Direct determination of mitoxantrone and its mono- and dicarboxylic metabolites in plasma and urine by high-performance liquid chromatography

The simultaneous isolation and determination of mitoxantrone (Novantrone) and its two known metabolites (the mono- and dicarboxylic metabolites) were carried out using a high-performance liquid chromatographic (HPLC) system equipped with an automatic pre-column-switching system that permits drug analysis by direct injection of biological samples. Plasma or urine samples were injected directly on to an enrichment pre-column flushed with methanol-water (5:95, v/v) as the mobile phase. The maximum amount of endogenous water-soluble components was removed from biological samples within 9 min. Drugs specifically adsorbed on the pre-column were back-flushed on to an analytical column (Nucleosil C18, 250 X 4.6 mm I.D.) with 1.6 M ammonium formate buffer (pH 4.0) (2.5% formic acid) containing 20% acetonitrile. Detection was effected at 655 nm. Chromatographic analysis was performed within 12 min. The detection limit of the method was about 4 ng/ml for urine and 10 ng/ml for plasma samples. The precision ranged from 3 to 11% depending on the amount of compound studied. This technique was applied to the monitoring of mitoxantrone in plasma and to the quantification of the unchanged compound and its two metabolites in urine from patients receiving 14 mg/m2 of mitoxantrone by intravenous infusion for 10 min.     

Thermal analysis of corrosion products formed on carbon steel in ammonium chloride solution

The influence of different ions NO₃ ^? and SO₄ ^2? on the carbon steel corrosion in ammonium chloride was investigated using mass loss measurements and potentiodynamic polarization. Corrosion products were analyzed using X-ray photoelectron spectroscopy (XPS) and simultaneous thermal and differential scanning calorimetry (TG/DSC). XPS analysis shows that the main product of corrosion is a non-stoichiometric Fe³⁺ oxyhydroxide, consisting of a mixture of FeO(OH) and FeO(OH) containing inclusions of these anions, species such as Fe³⁺O(OH,Cl^?); Fe³⁺O(OH,SO₄ ^2?); and Fe³⁺O(OH,NO₃ ^?). TG/DSC confirms the decomposition of the rusty products formed by chemical corrosion, compounds like Fe³⁺ oxyhydroxides, with β-FeOOH as the major phase, crystal structure of which may contain Cl^?, NO₃ ^?, and SO₄ ^2?—e.g., akaganeite [Fe³⁺O(OH,A)].     

Glass foam from window panes and bottle glass wastes

Glass foams are building materials that now compete with classic insulating polymeric and fiber materials for thermal enveloping. The low flammability, high chemical durability and thermal stability are distinct advantages over polymeric materials. The present paper proposes the possibility of producing glass foam using two types of recycled glass wastes (window panes and bottle glass) together with plaster wastes from used ceramic casting molds as foaming agent. Optical microscopy, measurements of apparent porosity and density, hydrolytic and chemical stability, as well as thermal conductivity were used in order to characterize the obtained glass foams as insulator materials for the building industry. The apparent porosity of glass foams ranges between 20.19–54.54% when using window glass wastes, and 18.77–51.75% with bottle glass wastes. Thermal conductivity was less than 0.25 W mK-1 for all the studied glasses. The obtained results confirm that there exists an alternative method for producing glass foams, for example, from glass wastes and used ceramic plaster molds, which are utilized as foaming agents with good chemical stability and insulating properties.     

Theory and ab initio calculation of radiative lifetime of excitons in semiconducting carbon nanotubes

We present a theoretical analysis and first-principles calculation of the radiative lifetime of excitons in semiconducting carbon nanotubes. An intrinsic lifetime of the order of 10 ps is computed for the lowest optically active bright excitons. The intrinsic lifetime is, however, a rapid increasing function of the exciton momentum. Moreover, the electronic structure of the nanotubes dictates the existence of dark excitons near in energy to each bright exciton. Both effects strongly influence measured lifetime. Assuming a thermal occupation of bright and dark exciton bands, we find an effective lifetime of the order of 10 ns at room temperature, in good accord with recent experiments.     

An Inequality Involving Tight Closure and Parameter Ideals

An inequality is established involving colengths of the tightclosure of ideals of systems of parameters in local rings withsome mild conditions. As an application, a proof is given ofa result due to Goto and Nakamura (first conjectured by Watanabeand Yoshida), which states that the Hilbert–Samuel multiplicityof a parameter ideal is greater than or equal to the colengthof the tight closure of the ideal. The result is also furtherrefined. 2000 Mathematics Subject Classification 13D40, 13A35,13H15.     

