Optimization of extraction procedure and chromatographic separation of glyphosate, glufosinate and aminomethylphosphonic acid in soil

Analysing herbicides in soil is a complex issue that needs validation and optimization of existing methods. An extraction and analysis method was developed to assess concentrations of glyphosate, glufosinate and aminomethylphophonic acid (AMPA) in field soil samples. After testing extractions by accelerated solvent extraction and ultrasonic extraction, agitation was selected with the best recoveries. Water was preferred as solvent extraction because it resulted in a cleaner chromatogram with fewer impurities than was the case with alkaline solvents. Analysis was performed by FMOC pre-column derivatization followed by high-performance liquid chromatography (HPLC) on a 300 mm C(18) column which permitted enhanced separation and sensitivity than a 250 mm C(18) column and increased resistance than the NH(2) column for soil samples. This extraction and analysis method allowing a minimum of steps before the injection in the HPLC with fluorescence detection is efficient and sensitive for a clay-loamy soil with detection limits of 103 μg kg(-1) for glyphosate, 15 μg kg(-1) for glufosinate and 16 μg kg(-1) for AMPA in soil samples.     

Direct Synthesis of Peptide-Containing Silicones: A New Way to Bioactive Materials

A simple and efficient way to synthesize peptide-containing silicone materials is described. Silicone oils containing a chosen ratio of bioactive peptide sequences were prepared by acid-catalyzed copolymerization of dichlorodimethylsilane, hybrid dichloromethyl peptidosilane, and Si(vinyl)- or SiH-functionalized monomers. Functionalized silicone oils were first obtained and then, after hydrosilylation cross-linking, bioactive polydimethylsiloxane (PDMS)-based materials were straightforwardly obtained. The introduction of an antibacterial peptide yielded PDMS materials showing activity against Staphylococcus aureus. PDMS containing RGD ligands showed improved cell-adhesion properties. This generic method was fully compatible with the stability of peptides and thus opened the way to the synthesis of a wide range of biologically active silicones.     

Site‐Specific Dual Labeling of Proteins on Cysteine Residues with Chlorotetrazines

Dual‐labeled biomolecules constitute a new generation of bioconjugates with promising applications in therapy and diagnosis. Unfortunately, the development of these new families of biologics is hampered by the technical difficulties associated with their construction. In particular, the site specificity of the conjugation is critical as the number and position of payloads can have a dramatic impact on the pharmacokinetics of the bioconjugate. Herein, we introduce dichlorotetrazine as a trivalent platform for the selective double modification of proteins on cysteine residues. This strategy is applied to the dual labeling of albumin with a macrocyclic chelator for nuclear imaging and a fluorescent probe for fluorescence imaging.     

On the geometry of Nash equilibria and correlated equilibria

It is well known that the set of correlated equilibrium distributions of an n-player noncooperative game is a convex polytope that includes all the Nash equilibrium distributions. We demonstrate an elementary yet surprising result: the Nash equilibria all lie on the boundary of the polytope.We are grateful to Francoise Forges, Dan Arce, the editors, and several anonymous referees for helpful comments. This research was supported by the National Science Foundation under grant 98–09225 and by the Fuqua School of Business.The use of correlated mixed strategies in 2-player games was discussed by Raiffa (1951), who noted: it is a useful concept since it serves to convexify certain regions [of expected payoffs] in the Euclidean plane. (p. 8)Received: April 2002 / Revised: November 2003     

