排序方式: 共有21条查询结果,搜索用时 15 毫秒
1.
Correa NM Zorzan DH D'Anteo L Lasta E Chiarini M Cerichelli G 《The Journal of organic chemistry》2004,69(24):8231-8238
Kinetics of the reduction of 3-chloroacetophenone (CAF) with sodium borohydride (NaBH(4)) were followed by UV-vis spectroscopy at 27.0 degrees C in different reverse micellar media, toluene/BHDC/water and toluene/AOT/water, and compared with results in an isooctane/AOT/water reverse micellar system. AOT is sodium 1,4-bis-2-ethylhexylsulfosuccinate, and BHDC is benzyl-n-hexadecyl dimethylammonium chloride. The kinetic profiles were investigated as a function of variables such as surfactant and NaBH(4) concentration and the amount of water dispersed in the reverse micelles, W(0) = [H(2)O]/[surfactant]. In all cases, the first-order rate constant, k(obs), increases with the concentration of surfactant as a consequence of incorporating the substrate into the interface of the reverse micelles where the reaction takes place. The reaction is faster at the cationic interface than at the anionic one probably because the negative ion BH(4)(-) is part of the cationic interface. The effect of the external solvent on the reaction shows that reduction is favored in the isooctane/AOT/water reverse micellar system than that with an aromatic solvent. This is probably due to BH(4)(-) being more in the water pool of the toluene/AOT/water reverse micellar system. The kinetic profile upon water addition depends largely on the type of interface. In the BHDC system, k(obs) increases with W(0) in the whole range studied while in AOT the kinetic profile has a maximum at W(0) approximately 5, probably reflecting the fact that BH(4)(-) is part of the cationic interface while, in the anionic one, there is a strong interaction between water and the polar headgroup of AOT below W(0) = 5 and, above that, BH(4)(-) is repelled from the interface once the water pool has formed. Application of a kinetic model based on the pseudophase formalism, which considers the distribution of the ketone between the continuous medium and the interface and assumes that reaction takes place only at the interface, has enabled us to estimate rate constants at the interface of the reverse micellar systems. At W(0) < 10, it was considered that NaBH(4) is wholly at the interface and, at W(0) >/= 10, where there are free water molecules, also the partitioning between the interface and the water pool was taken into account. The results were used to evaluate CAF and NaBH(4) distribution constants between the different pseudophases as well as the second-order reaction rate constant of the reduction reaction in the micellar interface. 相似文献
2.
[reaction: see text] The palladium-catalyzed arylation of the alpha-methylene-gamma-butyrolactone proceeds in good yields and may be directed toward the synthesis of 3-benzylfuran-2(5H)-ones when the starting aryl iodides contain strongly electron-withdrawing groups. The combined palladium-catalyzed arylation/hydrogenation of the alpha-methylene-gamma-butyrolactone represents a new simple entry into functionalized alpha-benzyl-gamma-butyrolactones. 相似文献
3.
Thereza Christina Vessoni Penna Eb Chiarini Adalberto Pessoa Junior 《Applied biochemistry and biotechnology》2003,107(1-3):481-491
Transformed cells of Escherichia coli expressing recombinant green fluorescent protein (GFPuv) were subjected to two methods of extraction: (1) freezing/thawing/sonication
(FTS) cycles prior to the three-phase partitioning (TPP) method, or (2) directly to TPP extraction. The amount of GFPuv released
by the FTS plus TPP method varied: 374μg/mL (first cycle), 93–442 μg/mL (second cycle), 32–359 μg/mL (third cycle), 18–115
μg/mL (fourth cycle). The GFPuv yields by the second method (TPP only) were, 23–54 μg/mL for the first extract and 33–91 μg/mL
for the second. The FTS plus TPP method released similar amounts of GFPuv to that extracted by TPP; and provided a better
mixture elution through the hydrophobic interaction column: 13–63 μg/mL for FTS plus TPP methods, and 2.5–13 μg/mL for TPP.
The results showed that although selective permeation is a more laborious methodology, it was more efficient for obtaining
of GFPuv in relation to the direct extraction of the cells for TPP. 相似文献
4.
De Maria P Fontana A Siani G D'Aurizio E Cerichelli G Chiarini M Angelini G Gasbarri C 《Colloids and surfaces. B, Biointerfaces》2011,87(1):73-78
The aggregation properties of a new sultaine surfactant have been studied in buffered aqueous solution at pH 7.4 under controlled condition of osmolarity. Spontaneously formed sultaine vesicles with a mean diameter of about 1 μm can be observed by optical microscopy. The phase behaviour of the surfactant has been investigated by differential scanning calorimetry (DSC) and Nile Red fluorescence. Two critical vesicular concentrations (CVC(1) and CVC(2)) have been fluorimetrically measured, by using pyrene and Nile Red as the fluorescent probes. The two populations of vesicles behave differently as a consequence of their size. The stability of extruded large unilamellar vesicles (LUV) formed slightly above the CVC(1) has been evaluated in the temperature range 25-75°C by following the rate of spontaneous release of entrapped 5(6)-carboxyfluorescein (CF). The stability of the same vesicles at 70°C has also been investigated under osmotic stress obtained by adding NaCl or sucrose to the bulk solution. At a sultaine concentration above the CVC(2) LUV tend to associate and form stable larger closely packed aggregates as suggested by Dynamic Laser Light Scattering and rheological measurements. 相似文献
5.
