A new molecular rectifier device and some research in its processing

Organic materials of D-π-A type MR-X (MR-1: p-dimethylaminophenylethenetrica-rbonitrile and MR-2: p-diphenylaminophenylethene tricarbonitrile) were designed and synthesized. The device with a sandwich structure shows good rectificative phenomena. The highest rectification ratio 10000 was achieved in device Cu/MR-1/Ag, and about 100 in other device M/MR-X/M (M: Cu, Ag). It has been found that rectificative phenomena exist only in the atmosphere-liquid interface region by means of liquid adsorption, and electric field could help form the oriented molecular film. __________ Translated from Journal of Fudan University (Natural Science), 2005, 44(4) (in Chinese)     

新席夫碱吡哆醛缩邻氨基酚的合成及其分析应用研究

本文研究了新席夫碱吡哆醛缩邻氨基酚的合成及其分析应用，提出了钒（Ｖ）的分光光度测定法，该法简便，灵敏，选择性好。     

锥体棱镜的加工

本文简单地叙述了锥体棱镜两种加工工艺。重点介绍直接成型法加工中对角度误差~1″的控制。并提出了角度超差零件返修时的光胶方法。     

Underpotential deposition of tin(II) on a gold disc electrode and determination of tin in a tin plate sample

This work describes a study of the underpotential deposition (UPD) of Sn²⁺ on a polycrystalline gold disc electrode using cyclic voltammetry (CV) and chronocoulometry (CC). Sn²⁺ ions showed well-defined peaks from UPD and UPD stripping (UPD-S) in 1 mol/L HCl solutions, while bulk deposition (BD) and BD stripping (BD-S) of the ions were also observed. The measured UPD shifts, E_UPD, between the UPD-S and the BD-S peaks were more than 200 mV. The UPD charge and the surface coverage of tin were measured by CC. A new method for determining Sn²⁺ was therefore developed, based on the excellent electrochemical properties of the Au/Sn UPD system. A plot of the UPD-DPASV (differential pulse anodic stripping voltammetry) signal versus the Sn(II) concentration was obtained for [Sn(II)] of 1.98×10^–7 to 3.64×10^–5 M. The method developed here has been applied to determine the tin in a tin plate sample.     

氨基羧酸纤维分离富集-电感耦合等离子体原子发射光谱法测定多种痕量稀土元素

本文制备了氨基羧酸纤维滤纸片作为柱填充物，成功地分离和富集了地化样品中的多种稀土元素。富集后的稀土元素采用电感耦合等离子体原子发射光谱法测定，回收率为90％～109％。本文还对基体干扰及其消除进行了研究。     

电化学法测定几种稀土贮氢合金的热力学函数

贮氢材料由于能可逆地吸放氢,得到了广泛地应用.特别是以贮氢材料为负极制成的氢镍二次电池,容量为同类型镉镍电池的1.5～2倍,且电压又相近,是镉镍电池的理想换代产品,受到人们普遍的关注。LaNi_(4.5)Mn_(0.5),LaNi_(4.9)Sn_(0.1)和La_(0.8)Nd_(0.2)Ni_(2.5)Co_(2.4)Al_(0.1)是电化学性能较优越的贮氢合金。LaNi_(4.5)Mn_(0.5)的电化学容量高,理论容量可达400mAh.g~(-1).LaNi_(4.9)Sn_(0.1)和La_(0.8) Nd_(0.2)     

Synthesis and characterization of the non-Kekulé, singlet biradicaloid Ar'Ge(micro-NSiMe(3))(2)GeAr' (Ar' = 2,6-Dipp(2)C(6)H(3), Dipp = 2,6-i-Pr(2)C(6)H(3))

Reaction of Ar'GeGeAr' (1) with an excess of Me3SiN3 gives the non-Kekulé, biradicaloid Ar'Ge(mu-NSiMe3)2GeAr' (3, Ar' = 2,6-Dipp2C6H3, Dipp = 2,6-i-Pr2C6H3) which has a planar Ge2N2Si2 array and pyramidal geometry at the germaniums. DFT calculations for the model MeGe(mu-NSiH3)2GeMe indicate no Ge-Ge bonding and a singlet ground state. The calculated energy difference between the optimized singlet and triplet states is 17.51 kcal/mol.     

Cu（Ⅱ）—胱氨酸络合物吸附波的研究及蛋白质中胱氨酸的测定

研究了Cu(Ⅱ)-胱氨酸络合物极谱波的性质;提出了一种用示波极谱法测定蛋白质中胱氨酸的新方法,可在8.0×10~(-4)mol/L Cu~(2+)+8.0×10~(-3)mol/L三乙醇胺的溶液中测定0.05～20mg/L的胱氨酸。     

双质谱测定地卟啉取代基组成的解析方法及其应用

根据卟啉标样的双质谱特征，建立一种计算卟啉环上取代基组成的方法。卟啉的平均分子结构简式衡量其取代基的组成，尤其对地质体中相同碳数的卟啉“混合物”大环外取代基的构成十分有效。     

Effects of Calcination Temperature on the Acidity and Catalytic Performances of HZSM-5 Zeolite Catalysts for the Catalytic Cracking of n-Butane

The acidic modulations of a series of HZSM-5 catalysts were successfully made by calcination at different treatment temperatures, i.e. 500, 600, 650, 700 and 800 ℃, respectively. The results indicated that the total acid amounts, their density and the amount of B-type acid of HZSM-5 catalysts rapidly decreased, while the amounts of L-type acid had almost no change and thus the ratio of L/B was obviously enhanced with the increase of calcination temperature (excluding 800 ℃). The catalytic performances of modified HZSM-5 catalysts for the cracking of n-butane were also investigated. The main properties of these catalysts were characterized by means of XRD, N2 adsorption at low temperature, NH3-TPD, FTIR of pyridine adsorption and BET surface area measurements. The results showed that HZSM-5 zeolite pretreated at 800 ℃ had very low catalytic activity for n-butane cracking. In the calcination temperature range of 500-700 ℃, the total selectivity to olefins, propylene and butene were increased with the increase of calcination temperature, while, the selectivity for arene decreased with the calcination temperature.The HZSM-5 zeolite calcined at 700 ℃ produced light olefins with high yield, at the reaction temperature of 650 ℃ the yields of total olefins and ethylene were 52.8% and 29.4%, respectively. Besides, the more important role is that high calcination temperature treatment improved the duration stability of HZSM-5zeolites. The effect of calcination temperature on the physico-chemical properties and catalytic performance of HZSM-5 for cracking of n-butane was explored. It was found that the calcination temperature had large effects on the surface area, crystallinity and acid properties of HZSM-5 catalyst, which further affected the catalytic performance for n-butane cracking.