New approach to development of phenolic thermopolymerization inhibitors for processing of pyrolysis products (by example of pyrocatechol)

New approach to processing of phenols to enable their use as thermopolymerization inhibitors of unsaturated components of pyrocondensates is suggested. The method consists in a mild thermal treatment of a mixture of phenol, solvent, and kraft terpentine. A treatment of this kind results in that any (un)substituted phenol acquires inhibiting properties that compare well with those of the best phenolic inhibitors.     

Numerical study of steady/unsteady flow and heat transfer in porous media using a characteristics-based matrix-free implicit FV method on unstructured grids

In this study, a high-resolution characteristic-based finite-volume (FV) method on unstructured grids [Int. J. Numer. Method Eng. 50 (2001) 11; Int. J. Heat Fluid Flow 21 (2000) 432] is extended by a matrix-free implicit dual-time stepping scheme for the numerical simulation of steady and unsteady flow and heat transfer with porous media. The method has been used to study the characteristics of a complex problem: flow and heat transfer in a channel with multiple discrete porous blocks, which was originally proposed by Huang and Vafai [J. Thermophys. Heat Transfer 8 (3) (1994) 563]. In addition, flow and heat transfer in a channel partially or fully filled with porous layers and containing solid protruding blocks with constant heat flux on its lower surface are also investigated in details. Hydrodynamic and heat transfer results are reported for both steady and transient flow cases. In particular, the effects of Darcy and Reynolds numbers on heat transfer augmentation and pressure loss are studied. An in-depth discussion of the formation and variation of recirculation is presented and the existence of optimum porous insert is demonstrated. At high Reynolds numbers the flow in the porous channel exhibits a cyclic characteristics although unlike the non-porous channel flow, the cyclic vortex development is only restricted to a small area behind the last solid block, while temperature changes more slowly and does not exhibit cyclic variations over a long period of time. It is shown that for all the cases studied altering some parametric values can have significant and interesting effects on both flow pattern as well as heat transfer characteristics.     

The diazo route to 2-vinylcyclopropylidenes

2-Vinylcyclopropylidene(2),3-methyl-2-vinylcyclopropylidenes(79,81)and2-(1-propenyl)cyclopropylidenes (95,97) were generated from the corresponding nitrosoureas in methanol at room temperature. The diazo route is initiated by the formation of 2-vinylcyclopropanediazonium ions (e.g.43) which do not undergo 1,3-carbon shifts. No cyclopentenyl products were found in weakly basic methanol where the diazonium ions prevail. Ring opening of the diazonium ions gives pentadienyl cations and products derived therefrom. Delocalisation of the pentadienyl cations was demonstrated by the distribution of deuterium and methyl labels. In the presence of strong base, 1-diazo-2-vinylcyclopropanes (e.g.48) arise by deprotonation of the diazonium ions. Rearrangement of 48 was excluded by independent generation of the potential product, 4-diazocyclopentene (103). Substantial quantities of 3-methoxycyclopentene (108) were obtained from 103, but not from 48. The 2-vinylcyclopropylidenes 2,79 and 95, arising by loss of nitrogen from the corresponding diazo compounds, undergo allene formation and Skattebøl rearrangement competitively. Cis-oriented methyl groups at either C-2(81) or C-2'(97) prevent the Skattebøl rearrangement. The cyclopentenylidenes 3 and 83 yield 4-methoxycyclopentenes (52,86) in excess over cyclopentadiens (4,84). In the presence of methyl vinyl ether, cycloaddition of 3 and electrophilic addition of 3-cyclopentenyl cation (51) occurred in a 1:14 ratio. Stereospecific formation of 52 indicates protonation of a ‘foiled carbene’ (3a) to give a bishomocyclopropenyl ion (51a). Our studies confirm that the various routes to 2-vinylcyclopropylidenes converge at the carbene stage.     

Irreversible structural transformation of Si(1 1 4)-2 × 1 induced by subsurface carbon

Using scanning tunneling microscopy (STM), it has been found that the reconstruction of Si(1 1 4) is transformed irreversibly from a 2 × 1 structure composed of dimer (D), rebonded atom (R), and tetramer (T) rows (phase A) to a different kind of 2 × 1 structure composed of D, T, and T rows (phase B) by C incorporation. It has been confirmed by high-resolution synchrotron core-level photoemission spectroscopy (PES) that such an irreversible structural transformation is due to stable subsurface C atoms. They induce anisotropic compressive stress on the surface, which results in insertion of Si dimers to an R row to form a T row.     

