Intermolecular Charge-Transfer Interactions Facilitate Two-Photon Absorption in Styrylpyridine–Tetracyanobenzene Cocrystals

Cocrystals of 4-styrylpyridine and 1,2,4,5-tetracyanobenzene were successfully prepared by supramolecular self-assembly. Donor–acceptor interactions between the molecular components are the main driving force for self-assembly and contribute to intermolecular charge transfer. The cocrystals possess two-photon absorption properties that are not observed in the individual components; suggesting that two-photon absorption originates from intermolecular charge-transfer interactions in the donor–acceptor system. The origin of two-photon absorption in multichromophore systems remains under-researched; thus, the system offers a rare demonstration of two-photon absorption by cocrystallization. Cocrystal engineering may facilitate further design and development of novel materials for nonlinear optical and optoelectronic applications.     

Electropolymerization of single‐walled carbon nanotubes composited with polypyrrole as a solid‐phase microextraction fiber for the detection of acrylamide in food samples using GC with electron‐capture detection

We developed a solid‐phase microextraction coupled to GC with electron‐capture detection method for the detection of acrylamide in food samples. Single‐walled carbon nanotubes and polypyrrole were electropolymerized onto a stainless‐steel wire as a coating, which possessed a homogeneous, porous, and wrinkled surface, chemical and mechanical stability, long lifespan (over 300 extractions), and good extraction efficiency for acrylamide. The linearity range between the signal intensity and the acrylamide concentration was found to be in the range 0.001–1 μg/mL, and the coefficient of determination was 0.9985. The LOD, defined as three times the baseline noise, was 0.26 ng/mL. The reproducibility for each single fiber (n = 6) and the fiber‐to‐fiber (n = 5) repeatability prepared in the same batch were less than 4.1 and 11.2%, respectively.     

Temperature-sensitive membranes prepared from blends of poly(vinylidene fluoride) and poly(N-isopropylacrylamides) microgels

In this study, temperature-sensitive membranes were prepared by phase transition of the mixture of the temperature-sensitive poly(N-isopropylacrylamides) (PNIPAAM) microgels and poly(vinylidene fluoride). The results of Fourier transformed infrared spectrometer, X-ray photoelectron spectroscopy, elemental analysis, and scanning electron microscope photographs indicate that the PNIPAAM microgels are distributed more in the inner membrane than on the surface. The scanning electron microscope photographs reveal the blend membranes having porous surfaces with nanometer sizes and porous cross-sections with micrometer sizes. The addition of the PNIPAAM microgels is found to improve the porosity, the pore size, water flux, as well as to enhance the hydrophilicity and anti-fouling property of the blend membranes. The blend membrane shows temperature-sensitive permeability and protein rejection with the most dramatic change at around 32 °C which is the lower critical solution temperature of PNIPAAM, when water or bovine serum albumin solution flow through. Specifically, below 32 °C, the blend membrane shows a high protein rejection ratio which decreases with increasing temperature and a low water flux which increases with increasing temperature; above 32 °C, the blend membrane shows a low protein rejection ratio which decreases with increasing temperature and a high water flux which increases with increasing temperature.     

The sequestration of U(VI) on functional β-cyclodextrin-attapulgite nanorods

Eight elastomeric composites (NRU, GR1–GR4, NRBG08–NRBG24) containing mixtures of different proportions of heavy metal additives (Bi, W, Gd and Sb) have been synthesized and examined as protective shields. The NRU sample was a pure rubber matrix and served as a reference sample for heavy metal modified composites. Experimental procedure used for evaluation of the composite shields and their attenuation properties was based on the utilization of HPGe spectrometry and analysis of X-ray fluorescence radiation intensity of the heavy metal additives in the following energy ranges for: Sb (20–35 keV), Gd (35–55 keV), W (55–70 keV) and Bi (70–90 keV). The main contributor to the induced X-ray fluorescence radiation within the shield is Bi additive and the intensity of the X-ray radiation generated within the energy range of 70–90 keV strongly depends on its concentration. It was found that decreasing concentration of the Bi fraction from 0.35 (GR samples) to 0.15 (NRBG samples) results in significant lowering Bi X-ray fluorescence radiation within the 70–90 keV energy range. Secondary effect of decreasing Bi concentration was efficient diminishing excitation processes for lower Z heavy metal additives (W, Gd and Sb, GR vs. NRBG samples). As the final quality parameter of the shielding properties for the examined elastomers, dose reduction factor (DRF) coefficients were calculated for each shield. It was found, that the best shielding properties are observed for composites with lower Bi concentration (0.15 vs. 0.35 Bi mass fraction) with only slight further improvement of their parameters (DRF) with increasing of Gd concentration (Gd mass fraction 0.08, 0.16 and 0.24). The most efficient dose reduction composite was found to be NRBG24 elastomer with DRF value 0.47 (53 % dose reduction) for ca. 2 mm and 0.44 g/cm² layer thickness.     

