Optimization of extraction procedure and chromatographic separation of glyphosate, glufosinate and aminomethylphosphonic acid in soil

Analysing herbicides in soil is a complex issue that needs validation and optimization of existing methods. An extraction and analysis method was developed to assess concentrations of glyphosate, glufosinate and aminomethylphophonic acid (AMPA) in field soil samples. After testing extractions by accelerated solvent extraction and ultrasonic extraction, agitation was selected with the best recoveries. Water was preferred as solvent extraction because it resulted in a cleaner chromatogram with fewer impurities than was the case with alkaline solvents. Analysis was performed by FMOC pre-column derivatization followed by high-performance liquid chromatography (HPLC) on a 300 mm C(18) column which permitted enhanced separation and sensitivity than a 250 mm C(18) column and increased resistance than the NH(2) column for soil samples. This extraction and analysis method allowing a minimum of steps before the injection in the HPLC with fluorescence detection is efficient and sensitive for a clay-loamy soil with detection limits of 103 μg kg(-1) for glyphosate, 15 μg kg(-1) for glufosinate and 16 μg kg(-1) for AMPA in soil samples.     

Direct Synthesis of Peptide-Containing Silicones: A New Way to Bioactive Materials

A simple and efficient way to synthesize peptide-containing silicone materials is described. Silicone oils containing a chosen ratio of bioactive peptide sequences were prepared by acid-catalyzed copolymerization of dichlorodimethylsilane, hybrid dichloromethyl peptidosilane, and Si(vinyl)- or SiH-functionalized monomers. Functionalized silicone oils were first obtained and then, after hydrosilylation cross-linking, bioactive polydimethylsiloxane (PDMS)-based materials were straightforwardly obtained. The introduction of an antibacterial peptide yielded PDMS materials showing activity against Staphylococcus aureus. PDMS containing RGD ligands showed improved cell-adhesion properties. This generic method was fully compatible with the stability of peptides and thus opened the way to the synthesis of a wide range of biologically active silicones.     

Site‐Specific Dual Labeling of Proteins on Cysteine Residues with Chlorotetrazines

Dual‐labeled biomolecules constitute a new generation of bioconjugates with promising applications in therapy and diagnosis. Unfortunately, the development of these new families of biologics is hampered by the technical difficulties associated with their construction. In particular, the site specificity of the conjugation is critical as the number and position of payloads can have a dramatic impact on the pharmacokinetics of the bioconjugate. Herein, we introduce dichlorotetrazine as a trivalent platform for the selective double modification of proteins on cysteine residues. This strategy is applied to the dual labeling of albumin with a macrocyclic chelator for nuclear imaging and a fluorescent probe for fluorescence imaging.     

Analytical methods for monoterpene glycosides in grape and wine. II. Qualitative and quantitative determination of monoterpene glycosides in grape.

Free and glycosidically bound terpenes of five Vitis vinifera grape cultivars (muscat of Alexandria, muscat of Frontignan, muscat of Hamburg, muscat Ottonel and Gewürztraminer) were investigated. The free and bound fractions were separated by selective retention on Amberlite XAD-2 resin. The glycosidic fractions were analysed by gas chromatography and gas chromatography-mass spectrometry using either enzymic hydrolysis and subsequent analysis of the released aglycones or trimethylsilyl (TMS) and trifluoroacetyl derivatives. The known monoterpenyl, benzyl and 2-phenylethyl beta-D-glucopyranosides, beta-rutinosides, 6-O-alpha-L-arabinofuranosyl-beta-D-glucopyranosides and 6-O-beta-D-apiofuranosyl-beta-D-glucopyranosides were determined. A number of other glycosides were detected and the structures of some of them, mainly apiosylglucosides and glucosides with aglycones in higher oxidation state than linalol, were tentatively identified using the mass spectra of their TMS and TFA derivatives and the results obtained from the analysis of their aglycones.     

Playing with PtII and ZnII Coordination to Obtain Luminescent Metallomesogens

Blue–green luminescent terpyridine-containing Pt^II and Zn^II complexes are reported. Equipped with lipophilic gallate units, which act as monodentate ancillary coordinating ligands and/or as anions, they display low-temperature mesomorphic properties (lamello-columnar and hexagonal mesophases for Pt^II and Zn^II complexes, respectively). The mesomorphic properties were investigated by polarised optical microscopy, differential scanning calorimetry, thermogravimetric analysis and X-ray scattering of bulk materials and oriented thin films. The model of self-assembly into the lamello-columnar phase of the Pt^II complex has been described in detail. The optical properties of the complexes were investigated in the liquid and condensed liquid crystalline states, highlighting the delicate balance between the role of the metal in determining the type of excited state responsible for the emission, and the role of the ancillary ligand in driving intermolecular interactions for proper mesophase formation.     

Magneto-optical interactions in single-molecule magnets: Low-temperature photon-induced demagnetization

We show that the irradiation of SMM molecules at optical wavelengths can drive an increase or a decrease of the magnetic moment of a SMM, even though the energy of the photons does not correspond to a precise electronic or spin transition, the light pulse triggering a phonon-assisted spin transition. The process is sensitive to the power of the incident light. This result most probably explains why it has been so far impossible to observe the opening of the hysteresis loop on thin films of SMM with the XMCD technique. The consequences of these observations are manifold: they bring a means of controlling molecular magnets, open prospects in the field of quantum computing, and may enable the realization of coherent microwave sources through stimulated superradiance.     

Identification and quantification of bisphenol A and bisphenol B in polyvinylchloride and polycarbonate medical devices by gas chromatography with mass spectrometry

A gas chromatography with mass spectrometry method has already been developed and published for the identification and quantification of 14 phthalates and five nonphthalate plasticizers in polyvinylchloride medical devices. In order to assay, in addition to plasticizers, bisphenols A and B possibly present in polyvinylchloride samples, this previous method was extended to the assay of these additional potential endocrine disruptors. Furthermore, as bisphenol A could also be present in polycarbonate samples, the method used for the polyvinylchloride sample was tested and validated for the assay of bisphenols A and B in polycarbonate medical devices. The separation of all compounds, including bisphenols A and B, is obtained on a cross‐linked 5%‐phenyl/95%‐dimethylpolysiloxane capillary column using a temperature gradient. For both plastics, samples are dissolved in tetrahydrofuran followed by a precipitation of the plastic by addition of ethanol. Results obtained point out residual bisphenol A amounts for polycarbonate samples ranging from 0.6 to 0.8% and for polyvinylchloride samples less or equal to 5 ppm. No bisphenol B was detected in the samples tested. For bisphenols A and B, mean recoveries obtained on spiked polyvinylchloride or polycarbonate sample preparations ranged from 87 to 108% in accordance with in‐house specification (80–110%).