DRIFT) accessory of the FTIR spectrometer, enabling identification of the deposited solutes by measurement of the diffuse reflectance IR spectrum. The IR spectra of the separated components showed excellent agreement of the spectral features to those of standard FTIR spectra and no thermal degradation was observed. Received: 20 May 1996 / Revised: 17 October 1996 / Accepted: 28 November 1996     

A Synthesis of an Ionomycin Calcium Complex

Caught in the middle : The ionomycin calcium complex (see structure; O red, Ca green) was the target of an approach featuring the efficient asymmetric synthesis of an allene by a copper(I)‐mediated anti‐selective S_N2′ reaction, a highly stereoselective gold(III)‐catalyzed cycloisomerization of an α‐hydroxyallene, and a Rh‐catalyzed rearrangement of an α‐diazo‐β‐hydroxyketone.

     

Continuous substoichiometric determination of traces of mercury by radioactive isotope-dilution analysis

The possibility of automating substoichiometric analysis by isotope dilution has been proposed previously. Automation where the analysis is based on solvent extraction has now been carried out experimentally. Preliminary experiments are described by means of which optimum conditions for this type of automated determination can be chosen and its reproducibility and selectivity checked. As an example traces of mercury down to 5 × 10⁻⁶ g are determined and the method is applied to the analysis of low-grade cinnabar ores.     

Modification of surface properties of a poly(dimethylsiloxane)-based elastomer, RTV11, upon exposure to seawater

Atomic force microscopy (AFM) was combined with surface analytical techniques to investigate the rarely addressed issue of the effect of seawater on the surface properties of a selected fouling-release coating, silicon elastomer RTV11 (trademark of General Electric). The exposure of the RTV11 surface to seawater resulted in a modification of its morphology and mechanical properties, as confirmed by AFM and scanning electron microscopy (SEM). Surface modification was dependent on sample preparation and curing process, namely, curing agent concentration and relative humidity during curing. The RTV11 surface remained largely unaltered for samples cured under 100% relative humidity. SEM and X-ray photoelectron spectroscopy studies confirmed that the modified surface of RTV11 had the same elemental composition as the unexposed surface of the elastomer and showed excess Ca. However, the modified surface deformed plastically under load and was stiffer than the original surface. No major change was found on surfaces exposed to nanopure water during similar times of exposure as in seawater, regardless of curing conditions. The rate of increase in the aggregate formation in seawater can be described by an exponential function, with a decay constant of approximately 4.99 x 10(-)(3) min(-)(1) and a pre-exponential factor of approximately 1.77 x 10(-)(2) microm/min.     

The nucleophilic addition of alpha-metallated 1,3-dioxanes to planar chiral cationic eta3-allylmolybdenum complexes. Synthesis of (2E,5S,6R,7E)-6-methyl-8-phenylocta-2,7-dienoic acid methyl ester, a key component of the Cryptophycins

Two adjacent stereogenic centres and a pendant alkene were constructed via nucleophilic addition of a 1,3-dioxan-4-ylcopper(I) reagent to a cationic eta3-allylmolybdenum complex as part of a synthesis of (2E,5S,6R,7E)-6-methyl-8-phenylocta-2,7-dienoic acid, a key component of the Cryptophycins. Oxidative addition of Mo(CO)(4)(THF)(2) to allyl benzoates provides an efficient synthesis of eta3-allylmolybdenum(dicarbonyl) complexes.