In2BP3O12:Cr3+宽带近红外荧光粉的发光性能及应用研究※

近红外光谱技术在安防监控、食品检测、生物成像、农业等领域具有重要应用价值, 而开发出紧凑高效的近红外光源是其大规模商业应用的前提. 荧光粉转换型近红外发光二极管(light emitting diodes, LED)光源具有结构紧凑、成本低、使用寿命长、发射光谱可调等优点, 因此近些年受到广泛关注, 其关键就在于开发出能被蓝光有效激发的高性能近红外荧光粉. 本工作利用高温固相法制备了一种新型宽带近红外荧光粉In₂BP₃O₁₂:Cr³⁺, 在480 nm激发下, 荧光粉发射峰值位于950 nm, 光谱覆盖了750~1350 nm范围, 半峰宽达到210 nm. 采用该荧光粉与商用蓝光InGaN LED芯片封装, 获得了具有宽带发射的近红外LED光源, 在60 mA的驱动电流下, 近红外光辐射功率为5 mW. 当采用该光源照射人的手掌, 用近红外电感耦合器(charge coupled device, CCD)相机能够对手掌中的血管进行清晰的成像. 上述结果表明该近红外荧光粉可用于制备基于蓝光芯片的宽带近红外LED光源, 并在生物医学等领域具有潜在应用前景.     

Direct immobilization of iodine-loaded silver-coated silica gel with silicate glass powders at low temperature

Journal of Radioanalytical and Nuclear Chemistry - To long-term immobilization of secondary iodine-waste, iodine loaded silver-coated silica-gel (AgIs), glass-powder was used to directly solidify...     

A modified quick,easy, cheap,effective, rugged,and safe method with hydrophobic natural deep eutectic solvent as extractant and analyte protectant for analyzing pyrethroid residues in tomatoes

In this work, a novel quick, easy, cheap, effective, rugged, and safe technique with hydrophobic natural deep eutectic solvent as both extractant and analyte protectant was developed and combined with gas chromatography–tandem mass spectrometry to analyze pyrethroid residues in tomatoes. Eight hydrophobic natural deep eutectic solvents were first evaluated as analyte protectants and those with decanoic acid or lactic acid as hydrogen bond donor were demonstrated to be effective in compensating for the matrix effects of pyrethroids in the gas chromatography system. Hence, they were added to solvent standards for correcting the quantitation errors instead of matrix‐matched calibration standards. Then the abilities of these acid‐based deep eutectic solvents to extract pyrethriods from tomatoes were evaluated. Results showed the recoveries of all pyrethroids reached to over 80% with only 5 mL menthol:decanoic acid (1:1) used, and good phase separation was easily achieved without the addition of inorganic salt in the extraction step, indicating hydrophobic natural deep eutectic solvent could be a green substitute for acetonitrile in the quick, easy, cheap, effective, rugged, and safe extraction. Compared with the conventional method, the proposed protocol improved the recoveries, reduced the matrix effects, and simplified the extraction step, demonstrating to be an effective, fast, and green method.     

高韧性合金钢断裂韧性及疲劳裂纹扩展门槛值的联合试验方法

在柴油机曲轴、连杆等关键零部件的可靠性设计和失效评估中,断裂韧性及疲劳裂纹扩展门槛值分别是衡量材料抵抗裂纹失稳扩展和裂纹开始扩展的重要指标．但是,对于高韧性合金材料,难以通过常规试验所推荐的厚度确定平面应变断裂韧性,而门槛值的测定通常不但非常耗时,且难以直接应用于不同循环特性的实际结构．本文针对高韧性合金钢34CrNi3MoA,提出一种将断裂韧性和疲劳裂纹扩展门槛值试验合二为一的试验方法,即用同一个试件可以同时测定门槛值和断裂韧性．利用断裂韧性关于试件厚度的渐近特性,以几种较薄试件的试验,确定平面应变状态下的断裂韧性．试验结果还表明,裂纹扩展门槛值的试件厚度依存性可以忽略,并给出了任意循环特性（应力比）下的门槛值计算公式．