Effects of injector geometry and sample matrix on injection and sample loading in integrated capillary electrophoresis devices

The double-T injector design employed in many microchip capillary electrophoresis devices allows for the formation of very small (50-500 pL) sample plugs for subsequent analysis on-chip. In this study, we show that sample plugs formed at the channel junction can be geometrically defined. The channel width and injector symmetry prove to be of great importance to good performance. A unique pushback of solvent into the side channels can be induced when the side channels have a very low resistance to flow, and this helps to better define the injected sample plug. Samples and running buffers of differing ionic strength (e.g., 10 mM KCl buffer and 20 mM KCl sample) can yield widely variable results in terms of plug shape and amount injected (variations of 1.5 to 10x). Applying bias voltages to all the intersecting channels aids in controlling the plug shape. However, when the ionic strengths of buffer and sample are not matched, the actual amount injected (up to 10x variations) can be inconsistent with the appearance of the plug formed in the injector (up to only 30 % variations). Operating at constant pH and ionic strength produced the most consistent results. This report examines the effects of altering the injector geometry and solution ionic strengths, and presents the results of using bias voltages to control plug formation. The observed results should provide a benchmark for modeling of the fluid dynamics in channel intersections.     

Separation and quantitation of phycobiliproteins using phytic acid in capillary electrophoresis with laser-induced fluorescence detection

The similar electrophoretic mobilities and sizes of several of the phycobiliproteins, which are derived from the photosynthetic apparatus of cyanobacteria and eukaryotic algae, render their separation and quantitation a challenging problem. However, we have developed a suitable capillary electrophoresis (CE) method that employs a phytic acid-boric acid buffer and laser-induced fluorescence (LIF) detection with a single 594 nm He-Ne laser. This method takes advantage of the remarkably high quantum yields of these naturally fluorescent proteins, which can be attributed to their linear tetrapyrrole chromophores covalently bound to cysteinyl residues. As such, limits of detection of 1.18 x 10(-14), 5.26 x 10(-15), and 2.38 x 10(-15) mol/l were obtained for R-phycoerythrin, C-phycocyanin, and allophycocyanin proteins, respectively, with a linear dynamic range of eight orders of magnitude in each case. Unlike previously published CE-LIF methods, this work describes the separation of all three major classes of phycobiliproteins in under 5 min. Very good recoveries, ranging from 93.2 to 105.5%, were obtained for a standard mixture of the phycobiliproteins, based on seven-point calibration curves for both peak height and peak area. It is believed that this development will prove useful for the determination of phycobiliprotein content in naturally occurring cyanobacteria populations, thus providing a useful tool for understanding biological and chemical oceanographic processes.     

The proton affinity of proline analogs using the kinetic method with full entropy analysis

The proton affinity of proline analogs, L-azetidine-2-carboxylic acid (Aze), L-proline (Pro), and L-pipecolic acid (Pip), have been measured using the Armentrout modification of the extended kinetic method in a quadrupole ion trap instrument. Experimental values of 223.0 +/- 1.5, 224.9 +/- 1.6, and 225.6 +/- 1.6 kcal/mol have been determined for the 298K proton affinities of Aze, Pro, and Pip respectively. High level theoretical calculations using both MP2 and B3LYP methods at a variety of basis sets were carried out in order to give theoretical predictions for the 298 K proton affinity and gas phase basicity of all three analogs. Recommended values for the gas phase basicity and proton affinity for proline based on our work and other recent determinations are 216 +/- 2 and 224 +/- 2 kcal/mol.     

DYNGA: a general purpose QM-MM-MD program. I. Application to water

We present a general purpose QM-MM-MD engine (DYNGA) designed to test alternative hybrid Hamiltonians geared towards the treatment of problems of interest in structural biology including the use of experimental data constraints. In this first presentation we use DYNGA to explore the behaviour of a traditional QM-MM approach in the treatment of the water—water interaction. We find the potential energy hypersurface for the water dimer computed with the HF 4–31G*/TIP3P hybrid Hamiltonian tends to be too flat. We also explore the effect of using traditional QM-MM techniques on proton wires and conclude there is a need for improvement, possibly addressed by using polarizable force fields.     

