Use of the diphasic dialysis as a new extraction procedure in the determination of enrofloxacin and ciprofloxacin in egg

We have developed a new method for the analysis of the fluoroquinolones enrofloxacin and ciprofloxacin in eggs using a diphasic dialysis procedure as extraction and purification method. High pressure liquid chromatography-mass spectrometry (HPLC-MS) was used for the confirmatory determination of these compounds. The method was found to be linear between 10 and 800 ng g⁻¹ for enrofloxacin, and between 20 and 1600 ng g⁻¹ for ciprofloxacin. The recovery percentages were in the 70-104% range for enrofloxacin, and 55-97% for ciprofloxacin. The assay described was repeatable and reproducible with a limit of quantitation of 2 and 4 ng g⁻¹ for enrofloxacin and ciprofloxacin from egg, respectively.     

Application of the assay of aflatoxins by liquid chromatography with fluorescence detection in food analysis

HPLC using fluorescence detection has already become the most accepted method for the determination of aflatoxins due to its several advantages over other analytical methods. Both normal- and reversed-phase HPLC can be used. However the reversed-phase HPLC methods are more popular. Liquid chromatographic determination of aflatoxins using fluorescence detection and its application in food analysis is reviewed in this article.     

Development and Validation of Multi-Residue Method for Drugs Analysis in Human Feces by Liquid Chromatography–Tandem Mass Spectrometry

The use of veterinary drugs in animal production is a common practice to secure animal and human health. However, residues of administrated drugs could be present in animal food products. Levels of drugs in food of animal origin are regulated within the European Union. In recent years, residues have been detected not only in food, but also in the environmental elements such as water or soil, meaning that humans are involuntarily exposed to these substances. This article presents a multiclass method for the analysis of various therapeutic groups of pharmaceuticals in human feces. Pharmaceuticals are extracted from feces with an acid extraction solvent, and after filtration the extract was analyzed by HPLC–MS/MS. A limit of detection of 10 ng/g was achieved for 9 pharmaceuticals, with linearity over 0.99 and repeatability and reproducibility lower than 20%. The method was satisfactorily applied in 25 feces samples of individuals that had declared not to be under medical treatment for the last two months. Results indicate the presence of six different compounds at concentration between 10 and 456 ng/g. This preliminary study showed the involuntary exposure of human gut microbiota to active substances such as pharmaceuticals     

Influence of the synthetic conditions on the structural diversity of extended manganese-oxalato-1,2-bis(4-pyridyl)ethylene systems

We report herein the synthesis and physicochemical characterization of eight new manganese-oxalato compounds with 1,2-bis(4-pyridyl)ethylene (bpe): {(Hbpe)(2)[Mn(2)(μ-ox)(3)]·～0.8(C(2)H(5)OH)·～0.4(H(2)O)}(n) (1), {[Mn(μ-ox)(μ-bpe)]·xH(2)O}(n) (2), [Mn(2)(μ-ox)(2)(μ-bpe)(bpe)(2)](n) (3), [Mn(μ-ox)(μ-bpe)](n) (4a and 4b), and {[Mn(4)(μ-ox)(3)(μ-bpe)(4)(H(2)O)(4)]·(X)(2)·mY}(n) with X = NO(3)(-) (5a), Br(-) (5b), and ClO(4)(-) (5c) and Y = solvation molecules. The appropriate selection of the synthetic conditions allowed us to control the crystal structure and to design extended 2D and 3D frameworks. Compound 1 is obtained at acid pH values and its crystal structure consists of stacked [Mn(2)(μ-ox)(3)](2-) layers with cationic Hbpe(+) molecules intercalated among them. Compound 2 was obtained at basic pH values with a manganese/bpe ratio of 1:1, and the resulting 3D structure consists of an interpenetrating framework in which metal-oxalato chains are bridged by bpe ligands, leading to a microporous network that hosts a variable number of water molecules (between 0 and 1) depending on the synthetic conditions. Compound 3, synthesized with a manganese/bpe ratio of 1:3, shows a 2D framework in which linear metal-oxalato chains are joined by bis-monodentate 1,2-bis(4-pyridyl)ethylene ligands. The thermal treatment of compound 3 permits the release of one of the bpe molecules, giving rise to two new 2D crystalline phases of formula [Mn(μ-ox)(μ-bpe)](n) (4a and 4b) depending on the heating rate. The open structures of 5a-5c were synthesized in a medium with a high concentration of nitrate, perchlorate, or bromide salts (potassium or sodium as cations). These anions behave as templating agents directing the crystal growing toward a cationic porous network, in which the anions placed in the voids and channels of the structure present high mobility, as inferred from the ionic exchange experiments. Variable-temperature magnetic susceptibility measurements show an overall antiferromagnetic behavior for all compounds, which are discussed in detail.     