Biosensors for phenol derivatives using biochemical signal amplification

Two different approaches, both exploiting two enzymes cooperative functioning, to enhance the sensitivity of tyrosinase (PPO) based biosensor for amperometric detection of phenols have been compared. For this purpose, one monoenzyme electrode (PPO) and two bienzyme electrodes (PPO and d-glucose dehydrogenase, GDH; PPO and horseradish peroxidase, HRP) were constructed using agar-agar gel as enzyme immobilization matrix. The biosensors responses for l-tyrosine detection were recorded at −50 mV versus saturated calomel electrode (SCE). The highest sensitivity (74 mA M⁻¹) was observed for the PPO-GDH couple, while that recorded for PPO-HRP couple system was only 32 times higher than that measured for monoenzyme electrode (0.01 mA M⁻¹). The ability of the PPO-, PPO-GDH-, PPO-HRP-based biosensors to assay phenols was demonstrated by quantitative determination of phenol, 1,2-dihydroxybenzene, 1,3-dihydroxybenzene, 1,4-dihydroxybenzene, 2-amino-3 (4-hydroxyphenyl) propanoic acid, 2-hydroxytoluene, 3-hydroxytoluene, 4-hydroxytoluene, 4-clorophenol, 3-clorophenol, 2-clorophenol, 4-hydroxybenzoic acid.     

Faber-hypercyclic operators

Let Ω be a bounded domain of the complex plane whose boundary is a closed Jordan curve and (F _n ) _n≥0 the sequence of Faber polynomials of Ω. We say that a bounded linear operator T on a separable Banach space X is Ω-hypercyclic if there exists a vector x of X such that {F _n (T)x: n ≥ 0} is dense in X. We show that many of the results in the spectral theory of hypercyclic operators involving the unit disk or its boundary have Ω-hypercyclic counterparts which involve the domain Ω or its boundary. The influence of the geometry of Ω or the smoothness of its boundary on Faber-hypercyclicity is also discussed.     

Analysis of an optimal control problem for the three-dimensional coupled modified Navier-Stokes and Maxwell equations

The mathematical formulation and analysis of an optimal control problem associated with a viscous, incompressible, electrically conducting fluid in a bounded three-dimensional domain with fixed perfectly conducting boundaries is considered. The objective of control is the matching of the velocity and magnetic fields to given target fields; control is effected through distributed mechanical force and current controls. The existence of optimal solutions is shown, the Gâteaux differentiability for the magnetohydrodynamic system with respect to controls is proved, and the optimality system is obtained.     

Cyclodextrin complexation improves aqueous solubility of the antiepileptic drug,rufinamide: solution and solid state characterization of compound-cyclodextrin binary systems

Rufinamide (RUF) was characterized in terms of cyclodextrin (CD) complexation in order to improve its aqueous solubility. Binary systems of RUF with three CDs—β-cyclodextrin (β-CD), randomly methylated-β-cyclodextrin (RAMEB) and sulfobutylether-β-cyclodextrin (SBE-β-CD)—were characterized with a wide variety of analytical techniques. Liquid state characterization was carried out by complementary techniques such as nuclear magnetic resonance spectroscopy (NMR), capillary electrophoresis (CE), mass spectrometry (MS) and phase solubility studies. The latter revealed that the stability of the complexes decreased in the order of RAMEB?>?β-CD?>?SBE-β-CD. A_L-type diagrams were obtained in all cases, characteristic of 1:1 stoichiometry, with a maximum of over 15-fold increase in RUF solubility, when complexed with RAMEB. NMR Job plot and MS studies confirmed phase solubility results, regarding the binding stoichiometry. ¹H NMR and 2D ROESY investigations revealed the inclusion of the triazole moiety of RUF, confirmed by molecular modeling. Solid state complexation in 1:1 molar ratio was carried out by kneading method and investigated by differential scanning calorimetry (DSC) and infrared spectroscopy (IR). Comparative dissolution studies indicated an over two-fold improvement in dissolution efficacy of the kneaded products, when compared to the pure drug. Results of the present study might pave the way for a drug formulation with improved bioavailability.