ConFlo III - an interface for high precision delta(13)C and delta(15)N analysis with an extended dynamic range

A newly developed interface coupling a CHN combustion device (elemental analyser 'EA') to an isotope ratio mass spectrometer is described and evaluated. The purpose of the device is to extend the dynamic range of delta(13)C and delta(15)N analysis from less than 2 orders of magnitude to more than 3 orders of magnitude. Carbon isotope ratio measurements of atropine as a model compound have been performed analysing between 1 μg to 5 mg C with acceptable to excellent precision (0.6 to 0.06 per thousand, delta-notation). The correction due to the blank signal is critical for sample amounts smaller than 4 μg C. The maximum sample weight is determined by the combustion capacity of the EA. Larger sample amounts are measured using dilution of a small part of the EA effluent with helium. The dilution mechanism works virtually free of isotope fractionation. Copyright 1999 John Wiley & Sons, Ltd.     

PAST AND FUTURE MANAGEMENT OF A COLLAPSED FISHERY: THE BAY OF BISCAY ANCHOVY

Abstract We analyze the efficiency of the international management of the Bay of Biscay anchovy. While a sharing agreement between France and Spain has been in place since 1992, the fish stock collapsed in 2005 and the fishery closed from 2005 to spring 2010. We consider differences in production technologies between both countries and calibrate our model using data from 1987 to 2009. Our results suggest two sources of rent dissipation under the existing sharing agreement: inefficient quota allocation and production inefficiencies due to inflexible national regulations. We discuss several alternatives to improve management.     

Protein labeling with red squarylium dyes for analysis by capillary electrophoresis with laser-induced fluorescence detection

Two new red luminescent asymmetric squarylium dyes (designated "Red-1c and Red-3") have been shown to exhibit absorbance shifts to longer wavelengths upon the addition of protein, along with a concomitant increase in fluorescence emission. Specifically, the absorbance maxima for Red-1c and Red-3 dyes are 607 and 622 nm, respectively, in the absence of HSA, and 642 and 640 nm in the presence of HSA, making the excitation of their protein complexes feasible with inexpensive and robust diode lasers. Fluorescence emission maxima, in the presence of HSA, are 656 and 644 nm for Red-1c and Red-3, respectively. Because of the inherently low fluorescence of the dyes in their free state, Red-1c and Red-3 were used as on-column labels (that is, with the dye incorporated into the separation buffer), thus eliminating the need for sample derivatization prior to injection and separation. A comparison of precolumn and on-column labeling of proteins with these squarylium dyes revealed higher efficiencies and greater sensitivities for on-column labeling, which, when conducted with a basic, high-salt content buffer, permitted baseline resolution of a mixture of five model proteins. LOD for model proteins, such as transferrin, alpha-lactalbumin, BSA, and beta-lactoglobulin A and B, labeled with these dyes and analyzed by CE with LIF detection (CE-LIF) were found to be dependent upon dye concentration and solution pH, and are as low as 5 nM for BSA. Satisfactory linear relationships between peak height (or peak area) and protein concentration were obtained by CE-LIF for this on-column labeling method with Red-3 and Red-1c.     

Determination of phycobiliproteins by capillary electrophoresis with laser-induced fluorescence detection

Phycobiliproteins are derived from the photosynthetic apparatus of cyanobacteria and eukaryotic algae. They are composed of a protein backbone to which linear tetrapyrrole chromophores are covalently bound. Furthermore, they are water-soluble highly fluorescent, and relatively stable at room temperature and neutral pH. For this reason, capillary electrophoresis-laser induced fluorescence (CE-LIF) seems the idea method for determination of these important proteins. The effects of buffer additives such as sodium dodecyl sulfate (SDS)and putrescine on the separation of the three major phycobiliprotein types, namely allophycocyanin, phycocyanin, and phycoerythrin, with excitation and emission maxima at 652/660, 615/647, and 565(494)/575 nm, respectively, are considered. Detection limits for these proteins by CE-LIF are some 60-500 times better than by absorbance detection. The development of a fast and sensitive CE-LIF assay such as this is of potential significance to our understand ing of chemical and biological oceanographic processes.