Characterization and determination of linear alkylbenzenesulfonates in environmental water samples by high-performance liquid chromatography with a hydrophilic polymer column and electrospray ionization mass spectrometric detection.

A liquid chromatography-mass spectrometry (LC/MS) method was developed for the separation and determination of linear alkylbenzenesulfonates (C10-C14 LAS) in environmental water samples using a hydrophilic polymer column (Shodex Mspak GF-310 4D). This method involves a solid-phase extraction of the LAS samples with a Sep-Pak PS-2 cartridge. The LAS components were separated on the column with a mobile phase of 29% (w/v) acetonitrile-water containing 0.8 mM di-n-butylammonium acetate and 0.2 M acetic acid, and were detected by mass spectrometry with electrospray ionization. Detection limits of the developed method based on selected ion monitoring (SIM) technique for the C10-C14 LAS standards were 13-47 ng L(-1). The concentrations of the C10-C14 LAS in the environmental water samples ranged between 5-317 microg L(-1) for a river water sample and 0.4-6.4 microg L(-1) for a seawater sample. Linear relationships between the logarithms of retention factors and the alkyl chain lengths for each phenyl positional isomer of LAS could successfully be used for the identification of the isomer peaks.     

Synthesis and properties of polydiene and polypentenamer having formyl or hydroxymethyl groups and their photosensitive derivatives

cis-1,4-Polybutadiene and polypentenamer having pendant functional groups such as formyl, aldoxime, hydroxymethyl, or cinnamoyloxymethyl groups have been prepared, and some of their properties were investigated in terms of structural effect on physical properties of these polymers. cis-1, 4-Polybutadiene and polypentenamer having a different content of formyl group were prepared by the hydroformylation reaction with rhodium catalyst under mild conditions. The pendant formyl group was reduced to a hydroxymethyl group by using various reducing agents such as sodium borohydride or sodium trimethoxyborohydride which were effective to avoid a crosslinking reaction among the formyl groups. Glass transition temperature of polypentenamer having hydroxymethyl groups increased with increasing the content of the hydroxymethyl groups in the polymer. Cinnamoyl group was introduced into the polypentenamer having hydroxymethyl groups by reacting with cinnamoyl chloride so as to prepare a photosensitive rubber. The relationships between the photosensitivity of the cinnamoylated polypentenamer and the mobility of polymer main chains have been elucidated. A linear relationship between the photodimerization rate constant and the difference between ultraviolet (UV) irradiation temperature and the glass transition temperature of the polymer was found. It has become apparent that the photosensitivity of cinnamoylated polypentenamer can be estimated by the glass transition temperature of the original polymer, UV irradiation temperature, activation energy of the dimerization, and γ, which is a coefficient of the relationship between the photosensitive group concentration and the glass transition temperature of the polymer.     

Fluorogenic probes for detecting deacylase and demethylase activity towards post-translationally-modified lysine residues

Reversible enzymatic post-translational modification of the ε-amino groups of lysine residues (e.g. N-acylation reactions) plays an important role in regulating the cellular activities of numerous proteins. This study describes how enzyme catalyzed N-deprotection of lysine residues of non-fluorescent peptide-coumarin probes can be used to generate N-deprotected peptides that undergo spontaneous O- to N-ester transfer reactions (uncatalyzed) to generate a highly fluorescent N-carbamoyl peptide. This enables detection of enzyme catalyzed N-deacetylation, N-demalonylation, N-desuccinylation and N-demethylation reactions activities towards the N-modified lysine residues of these probes using simple ‘turn on’ fluorescent assays.

We developed “turn-on” fluorescent probes that detect enzymatic lysine deacylation and demethylation critical for epigenetic and other cellular phenomena, using intramolecular O- to N-ester transfer reactions.     

Electrochemical characterization of negative electrodes consisting of surface-modified Zr0.9Ti0.1(Ni1.1Co0.1Mn0.5V0.2Cr0.1)x Laves-phase alloys

Laves-phase hydrogen storage alloy has a high potential for use as negative electrode material as alternative for the misch-metal-based material. In order to improve the energy density and the rate capability of negative electrode, chemical and mechanical modification of Lavesphase alloy with different stoichiometric ratios was carried out. Discharge capacity and high-rate dischargeabilty was evaluated by electrochemical methods and the characterization of Laves-phase alloy was made by X-ray diffraction, SEM observation and PCT measurement. The best result in discharge capacity could be obtained for stoichiometric Laves-phase alloy with a composition of Zr_0.9Ti_0.1Ni_1.1Co_0.1Mn_0.5V_0.2Cr_0.1 by boiling in 10 M KOH solution. On the other hand, the high-rate dischargeability was increased remarkably by introducing mechanical grinding before alkali treatment. The cause for improved performance was discussed on the basis of thermodynamic stability of metal hydride and changes in crystal structure and surface morphology influencing on diffusion coefficient and diffusion path length of hydrogen.     

