Self-injection length in La0.7Ca0.3MnO3-YBa2Cu3O7-δ ferromagnet-superconductor multilayer thin films

We have carried out extensive studies on the self-injection problem in barrierless heterojunctions between La_0.7Ca_0.3MnO₃ (LCMO) and YBa₂Cu₃O_7-δ (YBCO) thin films. The heterojunctions were formed in situ by sequentially growing LCMO and YBCO films on 〈100〉 LaAlO₃ (LAO) substrate using a pulsed laser deposition (PLD) system. YBCO micro-bridges with 64 μm width were patterned both on the LAO (control) and LCMO side of the substrate. Critical current, I _c, was measured at 77 K on both the control side as well as the LCMO side for different YBCO film thickness. It was observed that while the control side showed a J _c of ∼ 2 × 10⁶ A/cm², the LCMO side showed about half the value for the same thickness (1800 ?). The difference in J _c indicates that a certain thickness of YBCO has become ‘effectively’ normal due to self-injection. From the measurement of J _c at two different thicknesses (1800 ? and 1500 ?) of YBCO films both on the LAO as well as the LCMO side, the value of self-injection length (at 77 K) was estimated to be ∼ 900 ?. To the authors’ best knowledge, this is the first time that self-injection length has been quantified. A control experiment carried out with LaNiO₃ deposited by PLD on YBCO did not show any evidence of self-injection.     

Magnetoelectric effect in cobalt ferrite-barium titanate composites and their electrical properties

CoFe₂O₄-BaTiO₃ composites were prepared using conventional ceramic double sintering process with various compositions. Presence of two phases in the composites was confirmed using X-ray diffraction. The dc resistivity and thermoemf as a function of temperature in the temperature range 300 K to 600 K were measured. Variation of dielectric constant (ɛ′) with frequency in the range 100 Hz to 1 MHz and also with temperature at a fixed frequency of 1 kHz was studied. The ac conductivity was derived from dielectric constant (ɛ′) and loss tangent (tan δ). The nature of conduction is discussed on the basis of small polaron hopping model. The static value of magnetoelectric conversion factor has been studied as a function of magnetic field.     

Energy dependence of multiplicity in proton-nucleus collisions and models of multiparticle production

This is a continuation of our earlier investigation (Gurtuet al 1974Phys. Lett. 50 B 391) on multiparticle production in proton-nucleus collisions based on an exposure of emulsion stack to 200 GeV/c beam at the NAL. It is found that the ratioR _em = 〈n _s〉/〈n _ch〉, where 〈n _ch〉 is the charged particle multiplicity in pp-collisions, increases slowly from about 1 at 10 GeV/c to 1·6 at 68 GeV/c and attains a constant value of 1·71 ± 0·04 in the region 200 to 8000 GeV/c. Furthermore,R _em = 1·71 implies an effectiveA-dependence ofR _A =A ^0.18,i.e., a very weak dependence. Predictions ofR _em on various models are discussed and compared with the emulsion data. Data seem to favour models of hadron-nucleon collisions in which production of particles takes place through adouble step mechanism,e.g., diffractive excitation, hydrodynamical and energy flux cascade as opposed to models which envisage instantaneous production.     

微磁动力学的新进展

本文介绍微磁动力学领域的一个最新进展,我们的研究发现在磁场驱动下且保持畴结构不变地沿着纳米磁线运动的磁畴壁,其运动源于能量耗散,磁畴壁运动速度正比于能量耗散率。与此同时,我们根据能量守恒原则,给出了磁畴壁速度的一个合理定义,该定义适用于任意的磁畴壁结构。在此定义下,即使磁畴壁没有做刚性运动,我们也能得到磁畴壁运动的瞬时速度和平均速度。我们的结果不仅能重复低磁场下的沃克（Walker）解,还能反映出当磁场高于沃克极限（Walker limit）时速度{磁场的依赖关系,该结果跟数值模拟和实验数据都符合得很好。我们根据微磁动力学研究的这一新进展,最终澄清了一个事实即“磁畴壁质量”这个概念是错误的。     

