Measurement of K β K /α values using proton beamvalues using proton beam

The Measurement of K _β K _/α intensity ratios are measured in some 3d shell elements by using a 2 MeV proton beam along with a high resolution Si(Li) detector. The present Measurement of K _β K _/α intensity ratios are in good agreement with Scofield modified theoretical values, thus supporting the basic assumptions in that theory. From the present Measurement of K _β K _/α intensity ratios, it is evident that due to chemical effects, the experimental Measurement of K _β K _/α intensity ratios will be increased while they will be decreased due to the presence of simultaneous M-shell vacancies which are produced due to proton excitation.     

Green and Cost Effective Synthesis of Fluorescent Carbon Quantum Dots for Dopamine Detection

Carbon quantum dots (CQDs) due to its high fluorescent output is evolving as novel sensing material and is considered as future building blocks for nano sensing devices. Hence, in this investigation we report microwave assisted preparation and multi sensing application of CQDs. The microwave derived CQDs are characterized by Dynamic Light Scattering (DLS) experiment and Fourier Infrared spectra (FTIR) to investigate the size distribution and chemical purity respectively. Fluorescent emission spectra recorded at varying pH shows varying fluorescence emission intensities. Further, emission spectra recorded at different temperatures shows that fluorescence emission of CQDs greatly depends on temperature. Therefore, we demonstrate the pH and temperature sensing characteristics of CQDs by fluorescence quenching behaviour. In addition, the interaction and sensing behaviour of CQDs for dopamine is also presented in this work with a detection limit of 0.2 mM. The steady state and time-resolved methods have been employed in fluorescence quenching methods for sensing dopamine through CQDs at room temperature. The bimolecular quenching rate constants for different concentration have been measured. The interaction between CQDs and dopamine indicates fluorescence quenching method is an elegant process for detecting dopamine through CQDs.     

Highly enantioselective conjugate addition of malononitrile to 2-enoylpyridines with bifunctional organocatalyst

An efficient enantioselective conjugate addition of malononitrile to a range of β-substituted 2-enoylpyridines catalyzed by cinchona alkaloid-based bifunctional urea catalysts has been developed. Both enantiomers of the products could be achieved with the same level of enantioselectivity by using pseudoenantiomeric catalysts in up to 97% ee and in excellent yields. One of the enantioenriched products has been transformed to a highly functionalized piperidone derivative.     

Innovative approach for the synthesis of N-substituted amides from nitriles and alcohols using propylphosphonic anhydride (T3P®) under solvent-free conditions

Novel and convenient methodology for the construction of N-substituted amide derivatives have been developed from nitriles and alcohols using propylphosphonic anhydride (T3P^®). This methodology is an alternate approach to the synthesis of amides via Ritter reaction, which is one of the classical methods for the synthesis of N-substituted amides from nitriles and alcohols. In this approach, first T3P^® activates the alcohol which is then attacked by nitrile to form N-substituted amides. This methodology can also apply for the synthesis of benzhydryl ether. This developed protocol is one of the novel applications of T3P^®.     

Microwave‐synthesized Pepper Peduncle Carbon,Characterization, and Its Adsorption Studies

Adsorption on activated carbon is an efficient method for the removal of toxic dyes. However, since commercially available charcoal is quite expensive, activated carbon obtained from agricultural by‐products may serve as a good replacement. In this study, activated carbon was prepared from pepper peduncle, an agricultural waste product, by microwave activation. The synthesized carbon was characterized by X‐ray diffraction, scanning electron microscopy, Fourier transform infrared spectroscopy, and thermal gravimetric analysis techniques. It was then used for the adsorption of methylene blue dye from an aqueous solution, which was studied as a function of the dye concentration, contact time, and temperature. The adsorption data were fitted to Freundlich and Langmuir isotherm models. The adsorption kinetics was studied by employing first‐ and second‐order kinetic models, and it was found that the adsorption of methylene blue on the synthesized activated carbon follows a second‐order kinetic model. Effect of temperature on the adsorption process was studied, and the thermodynamic parameters such as activation energy, change in enthalpy, entropy, and free energy of adsorption were calculated on the basis of the absolute theory of reaction rate expressions. About 99.5–91.8% of the dye was removed for an initial dye concentration in the range 20–100 mg/g in 1 h. Thus the synthesized activated carbon was found to be very efficient in adsorbing the dye.     

Synthesis and antiviral activity of novel imidazo[2,1-b]thiazoles coupled with morpholine and thiomorpholines

Herein described the synthesis and antiviral evaluation of a novel series of morpholine and thio-morpholine coupled imidazo[2,1-b]thiazoles. The three-step reaction sequence involving the condensation of 1,3-dichloroacetone with thiourea followed by coupling with morpholine and thiomorpholine and finally cyclization with substituted α-bromoacetophenones yielded the desired imidazothiazoles 7(a–l) . Screening of all the new compounds for their in vitro antiviral activity against influenza virus A/Puerto Rico/8/34 (H1N1) in MDCK cells, resulted in two potent analogs, 7d (IC₅₀: 1.1 μM, C₅₀: >300 μM, SI = 273) and 7e (IC₅₀: 2.0 μM, C₅₀: >300 μM, SI = 150), with a favorable toxicity profile and are the best anti-influenza hit analogs for further structural optimization.     

