On-line Method for Montelukast Determination in Bile Salt Medium with Multivariate Optimization and Fluorescent Detection

Journal of Analytical Chemistry - The present development involved a flow injection strategy using a mini-column of multiwalled carbon nanotubes and fluorescent detection (λex of 283 nm,...     

Ozonolysis of a Series of Methylated Alkenes: Reaction Rate Coefficients and Gas‐Phase Products

The gas‐phase ozonolysis of three methylated alkenes, i.e., trans‐2,2‐dimethyl‐3‐hexene (22dM3H), trans‐2,5‐dimethyl‐3‐hexene (25dM3H), and 4‐methyl‐1‐pentene (4M1P), has been investigated in the presence of sufficient hydroxyl radical scavenger in a laminar flow reactor at ambient temperature (296 ± 2 K) and P = 1 atm of dry air (RH ≤ 5%). Ozone levels in the reactor were monitored by an automatic analyzer. Alkene and gas‐phase product concentrations were determined via online sampling either on three‐bed adsorbent cartridges followed by thermodesorption and GC/FID‐MS analysis or on 2,4‐dinitrophenylhydrazine (DNPH) cartridges for subsequent HPLC/UV analysis. Reaction rate coefficients of (3.38 ± 0.12) × 10^?17 for 22dM3H and (2.71 ± 0.26) × 10^?17 for 25dM3H, both in cm³ molecule^?1 s^?1 units, have been obtained under pseudo–first‐order conditions. Primary carbonyl products have been identified for the three investigated alkenes, and branching ratios are reported. In the case of 4M1P ozonolysis, the yield of a Criegee intermediate was indirectly determined. Kinetics and product study results are compared to those of literature when available. This work represents the first investigation of reaction products in the ozonolysis of 22dM3H, 25dM3H, and 4M1P in a flow reactor.     

Photoluminescent properties and Raman spectra of ZnO-based scintillating glasses

Glasses in SiO₂–ZnO–BaO system with the different ZnO/BaO ratio were studied. In some cases, BaF₂ was introduced to substitute for BaO on the equal base. Photoluminescent spectra showed that ZnO in glass matrices behaved somewhat differently from ZnO crystals. Especially, the introduction of fluorine ions led to dramatic shift of UV emission band of glasses closer to that of ZnO crystals. Raman spectral analysis provided consistent results. In particular, Raman bands in the high frequency region are sensitive to effects of different ZnO/BaO or BaF₂/BaO ratio on structure of glasses.     

High-throughput purification of combinatorial libraries I: a high-throughput purification system using an accelerated retention window approach

We have developed a high-throughput purification system to purify combinatorial libraries at a 50-100-mg scale with a throughput of 250 samples/instrument/day. We applied an accelerated retention window method to shorten the purification time and targeted one fraction per injection to simplify data tracking, lower QC workload, and simplify the postpurification processing. First, we determined the accurate retention time and peak height for all compounds using an eight-channel parallel LC/UV/MS system, and calculated the specific preparative HPLC conditions for individual compounds. The preparative HPLC conditions include the compound-specific gradient segment for individual compounds with a fixed gradient slope and the compound-specific UV or ELSD threshold for triggering a fraction collection device. A unique solvent composition or solvent strength was programmed for each compound in the preparative HPLC in order to elute all compounds at the same target time. Considering the possible deviation of the predicted retention time, a 1-min window around the target time was set to collect peaks above a threshold based on UV or ELSD detection. Dual column preparative instruments were used to maximize throughput. We have purified more than 500 000 druglike compounds using this system in the past 3 years. We report various components of this high-throughput purification system and some of our purification results.     

Modeling high-pressure densities at wide temperature range with volume scaling: Cyclohexane + n-hexadecane mixtures

High-pressure density data for cyclohexane + n-hexadecane mixtures at a wide temperature range was modeled with several classical equations of state (EOS) and correlative models. A modification for softening the co-volume and another for a volume scaling of the Peng–Robinson EOS (VS-PR) were proposed. The VS-PR model is able to correlate the pure component experimental data employing only five adjustable parameters, with root-mean-square deviation (RMSD) between calculated and experimental densities essentially within the experimental error. This result is superior to widely used approaches, i.e., a six parameter Tait model and six parameter volume translations (temperature and pressure dependent) for Peng–Robinson and Patel–Teja EOS. The VS-PR model also represents well the isobaric thermal expansion and the isothermal compressibility coefficients of the pure cyclohexane, a small naphthenic substance as well as a long chain n-alkane hydrocarbon, n-hexadecane. When modeling the mixture data, the use of VS-PR model of pure components along with the Redlich–Kister expansion, truncated at the first term, the density was correlated within a RMSD only 60% greater than the experimental error. The proposed model is able to accurately represent all the tested mixture data with a relatively small number of parameters.     