Photophysical and (photo)electrochemical properties of a coumarin dye

A new coumarin dye, cyano-{5,5-dimethyl-3-[2-(1,1,6,6-tetramethyl-10-oxo-2,3,5,6-tetrahydro-1H,4H,10H-11-oxa-3a-aza-benzo[de]anthracen-9-yl)vinyl]cyclohex-2-enylidene}-acetic acid (NKX-2753), was prepared and characterized with respect to photophysical and electrochemical properties. It was employed as a dye sensitizer in dye-sensitized solar cells and showed efficient photon-to-electron conversion properties. The photocurrent action spectrum exhibited a broad feature with a maximum incident photon-to-electron conversion efficiency (IPCE) of 84% at 540 nm, which is comparable to that for the famous red dye RuL2(NCS)2 (known as N3), where L stands for 2,2'-bipyridyl-4,4'-dicarboxylic acid. The sandwich-type solar cell with NKX-2753, under illumination of full sun (AM1.5, 100 mW cm(-2)), produced 16.1 mA cm(-2) of short-circuit photocurrent, 0.60 V of open-circuit photovoltage, and 0.69 of fill factor, corresponding to 6.7% of overall energy conversion efficiency using 0.1 M LiI, 0.05 M I2, 0.1 M guanidinium thiocyanate, and 0.6 M 1,2-dimethyl-3-n-propyl-imidazolium iodide in dry acetonitrile as redox electrolyte. In comparison with its analogue NKX-2586 (Langmuir 2004, 20, 4205), NKX-2753 with an extra side ring on the alkene chain produced much higher IPCE values at the same conditions. The side ring acted as a spacer to efficiently prevent dye aggregation when adsorbed on the TiO2 surface, resulting in significant improvements of short-circuit photocurrent, open-circuit photovoltage, and fill factor compared with NKX-2586 that aggregated on the TiO2 surface.     

Substrate dependence in aqueous Diels-Alder reactions of cyclohexadiene derivatives with 1,4-benzoquinone

A reactivity difference based on the position of substituents on cyclohexa-1,3- diene was observed for the title reaction. The effect of water as solvent was more distinct for 1-methyl-4-isopropylcyclohexa-1,3-diene than for 2-methyl-5-isopropylcyclohexa- 1,3-diene or non-substituted cyclohexa-1,3-diene. The effect of NaCl (salting-out) and guanidium chloride (salting-in) was also large for 1-methyl-4-isopropylcyclohexa-1,3- diene.     

Profiling analysis of oligosaccharides in antibody pharmaceuticals by capillary electrophoresis

Carbohydrate chains in glycoprotein pharmaceuticals have important roles for the expression of their biological activities. Therefore, development of an assessment method for the carbohydrate chains is an important parameter for quality control of glycoprotein pharmaceuticals such as newly developed therapeutic antibodies. In this report, we applied capillary electrophoresis with laser-induced fluorescence detection to the analysis of carbohydrate chains after releasing with glycoamidase followed by derivatization with 3-aminobenzoic acid. We found that four major oligosaccharides present in antibody pharmaceuticals were successfully separated with good resolution. The present method showed good precision in both migration times and relative peak areas, and gave comparable accuracy with that using a derivatization method with 8-aminopyrene-1,3,6-trisulfonate.     

Development of a fluoride-responsive amide bond cleavage device that is potentially applicable to a traceable linker

A fluoride-responsive (FR) amino acid that induces amide bond cleavage upon the addition of a fluoride was developed, and it was applied to an FR traceable linker. By the use of an alkyne-containing peptide as a model of an alkynylated target protein of a bioactive compound, introduction of the FR traceable linker onto the peptide was achieved. Subsequent fluoride-induced cleavage of the linker followed by labeling of the released peptide derivative was also conducted to examine the potential applicability of the FR traceable linker to the enrichment and labeling of alkynylated target molecules.     

An “OFF–ON–OFF” fluorescence protein-labeling probe for real-time visualization of the degradation of short-lived proteins in cellular systems

The ability to monitor proteolytic pathways that remove unwanted and damaged proteins from cells is essential for understanding the multiple processes used to maintain cellular homeostasis. In this study, we have developed a new protein-labeling probe that employs an ‘OFF–ON–OFF’ fluorescence switch to enable real-time imaging of the expression (fluorescence ON) and degradation (fluorescence OFF) of PYP-tagged protein constructs in living cells. Fluorescence switching is modulated by intramolecular contact quenching interactions in the unbound probe (fluorescence OFF) being disrupted upon binding to the PYP-tag protein, which turns fluorescence ON. Quenching is then restored when the PYP-tag–probe complex undergoes proteolytic degradation, which results in fluorescence being turned OFF. Optimization of probe structures and PYP-tag mutants has enabled this fast reacting ‘OFF–ON–OFF’ probe to be used to fluorescently image the expression and degradation of short-lived proteins.

An “OFF–ON–OFF” fluorescence probe for real-time imaging of the expression (fluorescence ‘OFF’) and degradation (fluorescence ‘ON’) of short lived PYP-tag proteins in cellular systems.