The reduction of three aromatic ketones, acetophenone (AF), 4-methoxyacetophenone (MAF), and 3-chloroacetophenone (CAF), by NaBH(4) was followed by UV-vis spectroscopy in reverse micellar systems of water/AOT/isooctane at 25.0 degrees C (AOT is sodium 1,4-bis-2-ethylhexylsulfosuccinate). The first-order rate constants, k(obs), increase with the concentration of surfactant due to the substrate incorporation at the reverse micelle interface, where the reaction occurs. For all the ketones the reactivity is lower at the micellar interface than in water, probably reflecting the low affinity of the anionic interface for BH(4)(-). Kinetic profiles upon water addition show maxima in k(obs) at W(0) approximately 5 probably reflecting a strong interaction between water and the ionic headgroup of AOT; at W(0) < 5 by increasing W(0) BH(4)(-) is repelled from the anionic interface once the water pool forms. The order of reactivity was CAF > AF > MAF. Application of a kinetic model based on the pseudophase formalism, which considers distribution of the ketones between the continuous medium and the interface, and assumes that reaction take place only at the interface, gives values of the rate constants at the interface of the reverse micellar system. At W(0) = 5, we conclude that NaBH(4) is wholly at the interface, and at W(0) = 10 and 15, where there are free water molecules, the partitioning between the interface and the water pool has to be considered. The results were used to estimate the ketone and borohydride distribution constants between the different pseudophases as well as the second-order reaction rate constant at the micellar interface. 相似文献
6.
Penna Thereza Christina Vessoni Chiarini Eb Machoshvili Irene Alexeevna Ishii Marina Pessoa Adalberto 《Applied biochemistry and biotechnology》2002,98(1-9):791-802
The recombinant green fluorescent protein (gfp
uv
) was expressed by Escherichia coli DH5-α cells transformed with the plasmid pGFPuv. The gfp
uv
was selectively permeabilized from the cells in buffer solution (25 mM Tris-HCl, pH 8.0), after freezing (−70°C for 15 h), by four freeze (−20°C)/thaw cycles interlaid by sonication. The average
content of released gfp
uv
(experiment 2) was 7.76, 34.58, 39.38, 12.90, and 5.38%, for the initial freezing (−70°C) and the first, second, third and
fourth freeze/thaw cycles, respectively. Superfusion on freezing was observed between −11°C and −14°C, after which it reached
−20°C at 0.83°C/min. 相似文献
7.
Paola Montanari Alberto Chiarini Roberta Budriesi Piero Valenti 《Journal of heterocyclic chemistry》1992,29(1):259-261
The xanthone analogues of milrinone have been prepared. The new compounds do not retain the inotropic activity of the parent compound. 相似文献
8.
Ammazzalorso A Amoroso R Bettoni G Chiarini M De Filippis B Fantacuzzi M Giampietro L Maccallini C Tricca ML 《Journal of chromatography. A》2005,1088(1-2):110-120
The enantiomeric separation of gemfibrozil chiral analogues was performed by capillary zone electrophoresis (CZE). Resolution of the enantiomers was achieved using heptakis(2,3,6-tri-O-methyl)-beta-cyclodextrin (TM-beta-CD) as chiral selector dissolved into a buffer solution. In order to optimize the separation conditions, type, pH and concentration of running buffer and chiral selector concentration were varied. For each pH value, the optimum chiral selector concentration that produced the resolution of the isomers was found. The migration order of labile diastereoisomers formed was valued at the optimum experimental conditions by adding a pure optical isomer to the racemic mixture. Data from 1H NMR studies confirmed host-guest interaction between TM-beta-CD and 5-(2,5-dimethylphenoxy)-2-ethylpentanoic acid sodium salt. The hypothesized stoichiometry host:guest was 1:1. An apparent equilibrium constant (Ka) was estimated monitoring the chemical shift variation as a function of TM-beta-CD concentration. Salt effect on complexation equilibrium constant was also investigated. 相似文献
9.
10.
Rossella Gottardo Anna Chiarini Ilaria Dal Prà Catia Seri Claudia Rimondo Giovanni Serpelloni Ubaldo Armato Franco Tagliaro 《Journal of mass spectrometry : JMS》2012,47(1):141-146
Since 2004, a number of herbal blends containing different synthetic compounds mimicking the pharmacological activity of cannabinoids and displaying a high toxicological potential have appeared in the market. Their availability is mainly based on the so‐called “e‐commerce”, being sold as legal alternatives to cannabis and cannabis derivatives. Although highly selective, sensitive, accurate, and quantitative methods based on GC–MS and LC–MS are available, they lack simplicity, rapidity, versatility and throughput, which are required for product monitoring. In this context, matrix‐assisted laser desorption ionization‐time of flight mass spectrometry (MALDI‐TOF MS) offers a simple and rapid operation with high throughput. Thus, the aim of the present work was to develop a MALDI‐TOF MS method for the rapid qualitative direct analysis of herbal blend preparations for synthetic cannabinoids to be used as front screening of confiscated clandestine preparations. The sample preparation was limited to herbal blend leaves finely grinding in a mortar and loading onto the MALDI plate followed by addition of 2 µl of the matrix/surfactant mixture [α‐cyano‐4‐hydroxy‐cinnamic acid/cetyltrimethylammonium bromide (CTAB)]. After drying, the sample plate was introduced into the ion source for analysis. MALDI‐TOF conditions were as follows: mass spectra were analyzed in the range m/z 150–550 by averaging the data from 50 laser shots and using an accelerating voltage of 20 kV. The described method was successfully applied to the screening of 31 commercial herbal blends, previously analyzed by GC–MS. Among the samples analyzed, 21 contained synthetic cannabinoids (namely JWH‐018, JWH‐073, JWH‐081, JWH‐250, JWH‐210, JWH‐019, and AM‐694). All the results were in agreement with GC–MS, which was used as the reference technique. Copyright © 2012 John Wiley & Sons, Ltd. 相似文献