Mechanical properties of cold sprayed Titanium and Nickel based coatings

Cold spray is an innovative coating technology. Very fine particles are accelerated, then sprayed on a substrate in condition very far from material melting. The unique mechanical properties experienced by the sprayed material are due to the severe plastic deformation acting during particle impact. In the present paper, the microstructural and mechanical behavior of Ti- and Ni-based nanocomposites coatings produced via cold spray are presented. (© 2015 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim)     

Identification and Quantification of Polycyclic Aromatic Hydrocarbons in Polyhydroxyalkanoates Produced from Mixed Microbial Cultures and Municipal Organic Wastes at Pilot Scale

Polyhydroxyalkanoates (PHAs) are well-known biodegradable plastics produced by various bacterial strains, whose major drawback is constituted by the high cost of their synthesis. Producing PHAs from mixed microbial cultures and employing organic wastes as a carbon source allows us to both reduce cost and valorize available renewable resources, such as food waste and sewage sludge. However, different types of pollutants, originally contained in organic matrices, could persist into the final product, thus compromising their safety. In this work, the exploitation of municipal wastes for PHA production is evaluated from the environmental and health safety aspect by determining the presence of polycyclic aromatic hydrocarbons (PAHs) in both commercial and waste-based PHA samples. Quantification of PAHs by gas chromatography-mass spectrometry on 24 PHA samples obtained in different conditions showed very low contamination levels, in the range of ppb to a few ppm. Moreover, the contaminant content seems to be dependent on the type of PHA stabilization and extraction, but independent from the type of feedstock. Commercial PHA derived from crops, selected for comparison, showed PAH content comparable to that detected in PHAs derived from organic fraction of municipal solid waste. Although there is no specific regulation on PAH maximum levels in PHAs, detected concentrations were consistently lower than threshold limit values set by regulation and guidelines for similar materials and/or applications. This suggests that the use of organic waste as substrate for PHA production is safe for both the human health and the environment.     

Laser heating of optically thin samples

Summary A mathematical model able to describe the temperature profiles generated in a thin film by the steady-state illumination by a Gaussian laser beam is presented. The film is supposed to be made by a weakly absorbing liquid sample bounded by two parallel transparent plates, the cell walls, whose thermal exchange to the surrounding ambient may be assumed to be linear with the temperature difference. An analytical solution of the problem is presented in form of Hankel transform and a matrix numerical approach to the computation of the temperature profiles is reported. It is particularly well suited to a computer implementation and allows one to get very accurate results in very short computing times. The influence of the heat exchange coefficient to the ambient is shown in an example. A check of the method accuracy is performed by comparison with literature results in the particular case of infinite heat exchange coefficient. To speed up publication, the authors of this paper have agreed to not receive the proofs for correction.     

羊八井50m~2RPC地毯性能研究YBJ-ARGO合作组(英文)

利用羊八井５０ｍ２ＲＰＣ地毯（ＹＢＪ－ＡＲＧＯ实验原型）的测试数据对其性能进行了分析研究,包括原初粒子方位角分布、天顶角分布、地毯的角分辨、探测时间系统误差对方位角分布的正弦调制、探测时间系统误差的离线修正、几何不对称的小型地毯探测器上原初粒子到达方向重建误差造成的方位角分布的不均匀性等．     

Determination of aflatoxins in hazelnuts by various sample preparation methods and liquid chromatography-tandem mass spectrometry

A sensitive and reliable liquid chromatography-tandem mass spectrometric with electrospray ionization method for determining aflatoxins in hazelnuts has been developed. Three different extraction techniques, such as homogenization, ultrasonic extraction, and matrix solid phase dispersion have been tested and compared in terms of recovery, matrix effect, accuracy and precision. Ultrasound extraction was the most performing sample preparation method. Absolute recoveries for analytes and I.S. ranged from 93 to 101%. Accuracy and precision were calculated using matrix matched calibration, and ranged 91-102% and 2-11%, respectively. CC alpha and CC beta for aflatoxin B1 (EU limit=2 microg/kg) were 2.15 and 2.33 microg/kg, respectively. A ruggedness test performed on three other matrices demonstrated that sonication time was critical and a matrix matched calibration must be constructed for every sort of matrix.     

Determination of aflatoxins in olive oil by liquid chromatography-tandem mass spectrometry

A liquid chromatography-tandem mass spectrometric with electrospray ionization (LC/ESI-MS/MS) method for determining the four naturally occurring aflatoxins (AFs) B1, B2, G1, and G2 in olive oil is proposed. AFs were extracted from oil sample by means of matrix solid phase dispersion (MSPDE), utilizing C18 as dispersing material. No further purification step, such as lipid removal, was performed. Aflatoxin M1, the hepatic metabolite of AFB1, was employed as internal standard. Olive oil extract was analyzed by LC/ESI-MS/MS in positive ionization mode, with multireaction monitoring acquisition. Due to a signal suppression ranging between 4 and 23%, quantitation was performed by matrix-matched calibration curves. The regression line coefficients of determination were above 0.9991. Sample recoveries ranged from 92 to 107%, with relative standard deviations below 13% for spiking levels between 0.5 and 5 ng g⁻¹; method quantification limits ranged between 0.04 and 0.12 ng g⁻¹. The developed LC/ESI-MS/MS method, although not as sensitive as LC coupled to fluorescence detection, is rapid, selective, accurate and precise, thus it can be used as confirmatory assay. The MSPDE appears suitable for application to other oleaginous matrices and for multiresidue investigation.     

