Kinetic evidence of a common mechanism in the oxidations of diethyl sulfide by dichromates and halochromates of heterocyclic bases

The oxidations of diethyl sulfide by potassium dichromate, pyridinium dichromate, quinolinium dichromate, imidazolium dichromate, nicotinium dichromate, isonicotinium dichromate, pyridinium fluorochromate, quinolinium fluorochromate, imidazolium fluorochromate, pyridinium chlorochromate, quinolinium chlorochromate, and pyridinium bromochromate follow identical kinetic orders—first‐order each with respect to the chromium(VI) reagents, sulfide and hydrogen ion, and moderately inhibited by manganese(II) ion. The energy of activation varies linearly with the logarithm of frequency factor and so does the enthalpy of activation with the entropy of activation. Also, the activation free energies do not differ significantly. The dichromates and halochromates of heterocyclic bases oxidize diethyl sulfide via a common mechanism. © 2002 Wiley Periodicals, Inc. Int J Chem Kinet 35: 1–8, 2003     

Photon interaction studies using 241Am γ-rays

We have carried out some photon interaction measurements using 59.54 keV γ-rays from a ²⁴¹Am source. These include γ attenuation studies as well as photoelectric absorption studies in various samples. The attenuation studies have been made using leaf and wood samples, samples like sand, sugar etc., which contain particles of varying sizes as well as pellets and aqueous solutions of rare earth compounds. In the case of the leaf and wood samples, we have used the γ-ray attenuation technique for the determination of the water content in fresh and dried samples. The variation of the attenuation coefficient with particle size has been investigated for sand and sugar samples. The attenuation studies as well as the photoelectric studies in the case of rare earth elements have been carried out on samples containing such elements whose K-absorption edge energies lie below and close to the γ-energy used. Suitable compounds of the rare earth elements have been chosen as mixture absorbers in these investigations. A narrow beam good geometry set-up was used for the attenuation measurements. A well-shielded scattering geometry was used for the photoelectric measurements. The mixture rule was invoked to extract the values of the mass attenuation coefficients for the elements from those of the corresponding compounds. The results are consistent with theoretical values derived from the XCOM package.     

Using fluorescence resonance energy transfer to measure distances along individual DNA molecules: corrections due to nonideal transfer

Single molecule fluorescence resonance energy transfer has been extensively used to measure distance changes and kinetics in various biomolecular systems. However, due to complications involving multiple de-excitation pathways of the dyes, the absolute inter-dye distance information has seldom been recovered. To circumvent this we directly probe the relative variations in the quantum yield of individual fluorophores. B-DNA was used as a scaffold to position the donor (Cy3 or TMR) at precise distances from the acceptor (Cy5) within the Forster radius. We found that the variation in the Cy3 quantum yield is approximately 5 times larger than that of TMR. By taking into account the molecule-to-molecule variability in the acceptor/donor quantum yield ratio, the apparent fluorescence resonance energy transfer efficiencies were scaled to yield the theoretical values. We obtained very good agreement with a physical model that predicts distances along B-DNA.     

Enhancement of dielectric and electro-optical parameters of a newly prepared ferroelectric liquid crystal mixture by dispersing nano-sized copper oxide

ABSTRACT

Here, we present the effect of copper (II) oxide nanoparticles (nCuO) on dielectric and electro-optical parameters of a newly prepared ferroelectric liquid crystal (FLC) mixture, namely W302. The FLC mixture, comprising of pyrimidine compounds, was characterised through dielectric spectroscopy, differential scanning calorimetry (DSC), polarising optical microscopy (POM) and other electro-optical methods. The material parameters such as spontaneous polarisation, rotational viscosity, response time and tilt angle of W302 were found to be 14 nC/cm², 240 mPa.s, 150 µs and 28^?, respectively. The phase transition temperatures of W302 were observed through DSC and further confirmed by the dependence of dielectric loss factor in homogeneously aligned FLC sample with temperature. We also demonstrate the observance of a low-frequency dielectric relaxation mode due to the unwinding of the helix, called as partially unwound helical mode (p-UHM) along with Goldstone mode. The behaviour of p-UHM has been systematically studied with temperature and applied bias field. Further, dispersion of nCuO into host W302 has shown a significant increase in dielectric permittivity. Also, the p-UHM relaxation peak in the dielectric regime has disappeared with the incorporation of nCuO. These studies would be useful to fabricate better electro-optical devices for display, switching and beam steering applications. The formulation and characterization of a ferroelectric liquid crystal (FLC) mixture W302 composed of pyrimidine compounds is presented. Then, we observed the effect of copper (II) oxide nanoparticles (nCuO) on dielectric and electro-optical parameters of a newly prepared and characterized FLC mixture.     