RUPTURING OF POLYMER FILMS WITH RUBBING-INDUCED SURFACE DEFECTS

It has been a long-standing question whether dewetting of polymer film from non-wettable substrate surfaceswherein the bicontinuous morphology never forms in the dewetting film is due to spinodal instability or heterogeneousnucleation. In this experiment, we use a simple method to make the distinction through introduction of topographical defectsof the films by rubbing the sample surface with a rayon cloth. Spinodal dewetting is identified for those films that dewet by acharateristic wavevector, q, independent of the density of rubbing-induced defects. Heterogeneous nucleation, on the otherhand, is identified for those with q increasing with increasing density of defects. Our result shows that PS films on oxidecoated silicon with thickness less than ≈ 13 nm are dominated by spinodal dewetting, but the thicker films are dominated bynucleation dewetting. We also confirm that spinodal dewetting does not necessarily lead to a bicontinuous morphology in thedewetting film, contrary to the classic theory of Cahn.     

Chemical Force Microscopy Study of Adhesion and Friction between Surfaces Functionalized with Self-Assembled Monolayers and Immersed in Solvents

Adhesive and frictional forces between surfaces modified with self-assembled monolayers (SAMs) and immersed in solvents were measured with chemical force microscopy as functions of surface functionality and solvent. Si/SiO2 substrates were modified with SAMs of alkylsiloxanes (SiCl3(CH2)n-X), and gold-coated AFM tips were modified with SAMs of alkylthiolates (HS-(CH2)n-X). SAMs of alkylsiloxanes terminated in a methyl or oxidized vinyl group; SAMs of alkanethiolates terminated in a methyl or carboxyl group. Adhesive and frictional forces were measured in hexadecane, ethanol, 1,2-propanediol, 1,3-propanediol, and water. The work of adhesion (W) was calculated with the Johnson-Kendall-Roberts theory of adhesive contact. The JKR values agreed well with values derived from the Fowkes-van Oss-Chaudhury-Good surface tension model and from contact angle results. Calculated values of W for all combinations of contacting surfaces and solvents spanned two orders of magnitude. W correlated with the surface tension of the solvent for hydrophobic/hydrophobic interactions; hydrophilic/hydrophilic and hydrophobic/hydrophilic interactions were more complex. Friction forces were fit to a modified form of Amonton's law. For any solvent, friction coefficients were largest for the hydrophilic/hydrophilic contacting surfaces. The friction coefficient for any contacting pair was largest in hexadecane. In polar solvents, friction coefficients scaled with solvent polarity only for hydrophobic/hydrophobic contacting pairs. Copyright 1999 Academic Press.     

Assignment of continuous spectra by photofragment spectroscopy: C state of I2

Photofragment spectroscopy has been used to probe the C state of iodine by determining its symmetry and dissociation products. By crossing a molecular beam with a powerful pulsed laser beam in high vacuum and monitoring the arrival times of the recoiling photofragments with a mass spectrometer detector, the translational energy distribution of the photodis-sociation products is measured. From energy balance the fragment internal energy is then calculated. Our peak indicates that the C state dissociates to one excited and one ground state atom. The symmetry of the transition is determined by rotating the plane of polarization of the laser light and measuring a fragment angular distribution. The transition was found to be 1 ← 0. The results are consistent with Mulliken's assignment of the C state as 1441 $\text{1}{}_{\mathrm{u}}\text{(}{}^3\text{Σ}{}^{\mathrm{+}}\text{)}$, but inconsistent with the earlier assignment of 2332 $\text{0}{}_{\mathrm{u}}{}^{\mathrm{?}}\text{(}{}^3\text{Σ}{}^{\mathrm{+}}\text{)}$ by Mathieson and Rees.     

Working group report: Heavy-ion physics and quark-gluon plasma

This is the report of Heavy Ion Physics and Quark-Gluon Plasma at WHEPP-09 which was part of Working Group-4. Discussion and work on some aspects of quark-gluon plasma believed to have created in heavy-ion collisions and in early Universe are reported.