A new method for the synthesis of 1,3-oxathiolan-2-ones by the reaction of epoxides with sulfur and carbon monoxide

The convenient method for the synthesis of 1,3-oxathiolan-2-ones by the reaction of epoxides with elemental sulfur and carbon monoxide in the presence of catalytic amount of sodium hydride has been developed.     

Interpretation of structure formation during the sol-gel transition of a resorcinol-formaldehyde solution by population balance

Growth of colloidal particles formed during the sol-gel transition of a resorcinol-formaldehyde (RF) solution was simulated based on the population balance equation by using the discrete-sectional model (DSM). During the early stage of the sol-gel transition, the transient change of sizes of colloidal particles estimated by this method agreed well with the previous experimental observation by dynamic light scattering (DLS), which confirmed the influence of the catalyst concentration of a starting RF solution on the growth rate of the particles. From the size distribution of colloidal particles predicted at the gelation time, the surface area of a RF hydrogel after the completion of the sol-gel transition was estimated, which coincided with the BET surface area of a RF aerogel because the porous structure of a hydrogel was maintained and few micropores were formed during supercritical drying.     

Effects of antimony on the surface tension of molten silicon

The effect of antimony concentration (C(Sb)/mass%) on the surface tension of molten silicon has been determined with the sessile drop method in the temperature range from 1693 to 1773 K and in the range of the oxygen partial pressure, Po(2), in an Ar atmosphere from 10(-23) to 10(-21) MPa. The results show that the surface tension of molten silicon decreases with increasing Sb concentration in the range of C(Sb)<0.9 mass%, which indicates positive adsorption of Sb in molten silicon and can be fairly described with the Szyszkowski's equation. The maximum decrease rate of surface tension is about 65 mN m(-1) (mass% C(Sb))(-1), and the temperature coefficient of surface tension, (partial differential sigma/ partial differential T)C(Sb), increases with increasing C(Sb). The evaporation of the systems was only observed between the melting points of antimony (904 K) and silicon (1683 K), and the surface tension presents no dependence on measuring time above the melting point of silicon.     

Triethylborane as an efficient promoter for palladium-catalyzed allylation of active methylene compounds with allyl alcohols

Without prior activation of allyl alcohols, allylation of a variety of active methylene compounds with allyl alcohols proceeds smoothly at rt-50°C in the presence of catalytic amounts of Pd(OAc)₂ (1-10 mol%), Et₃B (30-240 mol%), a phosphine ligand (1-20 mol%), and a base (0 to 50-60 mol%).     

Determination of the double-bond position in hexadecenols by mass spectrometry without prior chemical modification

Fourteen isomers of chemically unmodified hexadecenol were analysed by two types of quadrupole mass spectrometer, coupled with a gas chromatograph, for the location of the double-bond position. A series of spectra were interpreted in terms of mass spectral patterns on a fuzzy classification, in which the intensity ratios of six diagnostic pairs of the predominant ions were preferred in devising similarity indices. The accuracy of the method in the location of double-bond position was confirmed by testing with other series of spectra.     

Immobilization of ultra-thin layer of monoclonal antibody on glass surface

When preparing an affinity column and a biosensor, it is desirable to immobilize a unimolecular layer of pure protein on a matrix. In this work, we tried to immobilize a monoclonal antibody on a surface of a glass test-tube as a model, to confirm the stability of this ultra-thin layer by an enzyme immunoassay, and to estimate the thickness of the layer on a slide glass by Fourier transform infrared reflection spectrometry. A new test-tube was washed and dried. The tube was filled with 5% 3-aminopropyltriethoxysilane. The 3-aminopropylsilylated surface was treated with glutaraldehyde and 5.6.10(-2) mg/ml solution of a normal mouse monoclonal antibody. The Schiff base between glutaraldehyde and the antibody was further reduced with 7.9.10(-3)% NaBH4. The tube was washed with 0.05% Tween 20 to block non-specific binding. The antibody immobilized on the surface was measured by an enzyme immunoassay based on a reaction of anti-mouse immunoglobulin G labelled with alkaline phosphatase, with which p-nitrophenol was produced from p-nitrophenylphosphate as a substrate. Meanwhile, various amounts of the antibody were immobilized on slide glasses in the same manner. The antibody on each surface was measured by Fourier transform infrared reflection spectrometry. The antibody immobilized under the final conditions was detectable by the enzyme immunoassay, and stable at 4 degrees C for ten days. The antibody on the slide glass was a unimolecular layer, as judged from the Fourier transform infrared spectra referred to -CONH- band semiquantitatively. Thus, we found the optimal conditions for immobilizing an ultra-thin layer of the monoclonal antibody on the glass surface.(ABSTRACT TRUNCATED AT 250 WORDS)     

