Determination of thallium and lead in cadmium salts by anodic stripping voltammetry with addition of surfactants to suppress the cadmium peaks

Conditions have been found which make possible the determination of thallium and/or lead in cadmium and its salts without preliminary separation. The electrochemical activity of the cadmium, which usually interferes in the determination of thallium, is inhibited by the addition of 0.01% of polyethylene glycol of M.W. 4000. Thallium is determined by electrolysis at ?0.74 V vs. SCE, in 0.1M EDTA solution: 10^?1M thallium can be determined in the presence of 0.1M cadmium, while copper and lead at 10^?2M and 10^?5M respectively do not interfere. Lead is determined in 0.1M acetic acid containing 0.1% cetyltrimethylammonium bromide (CTAB). The addition of CTAB shifts the cadmium peak, as well as the optimum deposition potential for cadmium, to more negative values, making it possible to determine lead in the presence of cadmium as long as the deposition potential lies in the range between ?0.50 and ?0.56 V vs. SCE. Lead can be determined in the presence of ten times as much thallium.     

Electron impact mass spectrometry of some 6-substituted tetrazolo[1,5-c]pyrimidin-5(6H)-ones

The electron impact mass spectra of 6-methyltetrazolo[1,5-c]pyrimidin-5(6H)-one, its 7- and 8-methyl derivatives, three 8-halo derivatives and two related nucleosides are reported. On the basis of the high-resolution data and detected metastable ions, the fragmentation routes of their molecular ions are proposed. Coexistence of the tautomeric forms of the title compounds of cyclic (tetrazole) or linear (azide) structure can be suggested owing to the fragmentation pathways identified for the bases. Decomposition of the related nucleosides lies in the breaking of nucleoside bonds to produce the appropriate base and sugar fragments.     

Electrochemical masking for removal of the titanium matrix effect in DPASV determination of thallium

The possibilities for eliminating the matrix effect caused by large concentrations of titanium in an EDTA-based electrolyte have been examined. In these solutions titanium gives a DPASV peak, the height of which decreases with increase in preconcentration time. This effect depends on the pH and is probably caused by impurities in the EDTA. Complete damping of the titanium peak by means of this effect is not possible. The influence of the following surfactants on the DPASV peak for titanium in 0.2M EDTA at pH 4.5 was investigated: polyoxyethylated alkylphenols having an average of 3 and 9.5 ethylene oxide sub-units; polyoxyethylene alcohols having an average of 5 and 20 ethylene oxide sub-units; polyoxyethylene (glycerol mono-oleate) ether having an average of 20 ethylene oxide sub-units; polyoxyethylene (sorbitol mono-oleate) ether having an average of 20 ethylene oxide sub-units; poly(ethylene oxide) having M.W. 5.0 x 10(6); poly(ethylene oxide)poly(propylene oxide) block copolymer having M.W. 1.625 x 10(4); N,N,N,N',N',N'-hexamethylhexamethylenediammonium bromide (HMB); benzyl(diisobutylphenoxyethoxy) dimethylammonium chloride; hexadecyltrimethylammonium bromide; tetrabutylammonium chloride (TBAC); hexadecyldimethylbenzylammonium chloride, hexadecyltributylphosphonium bromide; tetraphenylphosphonium bromide; sodium dodecylsulphate; sodium stearate; sodium dodecylbenzenesulphonate; sodium octadecyloxyethylene ether sulphate; sodium octadecyloxyethylene ether malonate (Malester). Except for TBAC and HMB all the surfactants investigated decreased the titanium peak, although to different degrees. Generally the effect increased in the sequence cationic surfactants < non-ionic surfactants < anionic surfactants. The more hydrophobic non-ionic surfactants decreased the titanium peak more strongly than did the less hydrophobic ones. Malester was found the best of the investigated surfactants for this purpose. Sodium dodecylbenzenesulphonate also gave good results, although in this case an additional peak appeared. In the presence of these last two surfactants iron(III) does not substantially disturb the base-line current.     

Interface formation of Al2O3 on n‐GaN(0001): Photoelectron spectroscopy studies

Al₂O₃ insulator layers were deposited step by step by the physical vapor deposition (PVD) method onto gallium nitride in the wurtzite form, n‐type and (0001)‐oriented. The substrate surface and the early stages of Al₂O₃/n‐GaN(0001) interface formation were characterized in situ under ultra‐high vacuum conditions by X‐ray and ultraviolet photoelectron spectroscopy (XPS, UPS). The electron affinity (EA) of the substrate cleaned by annealing was 3.6 eV. Binding energies of the Al 2p (76.0 eV) and the O 1s (532.9 eV) confirmed the creation of the Al₂O₃ compound in the deposited film for which the EA was 1.6 eV. The Al₂O₃ film was found to be amorphous with a bandgap of 6.9 eV determined from the O 1s loss feature. As a result, the calculated Al₂O₃/n‐GaN(0001) valence band offset (VBO) is ?1.3 eV and the corresponding conduction band offset (CBO) 2.2 eV.     

