Determination of manganese in brain samples by slurry sampling graphite furnace atomic absorption spectrometry

A simple procedure for the determination of manganese in different sections of human brain samples by graphite furnace atomic absorption spectrometry has been developed. Brain sections included cerebellum, hypothalamus, frontal cortex, vermix and encephalic trunk. Two sample preparation procedures were evaluated, namely, slurry sampling and microwave-assisted acid digestion. Brain slurries (2% w/v) could be prepared in distilled, de-ionized water, with good stability for up to 30 min. Brain samples were also digested in a domestic microwave oven using 5 ml of concentrated HNO₃. A mixed palladium+magnesium nitrate chemical modifier was used for thermal stabilization of the analyte in the electrothermal atomizer up to pyrolysis temperatures of 1300 °C, irrespective of the matrix. Quantitation of manganese was conducted in both cases by means of aqueous standards calibration. The detection limits were 0.3 and 0.4 ng ml⁻¹ for the slurry and the digested samples, respectively. The accuracy of the procedure was checked by comparing the results obtained in the analysis of slurries and digested brain samples, and by analysis of the NIST Bovine Liver standard reference material (SRM 1577a). The ease of slurry preparation, together with the conventional set of analytical and instrumental conditions selected for the determination of manganese make such methodology suitable for routine clinical applications.     

Asymmetric synthesis of 4,4-disubstituted-2-imidazoli-dinones: potent NK1 antagonists

[structure: see text] A highly efficient and practical synthesis of 4,4-Disubstituted-2-Imidazolidinones utilizing a "self-reproduction of the center of chirality" strategy is described.     

Separation of Tetracycline Antibiotics by Hydrophilic Interaction Chromatography Using an Amino-Propyl Stationary Phase

In this work the potential of hydrophilic interaction chromatography (HILIC) is explored for the analysis of tetracycline antibiotics. The choice of the polar stationary phase is first discussed and it is demonstrated that aminopropyl stationary phases lead to higher efficiencies and peak symmetry than bare silica ones. The influence of the composition of the mobile phase is studied next : the concentration of the weaker solvent (acetonitrile), the nature and concentration of the more polar solvent (water or methanol), pH, the nature and ionic strength of the buffer. It is shown that high efficiencies are reached only with a citrate buffer that impairs the interactions with the residual silanol groups whatever the mobile phase pH is. We demonstrate that the citrate buffer strongly interacts with the cationic moiety of the aminopropyl stationary phase and thus reduces the accessibility of silanols. The separation of oxytetracycline, tetracycline and chlortetracycline is achieved in a few minutes at pH 3.5 or 5, with no peak tailing as usually observed in reversed phase liquid chromatography with an opposite elution order when compared with reversed phase liquid chromatography.     

Determination of diethanolamine or <Emphasis Type="Italic">N</Emphasis>-methyldiethanolamine in high ammonium concentration matrices by capillary electrophoresis with indirect UV detection: application to the analysis of refinery process waters

Alkanolamines such as diethanolamine (DEA) and N-methyldiethanolamine (MDEA) are used in desulfurization processes in crude oil refineries. These compounds may be found in process waters following an accidental contamination. The analysis of alkanolamines in refinery process waters is very difficult due to the high ammonium concentration of the samples. This paper describes a method for the determination of DEA in high ammonium concentration refinery process waters by using capillary electrophoresis (CE) with indirect UV detection. The same method can be used for the determination of MDEA. Best results were achieved with a background electrolyte (BGE) comprising 10 mM histidine adjusted to pH 5.0 with acetic acid. The development of this electrolyte and the analytical performances are discussed. The quantification was performed by using internal standardization, by which triethanolamine (TEA) was used as internal standard. A matrix effect due to the high ammonium content has been highlighted and standard addition was therefore used. The developed method was characterized in terms of repeatability of migration times and corrected peak areas, linearity, and accuracy. Limits of detection (LODs) and quantification (LOQs) obtained were 0.2 and 0.7 ppm, respectively. The CE method was applied to the determination of DEA or MDEA in refinery process waters spiked with known amounts of analytes and it gave excellent results, since uncertainties obtained were 8 and 5%, respectively.     

Glycidol syntheses and valorizations: Boosting the glycerol biorefinery

1. Download : Download high-res image (130KB)
2. Download : Download full-size image

     

Comparison of tryptophan interactions to free and grafted BSA protein

The binding of d- and l-tryptophan molecules to bovine serum albumin (BSA) protein has been studied using liquid chromatography and ultrafiltration in the pH range from 7 to 11. A hydrophobic interaction between tryptophan and BSA has been observed at pH 7.0 on BSA grafted chromatographic column. However, this interaction is negligible at higher pH for which the interaction to the stereospecific site was predominant. For both grafted and free proteins, the complexation mechanism was a competitive binding of d- and l-enantiomers on a single site. The apparent complexation constants for both d- and l-tryptophan show a maximum in the pH range 9-10. The variations of the apparent complexation constants versus pH were the result of the protonation of both the amino acid and a single site of the protein assuming that the complexation occurs between the zwitter-ionic amino acid form and the unprotonated BSA site. The apparent pK(BSA) is slightly shifted from 8.3 for grafted BSA protein to 9.4 for free BSA protein. This shift is presumably as a result of the different protein conformation.     

Conformational studies by dynamic NMR. 94.1 cogwheel pathway for the stereomutations of durene derivatives containing the mesityl ring

The low-temperature NMR spectra of 1,4-bis(mesitoyl)durene, 1, and of 1,4-bis(mesitylethenyl)durene, 2, reveal the presence of syn and anti rotamers at the equilibrium, their relative proportions depending on the dielectric constant of the solvent. In solution the more stable rotamer of 1 is the anti whereas, in the case of 2, the more stable is the syn. Depending on the crystallization solvent employed the more (anti) and the less stable (syn) rotamers were both observed (X-ray diffraction) in the solid state of 1. On the other hand, only the less stable rotamer (anti) was found to be present in the solid state of 2. As shown by MM calculations, the syn-to-anti interconversion occurs via a correlated process (cogwheel pathway) involving the mesityl-C and durene-C bond rotations: the dynamic NMR technique yields an experimental barrier of 8.2 kcal mol(-)(1) for 1 and 13.1 kcal mol(-)(1) for 2. In the case of derivative 2 a second barrier, due to a second type of correlated rotation process (torsion), was also determined (8.6 kcal mol(-)(1)). As a consequence of the restriction of this second torsional motion the anti rotamer of 2 displays two distinguishable NMR spectra at -133 degrees C, corresponding to a pair of conformers with different symmetry (anti C(i)() and anti C(2)).     

Quantum mechanical calculations of conformationally relevant 1H and 13C NMR chemical shifts of calixarene systems

[graphs: see text] QM GIAO calculations of 13C and 1H chemical shift values of the ArCH2Ar group have been performed, using the hybrid DFT functional MPW1PW91 and the 6-31G(d,p) basis set, on some representative calixarenes and on a series of simplified calixarene models allowing derivation of chemical shift surfaces versus phi and chi dihedral angles. A good reproduction of experimental data was obtained. The applicability of chemical shift surfaces in the study of calixarene conformational features is illustrated.