Bi2O3/FAp,a sustainable catalyst for synthesis of dihydro-[1,2,4]triazolo[1,5-a]pyrimidine derivatives through green strategy

The bismuth loaded on fluorapatite (Bi₂O₃/FAp) proved to be an excellent catalyst for the synthesis of novel dihydro-[1,2,4]triazolo[1,5-a]pyrimidine derivatives via a three-component reaction involving the mixture of 1H-1,2,4-triazol-5-amine, ethyl cyanoacetate or ethyl acetoacetate, and different benzaldehydes in ethanol at room temperature. The catalyst material was characterized by X-ray diffraction, Brunauer–Emmett–Teller surface area analysis, Fourier-transform infrared, scanning electron microscopy, energy-dispersive X-ray spectroscopy, and transmission electron microscopy techniques. The efficacy of Bi₂O₃/FAp as a heterogeneous catalyst was evaluated with the loading of different wt% of bismuth on FAp. The 2.5% bismuth on FAp performed extremely well as a catalyst with a high yield of products (92%–96%) in a short reaction time (25–35 min). The catalyst was recovered by simple filtration. It showed undiminished activity up to five runs. Simple work-up, room temperature reaction, short reaction time, high yields, no column chromatography, and good reusability of catalyst are the merits of the proposed protocol. In addition, this process offers 100% carbon efficiency and 98% atom economy with noteworthy fiscal and environmental benefits.     

Enantiospecific resolution of rabeprazole by liquid chromatography on amylose-derived chiral stationary phase using photo diode array and polarimetric detectors in series

A simple and rapid liquid chromatographic method for enantioselective separation and determination of R-(+) and S-(−) enantiomers of rabeprazole in drugs and pharmaceuticals using photo diode array (PDA) and polarimetric detectors connected in series was developed. Chiralpak AD-H (250 mm × 4.6 mm) 5 μm column packed with amylose tris(3,5-dimethylphenyl carbamate) as a stationary phase and the mobile phase containing n-hexane:ethanol:2-propanol(75:15:10, v/v/v) in an isocratic mode has yielded baseline separation with resolution greater than 3.0 at 40 °C. Effects of ethanol, 2-propanol and temperature on separation were studied for optimum resolution. Lansoprazole sulphone was used as an internal standard (IS) for quantitative determination of individual enantiomers in bulk drugs as well as pharmaceutical formulations. The method was validated in terms of accuracy, precision and linearity according to ICH guidelines. The linearity of the method was studied in the range of 0.5-50 μg/ml and the r² was >0.9997. The inter- and intra-day precision of assay were determined (R.S.D. < 1%) and the recoveries were in the range of 99.63-100.22% with <1% R.S.D. The limits of detection (LOD) and quantification (LOQ) were 0.02 μg/ml and 0.07 μg/ml for both the enantiomers, respectively.     

One-pot green synthesis of novel 5,10-dihydro-1H-pyrazolo[1,2-b]phthalazine derivatives with eco-friendly biodegradable eggshell powder as efficacious catalyst

Research on Chemical Intermediates - An eco-friendly and efficient green protocol is developed for the synthesis of sixteen&nbsp;pyrazolo-phthalazine derivatives (5a–p) by using...     

Simple UV and visible spectrophotometric methods for the determination of doxycycline hyclate in pharmaceuticals

Doxycycline hyclate (DOX), a broad spectrum antibiotic with activity against a wide range of gram-positive and gram-negative bacteria, is widely used as a pharmacological agent and as an effector molecule in inducible gene expression system. Three simple, selective, rapid, accurate, precise and cost-effective spectrophotometric methods for the determination of DOX in bulk drug and in tablets have been developed and validated. First method (method A) is based on the measurement of absorbance of DOX in 0.1 M HCl at 240 nm. The second method (method B) is based on the measurement of yellow chromogen at 375 nm which is formed in 0.1 M NaOH. The third method is based on the measurement of 2: 1 complex formed between DOX and iron(III) in H₂SO₄ medium, the complex peaking at 420 nm (method C). The optimum conditions for all the three methods are optimized. Beer’s law was obeyed over the ranges 2.5–50.0, 1.50–30.0 and 10–100 g/mL for method A, method B and method C, respectively. The apparent molar absorptivity values are calculated to be 1.03 × 10⁴, 1.73 × 10⁴, and 5.21 × 10³ L mol⁻¹ cm⁻¹ for method A, method B, and method C, respectively. The Sandell sensitivity, limit of detection (LOD) and limit quantification (LOQ) values are also reported. All the methods were validated in accordance with current ICH guidelines. The developed methods were employed with high degree of precision and accuracy for the estimation of total drug content in commercial tablet formulations of DOX.