Titanium dipyrrolylmethane derivatives: rapid intermolecular alkyne hydroamination

Alkynes are rapidly hydroaminated by primary amines using titanium dipyrrolylmethane derivatives as catalyst.     

Interaction of hydrogen with palladium surface: FIM and FEM studies

In the present paper, we focus on the geometrical and electronic changes in palladium surface structure which appeared during its interaction with hydrogen in the presence of an external electric field. The interaction process was examined by using the field ion microscopy (FIM) as well as the field emission microscopy (FEM) techniques. In order to study the geometrical changes in substrate surface structure, the distance distribution function (DDF) was constructed on the basis of FIM patterns of both a clean and hydrogen-covered palladium surface. The electronic changes were examined by the measurement of the total energy distribution (TED) of electrons emitted from the palladium tip surface. The most pronounce examples of such changes are an expansion of the equilibrium interatomic distance in palladium surface and a shift of the Fermi level of the metal. These changes may be explained among others by palladium hydrides formation. This process is the most efficient if the field strength exceeds 23 V/nm.     

Facile and practical synthesis of a cannabinoid-1 antagonist via regio- and stereoselective ring-opening of an aziridinium ion

A scalable synthetic strategy of a chiral, trisubstituted imidazolidinone (1), a novel cannabinoid-1 antagonist, starting from a commercially available mandelic acid (5) is described. The key step involves a regio- and stereoselective ring-opening of an aziridinium ion by an aniline nucleophile (3). A mechanistic study revealed the insight into rate amplification at a lower temperature for vicinal diamine 12 formation via a aziridinium ion 14. Although most intermediates are not isolable by crystallization due to their intrinsic physical properties (oil or foamy solid), the reported synthesis furnished pure 1 without any chromatography purification throughout the entire synthesis. Employing green chemistry principles, this novel synthesis appears to be highly efficient for the manufacturing of multi-kilogram quantities of an optically-pure active pharmaceutical ingredient.     

Investigation of transition metal-imido bonding in M(NBut)2(dpma)

A complete series down group 6 of the formula M(NBu(t))(2)(dpma) has been synthesized, where dpma is N,N-di(pyrrolyl-alpha-methyl)-N-methylamine. A fourth complex, Mo(NAr)(2)(dpma) (4), was also prepared, where Ar is 2,6-diisopropylphenyl. All four of these complexes display geometries in the solid state best described as square pyramidal with one imido ligand occupying the axial position and the other an equatorial site. In all cases, the axial imido ligand has a significantly smaller M-N(imido)-C bond angle with respect to the equatorial multiple-bond substituent. From the (1)H, (13)C, and (14)N NMR spectra, the axial (bent) imido appears to be more electron-rich than the equatorial and linear imido, with the differences becoming less pronounced down the column. The angular deformation energies for the axial imido ligands were studied by DFT in order to discern if and to what extent imido bond angles were important energetically. The electronic energies associated with straightening the axial imido ligand, while holding the remainder of the molecule at the ground-state geometry, for the Cr, Mo, and W derivatives were calculated as 4.5, 2.7, and 2.0 kcal/mol, respectively. A straight-line plot is found for deformation energies versus estimated electronegativity of the group 6 metals in the +6 oxidation state. The study suggests that the electronic differences between metal imido ligands of different angles are quite small; however, the effects may be more pronounced for metal centers with higher electronegativity, e.g. Cr(VI) with electron-withdrawing ligands.     

Determination of thallium in bismuth by differential pulse anodic-stripping voltammetry without preliminary separation

The determination of trace levels of thallium in bismuth and bismuth salts by differential pulse anodic-stripping voltammetry has been made possible by using a surfactant as an electrochemical masking agent, in addition to a complexing agent. In 0.2M EDTA at pH 4.5 as supporting electrolyte in the absence of surfactant, bismuth at concentrations below 10(-4)M does not interfere. When the electrolyte also contains tetrabutylammonium ions at 0.01 M concentration, bismuth can be tolerated at concentrations up 0.05M, and the height of the thallium peak is unaffected. It is thus possible to determine 1 nM Tl(I) in the presence of 0.05M Bi(III), i.e., Tl at the 1 x 10(-6)% level in bismuth. The precision of the determination and the recovery are satisfactory. Neither an 800-fold ratio of Cu(II) nor a 10(7)-fold ratio of Pb(II) to Tl(I) interferes in the determination. Other cations such as Zn(2+), Cd(2+), In(3+), Hg(2+), Fe(3+), Sb(3+) and Sn(4+) in 10(4)-fold molar ratio to Tl(I) have no effect on the determination. Thallium has been determined in bismuth metal and in bismuth nitrate of various degrees of purity.