Tracing (r)bST in cattle: Liquid-based options for extraction and separation

Growth hormone (GH) or somatotropin (ST) is a species-specific polypeptide hormone produced in the pituitary gland of vertebrates. When administered exogenously to dairy cattle, it has galactopoietic effects and is capable of increasing the milk yield. The beginning of the commercial production of recombinant variants of bovine somatotropin (rbST), by the end of the 20th century, had a major economic impact in the dairy industry. Recombinant bST enabled large-scale applications in farms, enhancing significantly milk production. While it is banned in the European Union (EU), several countries permit the trade and use of recombinant somatotropins in animal husbandry. Also, rbST-free dairy products can be frequently found in the market of those countries, even though these labels are not actually verified in a laboratory. In this context, effective analytical methods are needed for residue control to avoid an illegal use of rbST but also to prevent fraudulent labeling in some cases. The present review includes studies published in the last 5 years (from 2012 to 2017) to monitor rbST in bovine animals, using liquid-based applications. It is then intended to serve as a practical guide to help those laboratories interested in developing analytical methods to detect rbST use and abuse.     

Lanthanide(III)/pyrimidine-4,6-dicarboxylate/oxalate extended frameworks: a detailed study based on the lanthanide contraction and temperature effects

Detailed structural, magnetic, and luminescence studies of six different crystalline phases obtained in the lanthanide/pyrimidine-4,6-dicarboxylate/oxalate system have been afforded: {[Ln(μ-pmdc)(μ-ox)(0.5)(H(2)O)(2)]·3H(2)O}(n) (1-Ln), {[Ln(μ-pmdc)(μ-ox)(0.5)(H(2)O)(3)]·2H(2)O}(n) (2-Ln), {[Ln(μ(3)-pmdc)(μ-ox)(0.5)(H(2)O)(2)]·~2.33H(2)O}(n) (3-Ln), {[Ln(2)(μ(3)-pmdc)(μ(4)-pmdc)(μ-ox)(H(2)O)(3)]·5H(2)O}(n) (4-Ln), {[Ln(μ(3)-pmdc)(μ-ox)(0.5)(H(2)O)(2)]·H(2)O}(n) (5-Ln), and [Ln(pmdc)(1.5)(H(2)O)(2.5)] (6-Ln). The slow generation of the oxalate (ox) anion, obtained from the in situ partial hydrothermal decomposition of the pyrimidine-4,6-dicarboxylate (pmdc) ligand, allows us to obtain good shaped single crystals, while direct addition of potassium oxalate provides the same compounds but as polycrystalline samples. The crystal structures of all compounds are based on the double chelation established by the pmdc and ox ligands to provide distorted 2D honeycomb layers that, in some cases, are fused together, leading to 3D systems, by replacing some of the coordinated water molecules that complete the coordination sphere of the lanthanide by uncoordinated carboxylate oxygen atoms of the pmdc. The presence of channels occupied by crystallization water molecules is also a common feature with the exception of compounds 5-Ln. It is worth noting that compounds 3-Ln present a commensurate crystal structure related to the partial occupancy of the crystallization water molecules placed within the channels. Topological analyses have been carried out, showing a previously nonregistered topology for compounds 4-Ln, named as jcr1. The crystal structures are strongly dependent on the lanthanide ion size and the temperature employed during the hydrothermal synthesis. The lanthanide contraction favors crystal structures involving sterically less hindranced coordination environments for the final members of the lanthanide series. Additionally, reinforcement of the entropic effects at high temperatures directs the crystallization process toward less hydrated crystal structures. The magnetic data of these compounds indicate that the exchange coupling between the lanthanide atoms is almost negligible, so the magnetic behavior is dominated by the spin-orbit coupling and the ligand field perturbation. The luminescence properties that exhibit the compounds containing Nd(III), Eu(III), and Tb(III) have been also characterized.     