A TEM and XRD study of the SbNbSe3 misfit layer structures

Two new misfit layer structures have been synthesized within the Sb-Nb-Se system. Powder X-ray diffraction and electron microscopy techniques (electron diffraction, HREM, XEDS) have been used to determine the nature of their structure. According to TEM and XEDS data (for more than 15 crystals studied) both phases are monolayer type, i.e. (SbSe)1+delta (NbSe2). Electron microscopy reveals a composite modulated structure that consists of the periodical intergrowth of a pseudotetragonal SbSe layer, denominated as Q, and a pseudohexagonal layer NbSe2, denominated as H. Both layers fit along b, stack along c and do not fit along a (misfit) giving rise to an incommensurate modulation along this direction. The two phases differ in the symmetry of the Q layers being in one case orthorhombic (for delta = 0.17) and monoclinic in the other (for delta = 0.19). After the characterization of the sample by electron microscopy the unit cells of the basic layers could be refined for both phases by powder X-ray diffraction: aQ = 5.824(2) A, bQ = 5.962(5) A, cQ = 23.927(6) A, alpha = 90 degrees, beta = 90 degrees and gamma = 90 degrees and aH = 3.415(5) A, bH = 5.962(6) A,, cH = 11.962(1) A, alpha = 90 degrees, beta = 90 degrees and gamma = 90 degrees for the orthorhombic phase; aQ = 5.844(2) A, bQ = 5.981(1) A, cQ = 23.919(5) A, alpha = 90 degrees, beta = 90 degrees and gamma = 96.00(3)degrees and aH = 3.439(1) A, bH = 5.994(2) A, cH = 11.956(3) A, alpha = 90 degrees, beta = 90 degrees and gamma = 90 degrees for the monoclinic phase. The phase with the monoclinic Q-sublattice often appears as twinned crystals. The more abundant crystals are disordered intergrowths of both monolayer phases.     

Identification and quantification of bisphenol A and bisphenol B in polyvinylchloride and polycarbonate medical devices by gas chromatography with mass spectrometry

A gas chromatography with mass spectrometry method has already been developed and published for the identification and quantification of 14 phthalates and five nonphthalate plasticizers in polyvinylchloride medical devices. In order to assay, in addition to plasticizers, bisphenols A and B possibly present in polyvinylchloride samples, this previous method was extended to the assay of these additional potential endocrine disruptors. Furthermore, as bisphenol A could also be present in polycarbonate samples, the method used for the polyvinylchloride sample was tested and validated for the assay of bisphenols A and B in polycarbonate medical devices. The separation of all compounds, including bisphenols A and B, is obtained on a cross‐linked 5%‐phenyl/95%‐dimethylpolysiloxane capillary column using a temperature gradient. For both plastics, samples are dissolved in tetrahydrofuran followed by a precipitation of the plastic by addition of ethanol. Results obtained point out residual bisphenol A amounts for polycarbonate samples ranging from 0.6 to 0.8% and for polyvinylchloride samples less or equal to 5 ppm. No bisphenol B was detected in the samples tested. For bisphenols A and B, mean recoveries obtained on spiked polyvinylchloride or polycarbonate sample preparations ranged from 87 to 108% in accordance with in‐house specification (80–110%).     

Bioactive peptides grafted silicone dressings: A simple and specific method

The need for bioactive dressings increases with the population aging and the prevalence of chronic diseases. In contrast, there are very few dressings on the market which are designed to display a chosen bioactivity. In this context, we investigated the surface-functionalization of silicone wound dressing with bioactive peptides. One of the challenges was to avoid multistep grafting reactions involving catalysts, solvents or toxic reagents, which are not suitable for the fabrication of medical devices at an industrial scale. In the other hand, a covalent bonding was necessary to avoid the loss of the biological effect by progressive removal of the peptide in biological fluids generated by the wound. To solve these limitations, we developed a strategy allowing an easy and direct functionalization of silicone. This strategy relies on hybrid silylated bioactive peptides, which chemoselectively react with plasma-activated silicone surfaces. We synthesized three hybrid peptides with wound healing properties, which were grafted on commercially available silicone dressings Cerederm^® and Mepitel^®. Grafted dressings were evaluated in vitro and enabled a quicker scare recovery and extracellular matrix deposition with human dermal fibroblasts. These results were confirmed by in vivo studies showing an enhanced wound-healing of the pig skin. By this simple method, we transformed inert dressing into bioactive dressing which showed properties of wound healing.