Kinetics and mechanism of oxidation of allyl alcohol byN-bromosuccinimide

The kinetics of oxidation of allyl alcohol byN-bromosuccinimide (NBS) has been studied at 35 °C in aqueous medium. The reaction shows first order dependence on bothNBS and allyl alcohol. In fairly high acid concentration, there is no change in the rate of the reaction but at low acid concentration, the rate is considerably enhanced. There is no primary salt effect. At varying mercuric acetate concentrations, the rate constant remains the same. But in the absence of mercuric acetate, the rate is enhanced. The kinetic parameters,E _a,Arrhenius factorA, H, G and S have been calculated. A rate law in agreement with experimental results has been derived. A mechanism is proposed.

---

Kinetik und Mechanismus der Oxidation von Allylalkohol mixN-Bromsuccinimid

Zusammenfassung Die Kinetik der Oxidation von Allylalkohol mitN-Bromsuccinimid (NBS) wurde bei 35 °C in wäßrigem Medium untersucht. Die Reaktion zeigt erste Ordnung gegenüberNBS und Allylalkohol. Bei relativ hoher Säurekonzentration zeigt sich keine Änderung der Reaktionsgeschwindigkeit, bei niedriger Säurekonzentration wird die Reaktionsgeschwindigkeit beträchtlich erhöht. Es wurde kein primärer Salzeffekt festgestellt. Bei varriierender Quecksilberacetatkonzentration bleibt die Reaktionsgeschwindigkeit gleich, bei Abwesenheit von Quecksilberacetat wird jedoch die Geschwindigkeitskonstante erhöht. Die kinetischen Parameter,E _a, derArrheniusfaktorA, H , G und S wurden bestimmt. Ein Geschwindigkeitsgesetz in Übereinstimmung mit den experimentellen Befunden wurde abgeleitet und ein Mechanismus vorgeschlagen.

     

Enantioselective LC‐ESI‐MS/MS determination of dropropizine enantiomers in rat plasma and application to a pharmacokinetic study

We developed and validated a simple, sensitive, selective and reliable LC–ESI‐MS/MS method for direct quantitation of dropropizine enantiomers namely levodropropizine (LDP) and dextrodropropizine (DDP) in rat plasma without the need for derivatization as per regulatory guidelines. Dropropizine enantiomers and carbamazepine (internal standard) were extracted from 50 μL rat plasma using ethyl acetate. LDP and DDP resolved with good baseline separation (R_s = 4.45) on a Chiralpak IG‐3 column. The mobile phase consisted of methanol with 0.05% diethylamine pumped at a flow rate of 0.5 mL/min. Detection and quantitation were done in multiple reaction monitoring mode following the transitions m/z 237 → 160 and 237 → 194 for dropropizine enantiomers and the internal standard, respectively, in the positive ionization mode. The proposed method provided accurate and reproducible results over the linearity range of 3.23–2022 ng/mL for each enantiomer. The intra‐ and inter‐day precisions were in the ranges of 3.38–13.6 and 5.11–13.8 for LDP and 4.19–11.8 and 8.89–10.1 for DDP. Both LDP and DDP were found to be stable under different stability conditions. The method was successfully used in a stereoselective pharmacokinetic study of dropropizine enantiomers in rats following oral administration of racemate dropropizine at 100 mg/kg. The pharmacokinetic results indicate that the disposition of dropropizine enantiomers is not stereoselective and chiral inversion does not occur in rats.     

Molecular signal suppression by in situ microextraction in nuclear magnetic resonance spectroscopy

The detailed characterization of complex mixtures by NMR is often hampered by the presence of signals from uninformative compounds, the resonances of which overlap with those of the molecules of interest. We provide here a proof of principle for an approach to NMR signal suppression in complex samples using Molecularly Imprinted Polymers (MIPS). Addition of a few milligrams of polymer to a solution traps the target molecule in typical micromolar to millimolar concentration, thus achieving in situ signal suppression, without altering any other spectral features. This method minimized any manipulation or perturbation of the spectrum and was applied to a complex mixture of known compounds and to a plant extract, in both cases spiked with a compound (bisphenol A), which was subsequently removed by selective binding to a complementary MIP. What is described in this report is comparable with microextraction and may in due course be applied to a large number of analytical challenges. Copyright © 2014 John Wiley & Sons, Ltd.     

Synthesis,Spectroscopic Analysis,and In-Vitro Antimicrobial Evaluation of some Tetrahydrobenzo[a]Xanthene-11-Thiones

Abstract

A series of 12-aryl-8,9,10,12-tetrahydrobenzo[a]xanthene-11-thiones were synthesized by the reaction of substituted 12-aryl-8,9,10,12-tetrahydrobenzo[a]xanthene-11-ones with Lawesson's Reagent in toluene under standard reaction conditions. All synthesized compounds were characterized by IR, NMR (¹H and ¹³C), and mass spectra. Moreover, 2D-NMR (HOMOCOSY, HSQC, and HMBC) studies were also performed for compound 10b. The synthesized compounds were also screened for their antibacterial activities.

[Supplementary materials are available for this article. Go to the publisher's online edition of Phosphorus, Sulfer, and Silicon and the Related Elements for the following free supplemental files: Additional figures.]