Synthesis of Novel Bisphosphonate Inhibitors of Phosphoglycerate Kinase (3-PGK) (E.C.2.7.2.3)

Abstract

Novel, aromatic bisphosphonates have been synthesised as non-systematic analogues of 1,3-bisphosphoglyceric acid (1,3-BPG). These incorporate non-scissile α-halo and α-methylene phosphonates and have submicromolar K _i values for 3 -PGK.     

Self-injection length in La0.7Ca0.3MnO3-YBa2Cu3O7-δ ferromagnet-superconductor multilayer thin films

We have carried out extensive studies on the self-injection problem in barrierless heterojunctions between La_0.7Ca_0.3MnO₃ (LCMO) and YBa₂Cu₃O_7-δ (YBCO) thin films. The heterojunctions were formed in situ by sequentially growing LCMO and YBCO films on 〈100〉 LaAlO₃ (LAO) substrate using a pulsed laser deposition (PLD) system. YBCO micro-bridges with 64 μm width were patterned both on the LAO (control) and LCMO side of the substrate. Critical current, I _c, was measured at 77 K on both the control side as well as the LCMO side for different YBCO film thickness. It was observed that while the control side showed a J _c of ∼ 2 × 10⁶ A/cm², the LCMO side showed about half the value for the same thickness (1800 ?). The difference in J _c indicates that a certain thickness of YBCO has become ‘effectively’ normal due to self-injection. From the measurement of J _c at two different thicknesses (1800 ? and 1500 ?) of YBCO films both on the LAO as well as the LCMO side, the value of self-injection length (at 77 K) was estimated to be ∼ 900 ?. To the authors’ best knowledge, this is the first time that self-injection length has been quantified. A control experiment carried out with LaNiO₃ deposited by PLD on YBCO did not show any evidence of self-injection.     

Modification of porous suspension‐PVC particles by stabilizer‐free aqueous dispersion polymerization of absorbed acrylate monomers

The present study describes modification of porous PVC particles by polymerization of a monomer/crosslinker/peroxide solution absorbed within the PVC particles. The modifying crosslinked polymers include butyl acrylate (BA) crosslinked with ethylene glycol dimethacrylate (EGDMA) and ethylhexyl acrylate (EHA) crosslinked with EGDMA. The monomer solution is blended with the PVC particles by dry‐blending. The monomer absorbed particles are then polymerized in a stabilizer‐free aqueous dispersion‐polymerization. The modified semi‐IPN PVC particles have better stability than the neat PVC particles in packed columns for absorption of halo‐organics from water, etc. The modified semi‐IPN PVC particles are melt processable and thus have the potential of being interesting and useful modified rigid PVC materials. The modified PVC particles characterization includes polymerization yield, non‐extractables and porosity measurements and also morphology and dynamic mechanical behavior (DMTA). PBA and PEHA polymerization has shown high yield levels. The high conversion of BA and EHA within the particle, is partly due to their low solubility in water. The levels of non‐extractable fractions found are indicative of low chemical interaction between the polyacrylate/PVC phases in the particle. The modified PVC particle's porosity levels indicate that BA and EHA partly polymerize within the PVC particles' bulk and partly in the pores as crusts covering the PVC pore surfaces. This finding is supported by SEM observations of unetched and etched freeze fractured surfaces. Higher crosslinking levels of the polyacrylate modification promote compatibility with the PVC particles' bulk. DMTA measurements show two loss modulus peaks for the 0.5%EGDMA blends in the glass transition temperature region, suggesting imcompatibility. However, at 5%EGDMA a single transition is found exhibiting enhanced compatibility owing to the high degree of crosslinking, which prevents phase separation. Copyright © 2002 John Wiley & Sons, Ltd.     

Study of magnetoresistance and conductance of bicrystal grain boundary in La0.67Ba0.33MnO3 thin film

La_0.67Ba_0.33MnO₃ (LBMO) thin film is deposited on a 36.7°C SrTiO₃ bicrystal substrate using laser ablation technique. A microbridge is created across bicrystal grain boundary and its characteristics are compared with a microbridge on the LBMO film having no grain boundary. Presence of grain boundary exhibits substantial magnetoresistance ratio (MRR) in the low field and low temperature region. Bicrystal grain boundary contribution in MRR disappears at temperature T>175 K. At low temperature, I-V characteristic of the microbridge across bicrystal grain boundary is nonlinear. Analysis of temperature dependence of dynamic conductance-voltage characteristics of the bicrystal grain boundary indicates that at low temperatures (T<175 K) carrier transport across the grain boundary in LBMO film is dominated by inelastic tunneling via pairs of manganese atoms and tunneling through disordered oxides. At higher temperatures (T>175 K), magnetic scattering process is dominating. Decrease of bicrystal grain boundary contribution in magnetoresistance with the increase in temperature is due to enhanced spin-flip scattering process.     

Low-lying octupole excitations in 17O

Inelastic electron scattering experiments were performed on a¹⁷O gas target in a range of momentum transfer q = 0.6?1.1fm^?1; B(E3) values for twelve odd-parity levels were obtained from the measured Coulomb form factors. The results are discussed in terms of the weak coupling model.     

Molar extinction coefficients of some carbohydrates in aqueous solutions

Molar extinction coefficients of some carbohydrates viz. l-arabinose (C₅H₁₀O₅), d-glucose (C₆H₁₂O₆), d-mannose (C₆H₁₂O₆), d-galactose (C₆H₁₂O₆), d(-) fructose (C₆H₁₂O₆) and maltose (C₁₂H₂₄O₁₂) in aqueous solutions have been determined at 81, 356, 511, 662, 1173 and 1332 keV by gamma ray transmission method in a narrow beam good geometry set-up. These coefficients have been found to depend upon the photon energy following a 4-parameter polynomial. These extinction coefficients for different sugars having the same molecular formula have same values varying within experimental uncertainty. Within concentration ranges studied, Beer-Lambert law is obeyed very well.     

Azimuthal modulational instability of vortices in the nonlinear Schrödinger equation

We study the azimuthal modulational instability of vortices with different topological charges, in the focusing two-dimensional nonlinear Schrödinger (NLS) equation. The method of studying the stability relies on freezing the radial direction in the Lagrangian functional of the NLS in order to form a quasi-one-dimensional azimuthal equation of motion, and then applying a stability analysis in Fourier space of the azimuthal modes. We formulate predictions of growth rates of individual modes and find that vortices are unstable below a critical azimuthal wave number. Steady-state vortex solutions are found by first using a variational approach to obtain an asymptotic analytical ansatz, and then using it as an initial condition to a numerical optimization routine. The stability analysis predictions are corroborated by direct numerical simulations of the NLS. We briefly show how to extend the method to encompass nonlocal nonlinearities that tend to stabilize such solutions.     

781 Mbit/s photon-counting optical communications using a superconducting nanowire detector

We demonstrate 1550 nm photon-counting optical communications with a NbN-nanowire superconducting single-photon detector. Source data are encoded with a rate-1/2 forward-error correcting code and transmitted by use of 32-ary pulse-position modulation at 5 and 10 GHz slot rates. Error-free performance is obtained with -0.5 detected photon per source bit at a source data rate of 781 Mbits/s. To the best of our knowledge, this is the highest reported data rate for a photon-counting receiver.