Mycoestrogen determination in cow milk: Magnetic solid‐phase extraction followed by liquid chromatography and tandem mass spectrometry analysis

Recently, magnetic solid‐phase extraction has gained interest because it presents various operational advantages over classical solid‐phase extraction. Furthermore, magnetic nanoparticles are easy to prepare, and various materials can be used in their synthesis. In the literature, there are only few studies on the determination of mycoestrogens in milk, although their carryover in milk has occurred. In this work, we wanted to develop the first (to the best of our knowledge) magnetic solid‐phase extraction protocol for six mycoestrogens from milk, followed by liquid chromatography and tandem mass spectrometry analysis. Magnetic graphitized carbon black was chosen as the adsorbent, as this carbonaceous material, which is very different from the most diffuse graphene and carbon nanotubes, had already shown selectivity towards estrogenic compounds in milk. The graphitized carbon black was decorated with Fe₃O₄, which was confirmed by the characterization analyses. A milk deproteinization step was avoided, using only a suitable dilution in phosphate buffer as sample pretreatment. The overall process efficiency ranged between 52 and 102%, whereas the matrix effect considered as signal suppression was below 33% for all the analytes even at the lowest spiking level. The obtained method limits of quantification were below those of other published methods that employ classical solid‐phase extraction protocols.     

Multiresidue determination of UV filters in water samples by solid‐phase extraction and liquid chromatography with tandem mass spectrometry analysis

UV filters, contained in sunscreens and other cosmetic products, as well as in some plastics and industrial products, are nowadays considered contaminants of emerging concern because their widespread and increasing use has lead to their presence in the environment. Furthermore, some UV filters are suspected to have endocrine disruption activity. In the present work, we developed an analytical method based on liquid chromatography with tandem mass spectrometry for the determination of UV filters in tap and lake waters. Sixteen UV filters were extracted from water samples by solid‐phase extraction employing graphitized carbon black as adsorbent material. Handling 200 mL of water sample, satisfactory recoveries were obtained for almost all the analytes. The limits of detection and quantification of the method were comparable to those reported in other works, and ranged between 0.7–3.5 and 1.9–11.8 ng/L, respectively; however in our case the number of investigated compounds was larger. The major encountered problem in method development was to identify the background contamination sources and reduce their contribution. UV filters were not detected in tap water samples, whereas the analyses conducted on samples collected from three different lakes showed that the swimming areas are most subject to UV filter contamination.     

Natural estrogens in dairy products: Determination of free and conjugated forms by ultra high performance liquid chromatography with tandem mass spectrometry

Natural estrogens are synthesized by mammals in different amounts depending on the developmental stage and pregnancy/lactation period, and they may pass into milk, where they are mostly present as glucuronated and sulfated forms. In modern dairy practices, about 75% of milk is produced from pregnant cows; therefore, the amount of hormones that may pass into milk could be of concern. While estrogen determination in milk has been investigated in depth, the individual determination of estrogens and their conjugated forms in dairy products has not been fully addressed. The aim of this work was to develop and assess a sensitive method, using the peculiar retention properties of graphitized carbon black, to extract natural free estrogens and their major conjugated metabolites, without any enzymatic cleavage, from yogurt, cheese, and butter. The free and conjugated estrogens were eluted in two distinct fractions from the solid‐phase extraction cartridge and analyzed separately by ultra high performance liquid chromatography coupled to tandem mass spectrometry. Recoveries were higher than 80% for all the three sample typologies. The highest matrix effects were observed for butter, which was richest in lipid content, but was below 30%. A survey on some commercial dairy products suggests that production processes decreased estrogen content.     

Aflatoxin M1 determination in cheese by liquid chromatography-tandem mass spectrometry

A new method for determining aflatoxin M1 (AFM1) in cheese by liquid chromatography-tandem mass spectrometry has been developed. Two methodologies were compared for sample extraction. The first one involves sample extraction with dichloromethane for hard, aged cheese or acetone for fresh cheese and includes a preliminary matrix solid-phase dispersion-extraction step before solid-phase extraction (SPE) clean-up by a Carbograph-4 cartridge. The second method uses a water/methanol solution (90:10, v/v) extraction at 150 degrees C before clean-up. The average recoveries of AFM1 from samples spiked at levels of 0.25-0.45 microg/kg, were 81-92% and the precision (RSD) ranged from 3 to 7% with the first method, whilst the average recoveries were 79-84%, and RSD ranged from 7 to 15% for the second method. Due to different matrix effect, the quantification limits were 0.019-0.025 microg/kg in the first case and 0.048-0.143 microg/kg in the second one, depending on cheese typology.