Determination of methylarsenic compounds in airborne particulate matter by gas chromatography with atomic absorption spectrometry

A sensitive method is described for the determination of mono-, di- and tri-methylarsenic compounds in airborne particulate matter by hydride-generation and gas-liquid chromatography with atomic absorption spectrometric detection. Interferences of various species are discussed. Absolute detection limits are 70, 80 and 100 pg As, respectively for the mono-, di- and tri-methylarsenic species. Recoveries of methylarsenic compounds added to airborne particulate matter are almost 100%. An iron/nitrate mixture interfered strongly but this was overcome by adding EDTA.     

Finding of remarkable synergistic effect on the aroxyl-radical-scavenging rates under the coexistence of α-tocopherol and catechins

Measurements of aroxyl radical (ArO^•)-scavenging rate constants () of antioxidants (AOHs) (α-tocopherol (α-TocH) and three catechins (CatHs) (ie, epicatechin (EC), epigallocatechin (EGC), and epigallocatechin gallate (EGCG)) were performed in ethanol solution, using stopped-flow spectrophotometry. values were measured not only for each AOH, but also for the mixtures of two AOHs (α-TocH and CatH). A notable synergistic effect that the value of α-TocH increases 1.29, 1.84, and 1.65 times under the coexistence of constant concentrations of EC, EGC, and EGCG, respectively, was observed for the solutions including α-TocH and CatH. Similarly, values of CatHs (EC, EGC, and EGCG) increased 1.72, 2.25, and 2.34 times under the coexistence of constant concentrations of α-TocH, respectively. UV-Vis absorption of α-tocopheroxyl radical (α-Toc^•) (λ_max = 428 nm), which had been produced by reaction of α-TocH with ArO^•, decreased remarkably under the coexistence of α-TocH and CatHs due to the fast α-TocH-regeneration reaction by CatHs. The result suggests that the prooxidant reaction due to α-Toc^• is suppressed by the coexistence of CatHs. By analyzing the formation and decay curves of α-Toc^•, it has been ascertained that one molecule of EGCG having three OH groups at B-ring may rapidly regenerate three molecules of α-Toc^• to α-TocH.     

Evaluation of the adsorption affinity of proteins to calcium hydroxyapatites by desorption and pre-adsorption methods

The adsorption affinity of bovine serum albumin (BSA) and lysozyme (LSZ) to calcium hydroxyapatite (CaHAP) was evaluated by desorption and two step adsorption methods. These experiments were carried out at 15°C in a 1×10⁻⁴ mol dm⁻³ KCl solution of pH 6.0. BSA molecules were scarcely desorbed, exhibiting an irreversible adsorption of BSA, though LSZ slightly desorbed. This result supports our previous findings that LSZ adsorbs weakly onto phosphate ions exposed on ac or bc faces of CaHAP while BSA adsorbs strongly onto positively charged sites on ac or bc faces of CaHAP. The amount of adsorbed LSZ was markedly increased by the pre-adsorption of BSA, where LSZ was adsorbed onto BSA-covered CaHAP. On the other hand, the amount of adsorbed BSA was not changed by the pre-adsorption of LSZ. In both pre-adsorption systems it was confirmed by an HPLC method that no protein molecule pre-adsorbed was desorbed after the post-adsorption procedure. Therefore, it was interpreted that the enhancement of adsorption of positively charged LSZ is induced by an electrostatic attractive force through pre-adsorption of negatively charged BSA molecules with a high coverage. However, since the coverage of LSZ onto CaHAP is considerably low, no stimulation of BSA adsorption occurred on the LSZ-covered surface. The formation of double protein adsorbed layers consisting of pre- and post-adsorbed proteins was proposed.