Functional Groups Assisted Tunable Dielectric Permittivity of Guest-Free Zn-Based Coordination Polymers for Gate Dielectrics

The dielectric properties of coordination polymers has been a topic of recent interest, but the role of different functional groups on the dielectric properties of these polymers has not yet been fully addressed. Herein, the effects of electron-donating (R=NH₂) and electron-withdrawing (R=NO₂) groups on the dielectric behavior of such materials were investigated for two thermally stable and guest-free Zn-based coordination polymers, [Zn(L₁)(L₂)]_n ( 1 ) and [Zn(L₁)(L₃)]_n ( 2 ) [L₁=2-(2-pyridyl) benzimidazole (Pbim), L₂=5-aminoisophthalate (Aip), and L₃=5-nitroisophthalate (Nip)]. The results of dielectric studies of 1 revealed that it possesses a high dielectric constant (κ=65.5 at 1 kHz), while compound 2 displayed an even higher dielectric constant (κ=110.3 at 1 kHz). The electron donating and withdrawing effects of the NH₂ and NO₂ substituents induce changes in the polarity of the polymers, which is due to the inductive effect from the aryl ring for both NO₂ and NH₂. Theoretical results from density functional theory (DFT) calculations, which also support the experimental findings, show that both compounds have a distinct electronic behavior with diverse wide bandgaps. The significance of the current work is to provide information about the structure-dielectric property relationships. So, this study promises to pave the way for further research on the effects of different functional groups on coordination polymers on their dielectric properties.     

Miscibility of bisphenol-A polycarbonate with poly(methyl methacrylate)

The miscibility of bisphenol-A polycarbonate (PC) with poly(methyl methacrylate) (PMMA) has been reexamined using differential scanning calorimetry (DSC) and optical indications for phase separation on heating, i.e., lower critical solution temperature (LCST) behavior. Various methods have been used to prepare the blends including methylene chloride (CH₂Cl₂) and tetrahydrofuran (THF) solution casting, melt mixing, and precipitation of PC and PMMA simultaneously from THF solution by using the nonsolvents methanol and heptane. It is shown that the resulting phase behavior for PC/PMMA blends is strongly affected by the blend preparation method. However, these blends are miscible over the whole blend composition range (unambiguous single composition-dependent T_g's and LCST behavior) when prepared by precipitation from solution using heptane as the nonsolvent. To the contrary, solution-cast and melt-mixed PC/PMMA blends were all phase separated, which may be attributed to the “solvent” effect and LCST behavior, respectively, not discovered in previous reports. Methanol precipitation does not lead to fully mixed blends, which demonstrates the importance of the choice of nonsolvent when using the precipitation method.     

Effect of oxygen exposure on the magnetic properties of ultrathin Co/Ge(1 1 1) films

Influences of oxygen exposure on the magnetic properties of Co/Ge(1 1 1) ultrathin films have been investigated by surface magneto-optic Kerr effect technique. As the oxygen exposure increases on Co/Ge(1 1 1) films, their magnetic properties could be modified. As an example for 15 ML Co/Ge(1 1 1) films, the coercivity increases from 730 to 920 Oe and the remanence Kerr intensity is reduced for 500 Langmuir (L) of oxygen exposure. Corresponding compositions analyzed by Auger electron spectroscopy measurement shows that the amount of oxygen on the surface layers increases with increasing the oxygen exposure time. Oxygen distributes on the topmost layers of the film. The adsorbed oxygen influences the electronic density of states of Co and results in the changes of the magnetic properties. Besides, the appearance of O/Co/Ge interface could modify the stress anisotropy, and as a result the coercivity of ultrathin Co/Ge(1 1 1) film is enhanced.     

SSIMS analysis of organics, polymer blends and interfaces

This paper gives a critical review on the applications of ToF SIMS in the areas of polymer additive characterization and in the study of polymer blends and interfaces. Polymer additives can readily be identified by ToF SIMS using their parent molecular ions or characteristic fragments. This analytical capability has been successfully applied to monitor the migration or segregation of additives during polymer processing. ToF SIMS is an ideal analytical tool for the study of polymer blends and interfaces because it is able to provide information on both surface composition and morphology. In combination with other analytical techniques such as AFM and XPS, ToF SIMS chemical imaging capability has opened up new horizons in the investigation of complex polymer blend systems. Finally the main advantages and limitations of ToF SIMS in these application areas are also discussed.     

