ESR studies on calcite encrustation on Fili neotectonic fault, Greece

Electron spin resonance (ESR) study was done on calcite encrustation on Fili neotectonic fault surface, Greece. Normally such calcite encrustations on fault surfaces are not observed. Significantly, the ESR study has detected the presence of nitrate NO₃²⁻ radical in this calcite encrustation, havingg _⊥=2.0063±0.0001 and hyperfine coupling constantA _⊥=3.44 mT, the second such detection of nitrate NO₃²⁻ radical following a sample from Scott Glacier, Antarctica. From isochronal thermal annealing measurement the NO₃²⁻ radical was found to be quite stable, only fully annealed at 475°C. This study also shows that the ESR, as a tool, can be suitably applied to date the age of formation of the calcite encrustation with SO₃⁻ as an ESR dating signal by additive γ-ray irradiation. A preliminary estimation indicates the age of formation of calcite precipitation at Fili fault, Greece to be about 5600 years.     

Experimental characterization of hexatic smectic phases through electro-optic studies and dielectric relaxation spectroscopy

The electro-optic and complex dielectric behaviour of an antiferroelectric liquid crystal 4-(1-methylheptyloxycarbonyl)phenyl 4'-(n-butanoyloxyprop-1-oxy)biphenyl-4-carboxylate, having chiral SmC_A* and hexatic smectic phases, have been investigated. Complex dielectric permittivities were measured as a function of frequency, d.c. bias field and temperature. Spontaneous polarization was measured by the current reversal technique; tilt angle was measured under a polarizing microscope using a low frequency electric field. The electro-optic properties and dielectric behaviour of the material are compared with results obtained by DSC and polarizing optical microscopy. Dielectric relaxation processes in SmC_A* and hexatic smectic phases were determined. The dielectric strength at the SmC_A* to hexatic smectic phase transition is discussed in terms of coupling between the long range bond orientational order and smectic C director. It seems from the results of spontaneous polarization and dielectric relaxation spectroscopy that the material might possess an additional phase between the SmC_A* and hexatic smectic I* phases.     

A new trigonometric method of summation and its application to the degree of approximation

The object of the present investigation is to introduce a new trigonometric method of summation which is both regular and Fourier effective and determine its status with reference to other methods of summation (see §2-§4) and also give an application of this method to determine the degree of approximation in a new Banach space of functions conceived as a generalized Holder metric (see §5).     

Investigating laser rapid manufacturing for Inconel-625 components

This paper presents an investigation of laser rapid manufacturing (LRM) for Inconel-625 components. LRM is an upcoming rapid manufacturing technology, it is similar to laser cladding at process level with different end applications. In general, laser-cladding technique is used to deposit materials on the substrate either to improve the surface properties or to refurbish the worn out parts, while LRM is capable of near-net shaping the components by layer-by-layer deposition of the material directly from CAD model. In the present study, a high-power continuous wave (CW) CO₂ laser system, integrated with a co-axial powder-feeding system and a three-axis workstation were used. The effect of processing parameters during LRM of Inconel-625 was studied and the optimum set of parameters for the maximum deposition rate was established employing Orthogonal L9 array of Taguchi technique. Results indicated that the powder feed rate and the scan speed contributed about 56% and 26%, respectively to the deposition rate, while the influence of laser power was limited to 10% only. Fabricated components were subjected to non-destructive testing (like—ultrasonic testing, dye-penetrant testing), tensile testing, impact testing, metallographic examinations and micro-hardness measurement. The test results revealed defect-free material deposition with improved mechanical strength without sacrificing the ductility.     

Design and operation characteristics of a high power transverse flow pulser sustained cw CO2 laser

A transverse flow, transverse discharge cw CO₂ laser in which de discharge is sustained by employing high repetition rate high voltage pulses has been developed. Pulser sustained discharge through electrodes of innovative design provided uniform excitation at electrical input power densities more than 10 W/cc. Laser output power more than 2.5 kW was obtained in a laser gas mixture consisting of 0.5 mbar of CO₂, 16 mbar of N₂ and 38.5 mbar of He. Design details and operational characteristics of this laser are presented.     

Mössbauer studies of EFG of the different57Fe(57Co)-Oxygen configurations in oriented Y−Ba−Cu−O

We have determined the various parameters of the electric field gradient (EFG) for different Fe-oxygen configurations. This was achieved by analyses of a variety of spectra using a procedure which allows fitting of all spectra of oriented 1-2-3 compounds obtained at different tilt angles β simultaneously, taking into account the degree of texture. The use of a point charge model is invalidated because of the high degree of estimated covalence. The Mössbauer parameters are rationalized. The absence of any observed anisotropy of the mean square displacement of the dopant at the Cu(1) site is rather intriguing.     

Determination of the orientation of the electric field gradient at the Cu(1) site from the Mössbauer spectra of textured pellets made of YBa2Cu3O7−δ superconductor

A textured pellet of YBa₂Cu₃O_7?δ was prepared and doped with⁵⁷Co. After subsequent heat treatments the cobalt was found at the two copper sites. The degree of alignment of individual crystallites (about 40%) was determined from the Mössbauer spectrum by using a method developed by the authors [1]. The same method showed that the most characteristic doublet component of such spectra (δ=0.08 mm/s; |ΔE _Q|=1.96 mm/s) is associated with a site, most probably a Cu(1) site, where the EFG is parallel to thec direction of the unit cell. The sign ofV _zz turned out to be negative, giving a negative quadrupole splitting (ΔE _Q=?1.96 mm/s) for that component.     

Operational characteristics and power scaling of a transverse flow transversely excited CW CO<Subscript>2</Subscript> laser

Transverse flow transversely excited (TFTE) CO₂ lasers are easily scalable to multikilowatt level. The laser power can be scaled up by increasing the volumetric gas flow and discharge volume. It was observed in a TFTE CW CO₂ laser having single row of pins as an anode and tubular cathode that the laser power was not increasing when the discharge volume and the gas volumetric flow were increased by increasing the electrode separation keeping the gas flow velocity constant. The discharge voltage too remained almost constant with the change of electrode separation at the same gas flow velocity. This necessitated revision of the scaling laws for designing this type of high power CO₂ laser. Experimental results of laser performance for different electrode separations are discussed and the modifications in the scaling laws are presented.     

Dielectric spectroscopy of a smectic liquid crystal

Complex dielectric spectroscopy (frequency range 5 Hz-13 MHz) has been used to analyse the frequency, temperature and bias-field dependences of the molecular dynamics of a very high-spontaneous-polarization ferroelectric liquid crystalline material exhibiting SmA, SmC* and unknown SmX smectic phases. Different smectic phase transition temperatures have been observed from the study of the temperature dependence of the dielectric strength and the relaxation frequency. The phase transition temperatures (crystalline to isotropic phases) have also been described very accurately from the temperature-dependent symmetric and asymmetric shape parameters of the relaxation function and also the dc conductivity. In a planar aligned cell, two symmetric modes (Goldstone mode and domain mode) have been observed in both the SmX and SmC* phases. One asymmetric mode (X-mode) observed in the SmC* and SmA phases could be related to the interaction of dipoles of the ferroelectric liquid crystals being affected by the surface of the cell. The soft mode, which usually appears very close to the SmC*-SmA phase transition was not observed until the bias field was applied. The second order nature of the SmC*-SmA phase transition was revealed.