Strain-rate history effects and microstructural aspects in lithium fluoride and aluminium single crystals after dynamic loading

Single crystals of LiF and Al are deformed in shear at a number of constant strain-rates in the range 10^–4 to 1600 s^–1. These constant rate tests are supplemented by a series of jump tests in which a sharp increment in strain rate is imposed during the quasi-static straining. Dislocation arrangements are observed by etch-pits technique for LiF crystals and by TEM for Al crystals. It is shown that cell sizes vary inversely with flow stress and strain-rate sensitivity.     

A strong mixing condition for a homogeneous random field

For a homogeneous random field , one obtains a sufficient condition in order to have the relation.Translated from Zapiski Nauchnykh Seminarov Leningradskogo Otdeleniya Matematicheskogo Instituta im. V. A. Steklova AN SSSR, Vol. 130, pp. 167–174, 1983.In conclusion, I express my gratitude to I. A. Ibragimov for his help in the preparation of this paper.     

Protein separation and surfactant control of electroosmotic flow in poly(dimethylsiloxane)-coated capillaries and microchips

A thermally pyrolyzed poly(dimethylsiloxane) (PDMS) coating intended to prevent surface adsorption during capillary electrophoretic (CE) [Science 222 (1983) 266] separation of proteins, and to provide a substrate for surfactant adsorption for electroosmotic mobility control was prepared and evaluated. Coating fused-silica capillaries or glass microchip CE devices with a 1% solution of 100 cSt silicone oil in CH2Cl2, followed by forced N2 drying and thermal curing at 400 degrees C for 30 min produced a cross-linked PDMS layer. Addition of 0.01 to 0.02% Brij 35 to a 0.020 M phosphate buffer gave separations of lysozyme, cytochrome c, RNase, and fluorescein-labeled goat anti-human IgG Fab fragment. Respective plates/m typically obtained at 20 kV (740 V cm(-1)) were 2, 1.5, 1.25, and 9.4-10(5). In 50 mM ionic strength phosphate, 0.01% Brij 35 running buffer, the electroosmotic flow observed was about 25% of that in a bare capillary, and showed no pH dependence between pH 6.3-8.2. Addition of sodium dodecylsulfate (SDS) or cetyltrimethylammonium bromide (CTAB) to this running buffer allowed ready control of electroosmotic mobility, mu(eo). Concentrations of SDS between 0.005 to 0.1% resulted in mu(eo) ranging from 3 to 5 x 10(-4) cm2 V(-1) s(-1). Addition of 1 to 2.3 x 10(-4)% (2.7-6.3 microM) CTAB caused flow reversal. CTAB concentrations between 3.5 x 10(-4) and 0.05% (0.0014-1.37 mM) allowed control of mu(eo) between -1 x 10(-4) and -5.0 x 10(-4) cm2 V(-1) s(-1). For both surfactants the added presence of 0.01% Brij 35 provided slowly varying changes in mu(eo) with charged surfactant concentration.     

A Convenient Synthesis of 3-Alkylthiophenes

The known procedures for the synthesis of 3-alkylthiophenes are rather lengthy or involved. By using the NiDPPP⁺⁺ catalyzed cross-coupling method between 3-bromothiophene and Grignard reagents derived from alkyl halides a number of 3-alkylthiophenes have been prepared in a one-step reaction in good to excellent yields.     

Diffusion Studies on Polystyrene in 1,4-Dioxane

The diffusion behavior of polystyrene with narrow molecular weight distribution at 20℃ in 1, 4-dioxane was investigated by the photon correlation spectroscopy. The cumulant method was employed for the analysis of the intensity-intensity autocorrelation function measured over a wide range of the scattering vector. The diffusion coefficient D was determined as the function of concentration C in the molecular weight range of 3. 0×104-1. 20×106. In a low concentration range, D was found to be linearly dependent on C, which has been found for some other systems. The dependence of D on molecular weight at infinite dilution can be written as an empirical formula D0 = kDM-γ M, the exponent γ(0. 576 ±0. 01) is in good agreement with the result of the scaling theory.     

碳和硼的笼状原子簇及其关系

碳笼烯C_(60)的发现及碳笼烷C-(60)H_(60)的制备,激励人们去探索合成新的碳元素类似物和其它元素的类似物。本文利用碳和硼的笼型烷烃的化学键和几何特征,讨论碳和硼的笼状原子簇骨架的共轭关系,推导其中一些高对称化合物的原子数和几何结构,并讨论其稳定性。 1 碳和硼的笼状原子簇骨架的共轭关系