Rapid Protein Hydrolysis by Microwave Irradiation Using Heat-Resistant Teflon-Pyrex Tubes

A rapid peptide-bond hydrolysis by means of microwave irradiation is introduced for the facile preparation of protein hydrolysates used for amino acid analysis. The optimal hydrolysis condition has been determined using several enzymes with known amino acid compositions. The effects of hydrolysis time on the recovery of various labile and hydrophobic amino acids are also exemplified in the microwave heating of standard amino acids. The method has been applied to the complete amino acid analysis with a single nonvolatile solvent of methanesulfonic acid with good recovery of tryptophan and half-cystine. It provides a radical expedition of protein and peptide hydrolysis via commercial microwave ovens and specially-designed Teflon-Pyrex tubes, circumventing the tedious procedures using vacuum-sealed pyrex lubes heating at 110°C for more than 24 h. This novel type of microwave chemistry associated with rapid peptide-bond cleavage is of great potential in the automation of the complete process of amino acid analysis starting from the preparation of protein hydrolysates.     

An Efficient and High‐Yield One‐Pot Synthesis of Bis(oxazoline)s

An efficient and mild one‐pot synthesis of bis(oxazoline) (BOX) ligands is developed from reactions of dicarboxy dichlorides with β‐amino alcohols in the presence of 11.0 equiv. NEt₃ followed by the addition of 3.6 equiv. methanesulfonyl chloride (MsCl). Nine different BOX ligands were prepared in excellent yields of ≥ 80%. Advantages of this improved synthesis are mild reaction conditions, short total reaction time of 9 h, and high isolated yields.     

Synthesis of 2-Oxo amide triacylglycerol analogues and study of their inhibition effect on pancreatic and gastric lipases

A general method for the synthesis of chiral 2-oxo amide triacylglycerol analogues, from (R)- or (S)-3-aminopropane-1,2-diol, was developed. These novel inhibitors of digestive lipases are analogues of the triacylglycerol molecule, a natural substrate of lipases, and they were designed to contain the 2-oxo amide functionality in place of the scissile ester bond at the sn-1 or sn-3 position and nonhydrolysable ether bonds instead of ester bonds at the other two remaining positions. The 2-oxo amide derivatives synthesised were tested for their ability to form stable monomolecular films at the air/water interface by recording their surface pressure/molecular area compression isotherms. The inhibition of porcine pancreatic and human gastric lipases by the 2-oxo amides was studied by means of the monolayer technique with mixed films of 1,2-dicaprin and with variable proportions of each inhibitor. The alpha50 values of these triacylglycerol analogues for PPL and HGL varied between 4.4 to 7.0% and 5.6 to 15.9%, respectively. The chirality at the sn-2 position of 2-oxo amide triacylglycerol analogues affected the alpha50 value for HGL, but not for PPL.     

Structure determination of homoleptic AuI, AgI, and CuI aryl/alkylethynyl coordination polymers by X-ray powder diffraction

This article describes the structure determination of five homoleptic d(10) metal-aryl/alkylacetylides [RC triple bond CM] (M=Cu, R=tBu 1, nPr 2, Ph 3; R=Ph, M=Ag 4; Au 5) by using X-ray single-crystal and powder diffraction. Complex 1.C6H6 reveals an unusual Cu20 catenane cluster structure that has various types of tBuC triple bond C-->Cu coordination modes. By using this single-crystal structure as a starting model for subsequent Rietveld refinement of X-ray powder diffraction data, the structure of the powder synthesized from CuI and tBuC triple bond CH was found to have the same structure as 1. Complex 2 has an extended sheet structure consisting of discrete zig-zag Cu4 subunits connected through bridging nPrC triple bond C groups. Complex 3 forms an infinite chain structure with extended Cu-Cu ladders (Cu-Cu=2.49(4)-2.83(2) A). The silver(I) congener 4 is iso-structural to 3 (average Ag-Ag distance 3.11 A), whereas the gold(I) analogue 5 forms a Au...Au honeycomb network with PhC triple bond C pillars (Au-Au=2.98(1)-3.26(1) A). Solid-state properties including photoluminescence, nu(C triple bond C) stretching frequencies and thermal stability of these polymeric systems are discussed in the context of the determined structures.     

Modification of silicon AFM cantilever tips with an oligo(ethylene glycol) derivative for resisting proteins and maintaining a small tip size for high-resolution imaging

We demonstrate that silicon AFM tips can be modified by etching with 2% HF solution followed by reaction with an alpha,omega-oligo(ethylene glycol)alkene. Tips properly modified by this technique maintain a small tip size and effectively reduce the nonspecific interaction with fibrinogen and bovine serum albumin, resulting in greatly improved image resolution and contrast for high-coverage fibrinogen films.