A polymerase chain reaction-restriction fragment length polymorphism method based on the analysis of a 16S rRNA/tRNA(Val) mitochondrial region for species identification of commercial penaeid shrimps (Crustacea: Decapoda: Penaeoidea) of food interest

A simple PCR-RFLP method has been developed for the identification of 19 penaeid shrimp species of food interest belonging to the superfamily Penaeoidea. Preliminary amplification, sequencing and alignment of a 960 bp fragment of the 16S rRNA/tRNA(Val)/12S rRNA mitochondrial region allowed the design of 16Scru4/16Scru4 primers, constructed on well-conserved mitochondrial sequences of the penaeid shrimp species considered. Such primers afforded the amplification of an internal 515-535 bp region of the 16S rRNA/tRNA(Val) genes that, when subjected to cleavage with AluI, TaqI and HinfI, provided species-specific restriction patterns. Moreover, the proposed method also allowed the definition of different intraspecific restriction types between different populations of Litopenaeus vannamei, Farfantepenaeus notialis, Fenneropenaeus merguiensis, Metapenaeus sp., Melicertus latisulcatus and Pleoticus muelleri of different origins. The method described here was also successfully applied for the identification of penaeid shrimps in complex processed precooked foods, where this type of shellfish is used as an added-value food ingredient. Sequencing analysis provided new information about the genetic relationships among shrimps not only at the levels of species and genus, but also among different populations at intraspecific level. The 16S rRNA/tRNA(Val) fragment considered in this study seems to be accurate for shrimp species identification in raw and processed foodstuffs and for phylogenetic analysis among penaeid shrimp species.     

Cryogenic grinding pre-treatment improves extraction efficiency of fluoroquinolones for HPLC-MS/MS determination in animal tissue

An efficiency extraction of fluoroquinolones in chicken muscle was achieved by pulverizing it in a freezer mill before treatment with NaOH (10mM)/MeCN (1:1). The improvement of cryogenic grinding in the extraction was demonstrated for the same piece (whole leg) of four chickens treated with enrofloxacin in equal doses. A confirmatory method based on high-performance liquid chromatography tandem mass spectrometry (HPLC-MS/MS) was used to analyze the extracts. The chromatographic separation was achieved in 5min with a Synergi Fusion-RP 80A (50 x 2mm, 4μm) column filled with a hybrid polymer. The HPLC was coupled with a detector based in a quadrupole–linear ion trap Q-TRAP that allows a confirmatory detection according to the European legislation. The specificity of the method was assessed by testing a number of representative blank muscle samples (n = 10) to verify the absence of potential interfering compounds. The limits of detection and quantitation were 2 and 5ng g^-1 of quinolones in muscle samples, respectively. The chromatographic method was demonstrated to be linear for the range studied (5–500ng g^-1) with the P value for lack-of-fit in the ANOVA table greater or equal to 0.10 (calibration coefficient 0.9998 and 0.9996 for ciprofloxacin and enrofloxacin, respectively). The mean intra-day relative standard deviation (RSD) (n = 6, c = 50ng g^-1) was 6%; inter-day assay gave a RSD of 12%. The extraction and clean-up were carried out in one step with very satisfactory recovery data (between 65 and 101%).