Ethylene polymerization over supported MAO/(nBuCp)2ZrCl2 catalysts: Influence of support properties

The catalytic system methylaluminoxane (MAO) and bis(n-butylcyclopentadienyl)zirconium dichloride ((nBuCp)₂ZrCl₂) was immobilized on commercial silica, silica-alumina and aluminophosphate calcined at different temperatures. The properties of the supports were determined by using N₂ adsorption-desorption isotherms at 77 K, FT-IR spectroscopy and SEM. After aluminium and zirconium impregnation, the catalysts were analyzed by ICP-AES, FT-IR and UV-vis spectroscopy. Ethylene polymerizations were carried out in a Schlenk tube at 70 °C and 1.2 bar of ethylene pressure. The polyethylene obtained was characterized by GPC, DSC and SEM.Catalysts supported on silica-alumina exhibited higher polymerization activity than those supported on silica and aluminophosphate. Besides, the activity of MAO/(nBuCp)₂ZrCl₂ catalytic system supported on silica-alumina and aluminophosphate decreased strongly with support calcination temperature, while remained almost constant when silica was employed as support. All these experimental features suggest a role of the support acid properties and hydroxyl group population in the generation of active polymerization species.     

Preparation of quinoxalines, dihydropyrazines, pyrazines and piperazines using tandem oxidation processes

Alpha-hydroxyketones undergo MnO2-mediated oxidation followed by in situ trapping with aromatic or aliphatic 1,2-diamines to give quinoxalines or dihydropyrazines, respectively, in a one pot procedure which avoids the need to isolate the highly reactive 1,2-dicarbonyl intermediates. Modifications of the procedure allow the formation of pyrazines and piperazines.     

Microwave-assisted extraction of zearalenone from wheat and corn

A microwave-assisted extraction (MAE) method has been developed for determination of zearalenone in wheat and corn by LC-MS with an atmospheric pressure chemical ionization interface (APCI). Matrix effects were minimized by use of matrix-matched standard curves for quantification of the analyte. The limit of quantification (LOQ) of the method was 30 ng g(-1) in wheat and 20 ng g(-1) in corn. The rapid LC-MS method enabled analysis of the extracts without clean-up, thereby reducing analyte losses, the time required for the analytical procedure, and costs. A factorial design approach was used to examine the effect on extraction efficiency of the main extraction conditions - time, temperature, and solvent. On the basis of results from statistical assessment extraction was performed with 1:1 (v/v) methanol-acetonitrile at 80 degrees C for 5 min. When these extraction conditions were applied to a wheat sample from a recently conducted international proficiency test, 92% (103 ng g(-1)) of the assigned zearalenone concentration (112 ng g(-1)) in the test material was obtained. This result was within the uncertainty (u) range of the assigned value of the test material (u=+/-15.8 ng g(-1), alpha=0.05) thereby demonstrating the accuracy of the method was sufficient. The precision of the whole method was also confirmed to be adequate, because the observed relative standard deviation (RSD) of 12% (n=10) also fulfils the quality criteria recommended by European guidelines for in-house method validation.     

A novel application of the Diels-Alder reaction: nitronaphthalenes as normal electron demand dienophiles

Thermal reactions between nitronaphthalenes and butadienes were studied. It was demonstrated that these reactions are capable of undergoing the normal electron demand Diels-Alder reaction, with a variety of dienes affording the phenanthrene derivatives. The influence of the extension and type of substitution was also discussed. When the electron-withdrawing activation of the naphthalenic nucleus or the donor properties of the dienes were not enough, N-naphthylpyrroles were detected as main product, suggesting that a competitive reaction would probably take place. The results clearly confirmed the dienophilic nature of nitronaphthalenic double bonds and provided an alternative procedure for phenanthrene derivatives and N-naphthylpyrroles' synthesis. The relative reactivity of the reactants and the viability of the reactions were discussed from a theoretical point of view.     

Mass overloading in the flow field-flow fractionation channel studied by the behaviour of the ultra-large wheat protein glutenin

Flow field-flow fractionation (FFF) has previously been used in successful fractionation and characterisation of the ultra-large wheat protein glutenin. The many parameters, which may influence the retention behaviour, especially when analysing extremely high-molecular-mass samples such as glutenin, are here reported. Size determination from the sample retention time, using FFF theory, will as a result have a very low accuracy. The need for direct molecular mass determination, such as by light scattering, in combination with FFF, in order to do accurate size measurements of glutenin is pointed out as well as the importance to minimise the overloading.