Evaluation of Polycation-Stabilized Lactate Oxidase in a Silica Sol–Gel as a Biosensor Platform

 Whereas glucose oxidase and related proteins are encapsulated readily in silica sol–gels, α-hydroxy enzymes such as lactate oxidase (LOx), are reported to be damaged by electrostatic interaction with these matrices. Based on a previous report, poly(ethyleneimine), PEI, was evaluated as a protecting compound under conditions suited to analytical measurements. With LOx and PEI co-encapsulated in a silica sol–gel, the enzyme retained 62% of its initial activity after 20 days. In the absence of PEI, activity was lost during the processing. Batch analytical measurements with enzyme-doped sol–gel yielded a linear response over the range 0.5–2.0 mM lactate and a detection limit of 0.03 mM lactate. Both simple incorporation of LOx in a silica sol–gel and an alternative protection method, blocking the ion-exchange sites on silica with La(III), failed. These negative results supported the hypothesis that the efficacy of PEI was related to its formation of a protective sheath around the enzyme. Author for correspondence. E-mail: coxja@muohio.edu Received July 29, 2002; accepted December 15, 2002 Published online May 19, 2003     

Generic serial and parallel on-line direct-injection using turbulent flow liquid chromatography/tandem mass spectrometry

The development of turbulent flow chromatography (TFC) has enabled considerable growth in the utility of on-line direct-injection technologies. TFC has now become established in a large number of varied analytical environments, particularly drug discovery/pharmacokinetics, metabolite profiling, combinatorial library purification, pre-clinical and clinical GLP applications. The utility of turbulent flow technology for in-house pre-clinical and clinical quantitative applications has necessitated extensive valve-cleaning procedures, and consequently lengthy cycle-times, to effectively remove the system carry-over. In-house requirements for assay validation require carry-over less than 20% of the lowest level of quantification (LLOQ), corresponding to 0.02% carry-over for a linear calibration range incorporating 3 orders. A generic turbulent flow chromatography protocol has been developed for drug discovery that incorporates polymeric turbulent flow extraction (cyclone) with C18-based reverse-phase chromatography. Further, multiple wash steps are incorporated within the methodology to meet in-house requirements for carry-over. Selection of novel switching-valve materials based on polyarylethyl ketone (PAEK) and Hastelloy/Valcon E autosampler injection hardware has enabled us to significantly impact the cycle-time required to reduce carry-over. Consequently, optimal usage of switching valves has enabled parallel operation for a generic on-line direct-injection methodology to successfully reduce the total cycle-time. Overall reductions from 4 min per sample to 90 s per sample are shown with comparable data quality using a proprietary target molecule from 0.1-100 ng/mL. This paper describes the hardware configuration and methodologies utilized to perform generic serial and parallel on-line direct-injection using a Turboflow HTLC 2300 system.     

Analysis of the terphenyls by a compressed pellet infrared method involving micro-distillation

A quantitative compressed pellet infrared method used together with a micro-distillation to effect separation of the isomer has been developed and reported here for the analysis of ortho-, meta-, and para-terphonyl. The terphenyl content is determined on fractions isolated by distillation from radiation damaged samples. The compressed pellet infrared method is preferred instead of the more conventional solution technique since smaller quantities of isolated terphcnyl are required. The pellet method is applicable also to polyphenyls higher than the terphenyls. The solution technique is not due to the insolubility of the polyphenyls. It is expected that the compressed pellet spectral method developed here might well find application in the analysis of compounds other than polyphenyls. Results presented here appear to be the, first quantitative infrared data reported in the literaturu on polyphenyl compounds.     

Interannular communication in the radical anions of bis-cyclooctatetraene systems

[reaction: see text] The room-temperature potassium reduction of 1,2-bis-cyclooctatetraeneoxypropane yields two different regio-spin isomer anion radicals in equilibrium (COT-O-C(Me)HCH(2)CH(2)-O-COT(*)(-) = (*)(-)COT-O-C(Me)HCH(2)CH(2)-O-COT) that is shifted far to the right. The presence of the unreduced ring perturbs the spin density on the reduced ring. Addition of more electrons generates the diradical dianion ((*)(-)COT-O-C(Me)HCH(2)CH(2)-O-COT(*)(-)), and the anion radical on the secondary side splits the degeneracy of the psuedo-ortho protons of the anion radical on the primary side.     

Orientational ordering of 4-substituted phenylcyclohexanes studied by carbon-13 two-dimensional N.M.R.

Abstract

An N.M.R. method combining the techniques of separated local field spectroscopy (SLF) and variable angle spinning (VAS) is valuable in the investigtion of nematic liquid crystals. Rapid sample spinning causes the nematic director to align along the spinning axis, resulting in narrow peaks in the C-13 N.M.R. spectrum. SLF is a two-dimensional N.M.R. method which produces a first order splitting pattern for each carbon signal from which C–H dipolar coupling constants can be determined. The order parameters for all segments of the liquid crystal molecule can then be calculated. Results for three 4′-cyanophenylcyclohexanes are considered here. These compounds are trans-substituted at the 4 position of cyclohexane ring with n-pentane (PCH5), 1-pentene (3d ₁CP) and 3-pentene (1d ₃CP), respectively.     

