基于MATLAB的异步电动机线性化控制系统的仿真

从异步电动机在同步旋转坐标系下的状态方程出发，在一定的条件下，对其系数矩阵简化．推出异步电动机的线性化控制模型．并基于该模型得出异步电动机的线性化控制系统．以给定电机为例，对该模型的有效性、响应用MATLAB进行仿真分析．验证的结果说明上述模型具有实用价值．     

RO-heparin Inhibits L-Selectin-mediated Neutrophils Adhesion to Vascular Endothelium Under Flow Conditions

Introduction Migrationandrecruitmentofleukocytesfromblood toinflammatorylesionsitesaresequentiallyregulated byadhesionmoleculesandtheirreceptors[1].These lectinfamilyplaysamajorroleininitiatingattachement ofneutrophilstotheactivatedendothelium.P selectin,…     

A robust multisyringe system for process flow analysis. Part II. A multi-commuted injection system applied to the photometric determination of free acidity and iron(III) in metallurgical solutions

A new software-controlled volume-based system for sample introduction in process flow injection analysis was developed. By using a multi-syringe burette coupled with one or two additional commutation valves, the multi-commuted injection of precise sample volumes was accomplished. Characteristics and performance of the injection system were studied by injecting an indicator in a buffered carrier. Three configurations were implemented in order to achieve two different tasks: the single injection of a sample in a two- or three-channels manifold, and the dual injection into different streams. The two channel flow system using the single injection was applied to the determination of free acidity in diluted samples containing high levels of iron(III), by employing the single point titration methodology. The precipitation of ferric hydroxide was prevented using the ammonium and sodium salts of oxalate and acetate as buffer titrant. Methyl Red was employed as indicator. The procedure allows determination of acid concentration in solutions with a Fe(III)/H+ molar ratio up to 0.2. Samples with higher Fe(III)/H+ molar ratios were spiked with a known strong acid at dilution. The three-channel configuration was applied to the determination of ferric ions, using, as reagent, a merging mixture of sulfuric acid and potassium thiocyanate. The double injection system was implemented in series in a single (three-channel) manifold in such a way that a different injection volume and a changed reagent were used for each analyte. It was applied to the separated or sequential determination of free acidity and ferric ions. In this configuration, iron(III) was determined using 0.5-0.7% (w/v) sodium salicylate solution as reagent. The systems can operate at up to 100, 84 and 78 injections per hour, respectively. Determinations on synthetic and process samples compared well with the reference values and procedures. Recoveries of 95-102% with a maximum RSD value of 5.4% were found for acidity. The respective values obtained for iron determinations were 96-105% and 4.3%.     

化学键合吸附剂的合成及吸附行为

在无定型硅胶上化学键合十八烷基三氯硅烷，键合率17%-20％，粒度5μm-10μm，以此键合的吸附剂可有效地吸附香烟烟气中的焦油、亚硝胺，吸附率分别为15%-18％和37%-43％，研究了化学键合吸附剂的粒度和加入量对吸附性能的影响。     

Valgran, a program for potentiometric titrations with a versatile automatic modular system

A very flexible modular system for use with a portable IBM PC for potentiometric titrations is described. The appropriate software has been developed in order to obtain automatic end-points, and conventional, first-derivative, second-derivative and Gran curves, as well as a listing of the potentiometric points expressed in different ways. All these alternatives are selectable on menu presentations. The potentiometric system has been applied both the research and routine problems.     

A simple monitored thermometric determination of copper(II) by reaction-rate measurement based on the catalysis of the aerial oxidation of 2,2′-dipyridylketone hydrazone

The initial reaction rate is measured by monitoring the rate of increase of temperature of the solution with a thermistor; 0.2–2 mg l^?1 copper in the final solution is determined, with very few interferences.     

Analytical properties of the amidooxime group. V. Thermometric study of 3,3′-oxy-, 3,3′-thio- and 3,3′-iminodipropioamidooxime

The thermometric behaviour of three amidooximes (3,3′-oxy-, 3,3′-thio- and 3,3′-iminodipropioamidooxime) is studied in order to evaluate the errors in their thermometric titration with HCl and the corresponding neutralization enthalpies from the analysis of the enthalpograms. The dissociation parameters (ΔG_i, ΔH_i and ΔS_i) of the three compounds at 25°C are evaluated from the pK_a values and neutralization enthalpies.     

笃斯茎中六种无机元素含量分析

应用原子吸收光谱法测定了内蒙古地产的笃斯茎、叶中的Cu,Fe,Zn,Mn,Ca,Mg等六种人体必需微量元素及宏量元素的含量。从而为评价笃斯的品质及其药理、药效提供了具有一定价值的数据。     

含芴共轭单元的超支化聚合物的合成及表征

以芴和季戊四醇为初始物,分别合成了具有芴共轭单元和季戊四醇多臂结构的两种聚合单体,进一步采用Suzuki反应合成出一种结构新颖的部分共轭结构的超支化聚合物.利用紫外吸收光谱和荧光发射光谱对聚合物予以表征,结果表明,超支化聚合物具有与模型化合物分子相似的发光行为,既可以发出纯正的蓝光,又表现出支化结构对荧光发射的影响.差...