Integration of quantitative DCE-MRI and ADC mapping to monitor treatment response in human breast cancer: initial results

PURPOSE: The objective of this study was to assess changes in the water apparent diffusion coefficient (ADC) and in pharmacokinetic parameters obtained from the fast-exchange regime (FXR) modeling of dynamic contrast-enhanced magnetic resonance imaging (DCE-MRI) during neoadjuvant chemotherapy in breast cancer. MATERIALS AND METHODS: Eleven patients with locally advanced breast cancer underwent MRI examination prior to and after chemotherapy but prior to surgery. A 1.5-T scanner was used to obtain T1, ADC and DCE-MRI data. DCE-MRI data were analyzed by the FXR model returning estimates of K(trans) (volume transfer constant), v(e) (extravascular extracellular volume fraction) and tau(i) (average intracellular water lifetime). Histogram and correlation analyses assessed parameter changes post-treatment. RESULTS: Significant (P < .05) changes or trends towards significance (P < .10) were seen in all parameters except tau(i), although there was qualitative reduction in tau(i) values post-treatment. In particular, there was reduction (P < .035) in voxels with K(trans) values in the range 0.2-0.5 min(-1) and a decrease (P < .05) in voxels with ADC values in the range 0.99 x 10(-3) to 1.35 x 10(-3) mm2/s. ADC and v(e) were negatively correlated (r = -.60, P < .02). Parameters sensitive to water distribution and geometry (T(1), v(e), tau(i) and ADC) correlated with a multivariable linear regression model. CONCLUSION: The analysis presented here is sensitive to longitudinal changes in breast tumor status; K(trans) and ADC are most sensitive to these changes. Relationships between parameters provide information on water distribution and geometry in the tumor environment.     

The acquisition of new technology and its impact on a firm's competitive position

The strategic decision concerning the optimal and dynamic acquisition of new technology is examined. The model focuses on a profit maximizing firm that optimally derives its price, level of output, and its level and composition of productive capacity over time. The acquisition of new technology and reduction of existing capacity may occur simultaneously, so that the composition of the firm's productive resources may be upgraded over time. It is assumed that the acquisition of new technology causes a reduction in production costs and a direct increase in the firm's demand. The demand experienced by the firm may be directly increased as a result of acquiring new technology due to benefits such as expanded product-mix or volume capabilities, improved quality of output, or improved customer service (shorter production lead time). In addition, it is shown that demand is indirectly increased due to the reduced production costs that enable the firm to charge a lower price. Therefore, the strategic impact of acquiring new technology is captured, since its effect on future demand and the firm's ability to meet the demand are considered. The importance of capturing the increased demand potential offered by the new technology is demonstrated through the analysis of numerical examples. In addition, the effect on the optimal solution caused by a variety of environmental conditions is examined. For example, the impact of technological innovation is observed by defining (i) the cost of acquiring technology as a decreasing function of time, and (ii) the effectiveness of new technology on reducing operating costs as an increasing function of time.     

Effect of deviation from plane wave conditions on the Doppler spectrum from an ultrasonic blood flow detector.

Deviation from plane wave conditions within the ultrasound beam of a Doppler blood flow detector leads to a non-linear relationship between the phase angle of the back-scattered signal and the scatterer position. This in turn leads to frequency modulation of the Doppler signal and an increase in the Doppler spectrum width. The relationship between the ultrasound beam and the observed signal spectrum has been investigated by employing a computer-based model of the ultrasound field which enabled the calculation of: 1, pressure (amplitude and phase angle) field distributions from plane disc and focused transducers with unapodized and apodized aperture field distributions; 2, the Doppler signal from a scatterer moving through the field; and 3, the spectrum of this signal. The increase in spectral width resulting from deviations from plane wave conditions was calculated by comparing this spectrum with that of the signal from which frequency modulation had been removed.     

Two‐sided Group Digraphs and Graphs

We study a family of digraphs (directed graphs) that generalises the class of Cayley digraphs. For nonempty subsets of a group G, we define the two‐sided group digraph to have vertex set G, and an arc from x to y if and only if for some and . In common with Cayley graphs and digraphs, two‐sided group digraphs may be useful to model networks as the same routing and communication scheme can be implemented at each vertex. We determine necessary and sufficient conditions on L and R under which may be viewed as a simple graph of valency , and we call such graphs two‐sided group graphs. We also give sufficient conditions for two‐sided group digraphs to be connected, vertex‐transitive, or Cayley graphs. Several open problems are posed. Many examples are given, including one on 12 vertices with connected components of sizes 4 and 8.