Flow injection spectrophotometric method for chloride determination in natural waters using Hg(SCN)(2) immobilized in epoxy resin

A flow injection (FI) spectrophotometric method was proposed for the determination of chloride ion in natural waters. The determination of chloride was carried out by reaction with Hg(SCN)₂ immobilized in an epoxy resin bead in a solid-phase reactor (SPR) and the thiocyanate ions released were determined spectrophotometrically at 480 nm after complexing reaction with Fe(III). The analytical curve for chloride was linear in the concentration range from 5.6 × 10⁻⁵ to 2.2 × 10⁻⁴ mol l⁻¹ with a detection limit of 1.4 × 10⁻⁵ mol l⁻¹. The relative standard deviation (R.S.D.) was 2.2% for a solution containing 2.2 × 10⁻⁴ mol l⁻¹ (n = 10). The simple manifold allows a routine analytical frequency of 100 determinations per hour. The main advantage of the developed method is the 400% reduction of the Hg waste solution generated when compared to conventional methods for chloride determination based on the same spectrophotometric reaction.     

Influence of interparticle interactions on the kinetics of self-assembly and mechanical strength of nanoparticulate aggregates

Computer simulations based on Discrete Element Method have been performed in order to investigate the influence of interparticle interactions on the kinetics of self-assembly and the mechanical strength of nanoparticle aggregates.Three different systems have been considered.In the first system the interaction between particles has been simulated using the JKR (Johnson,Kendall and Roberts) contact theory,while in the second and third systems the interaction between particles has been simulated using van der Waals and electrostatic forces respectively.In order to compare the mechanical behaviour of the three systems,the magnitude of the maximum attractive force between particles has been kept the same in all cases.However,the relationship between force and separation distance differs from case to case and thus,the range of the interparticle force.The results clearly indicate that as the range of the interparticle force increases,the self-assembly process is faster and the work required to produce the mechanical failure of the assemblies increases by more than one order of magnitude.     

Determination of parabens in shampoo using high performance liquid chromatography with amperometric detection on a boron-doped diamond electrode

Methylparaben (MePa), ethylparaben (EtPa) and propylparaben (PrPa) have been widely used, among others, as chemical preservatives in cosmetics, drugs and foods. As these compounds are linked with allergies, dermatitis and estrogenic properties, it is necessary to control the concentration of these substances in different matrices. The aim of this paper are: to evaluate the electrochemical behavior of parabens on the boron-doped diamond (BDD) electrode and the development of a chromatographic method, with electrochemical detection (HPLC-ED), for determination of parabens in shampoo. A BDD (8000 ppm) electrode was adapted in a thin layer mode analytical cell consisting of a stainless steel and a platinum wire as reference and auxiliary electrodes, respectively. Chromatographic separations were obtained with a reversed phase C8 analytical column and a mobile phase of 0.025 mol L⁻¹ disodium phosphate, pH 7.0, and acetonitrile (40:60, v/v), delivered at a flow rate of 1.0 mL min⁻¹. Sample preparation was performed by solid phase extraction using C18 cartridges and acetonitrile for elution. Benzylparaben was employed as internal standard. The HPLC-ED method developed, using the BDD electrode, was validated for the determination of parabens in shampoos and presented adequate linearity (>0.999), in the range of 0.0125-0.500% (w/w), detectability 0.01% (w/w), precision (RSD of 2.3-9.8%) and accuracy (93.1-104.4%) and could be applied for routine quality control of shampoos containing MePa, EtPa and PrPa.     

Performance of slotted pores in particle manufacture using rotating membrane emulsification

This paper addresses the use of different slotted pores in rotating membrane emulsification technology.Pores of square and rectangular shapes were studied to understand the effect of aspect ratio (1-3.5) and their orientation on oil droplet formation.Increasing the membrane rotation speed decreased the droplet size,and the oil droplets produced were more uniform using slotted pores as compared to circular geometry.At a given rotation speed,the droplet size was mainly determined by the pore size and the fluid velocity of oil through the pore (pore fluid velocity).The ratio of droplet diameter to the equivalent diameter of the slotted pore increased with the pore fluid velocity.At a given pore fluid velocity and rotation speed,pore orientation significantly influences the droplet formation rate: horizontally disposed pores (with their longer side perpendicular to the membrane axis) generate droplets at double the rate of vertically disposed pores.This work indicates practical benefits in the use of slotted membranes over conventional methods.     

Boron‐Doped Diamond Electrode Coupled to Liquid Chromatography: Application to Simultaneous Determination of Benzodiazepines

The applicability of boron‐doped diamond (BDD) as a working electrode in an amperometric cell, coupled to HPLC, was demonstrated, for determining benzodiazepines in pharmaceutical preparations. The separation of the benzodiazepines was achieved using a Waters XTerra RP18 column (250×4.6 mm, 5 μm) with a mobile phase sodium phosphate (pH 3.5; 0.10 mol L^?1)‐acetonitrile (65 : 35, v/v) at flow of 1.2 mL min^?1. The measurements were performed in a system 871 Advanced Bioscan (Metrohm) with a BDD (8000 ppm) adapted to the thin layer mode cell. Stainless steel and platinum wire were used as reference and auxiliary electrodes, respectively. The cell was operated in pulse mode, using ?1.9 V as initial potential. The method presented linearity, repeatability and ruggedness and it represents a novel, alternative electroanalytical method for benzodiazepines determination.     

Predicting thermal conductivity of liquid suspensions of nanoparticles (nanofluids) based on rheology

A methodology is proposed for predicting the effective thermal conductivity of dilute suspensions of nanoparticles (nanofluids) based on rheology.The methodology uses the rheological data to infer microstructures of nanoparticles quantitatively,which is then incorporated into the conventional Hamilton-Crosser equation to predict the effective thermal conductivity of nanofluids.The methodology is experimentally validated using four types of nanofluids made of titania nanoparticles and titanate nanotubes dispersed in water and ethylene glycol.And the modified Hamilton-Crosser equation successfully predicted the effective thermal conductivity of the nanofluids.     

Nanoporous metal organic framework materials for hydrogen storage

Hydrogen is expected to play an important role in future transportation as a promising alternative clean energy source to carbon-based fuels.One of the key challenges to commercialize hydrogen energy is to develop appropriate onboard hydrogen storage systems,capable of charging and discharging large quantities of hydrogen with fast enough kinetics to meet commercial requirements.Metal organic framework (MOF) is a new type of inorganic and organic hybrid nanoporous particulate materials.Its diverse networks can enhance hydrogen storage through tuning the structure and property of MOFs.The MOF materials so far developed adsorb hydrogen through weak disperston interactions,which allow significant quantity of hydrogen to be stored at cryogenic temperatures with fast kinetics.Novel MOFs are being developed to strengthen the interactions between hydrogen and MOFs in order to store hydrogen under ambient conditions.This review surveys the development of such candidate materials,their performance and future research needs.     

Flow-injection turbidimetric determination of homatropine methylbromide in pharmaceutical formulations using silicotungstic acid as precipitant reagent

A flow-injection turbidimetric procedure exploiting merging zones is proposed for determining homatropine methylbromide (HMB) in pharmaceutical preparations. The determination is based on the precipitation reaction of homatropine methylbromide with silicotungstic acid in acidic medium to form a precipitate, which was measured at 410 nm. The analytical curve was linear in the HMB concentration range from 8.1 × 10⁻⁵ to 2.2 × 10⁻⁴ mol l⁻¹, with a detection limit of 5.0 × 10⁻⁶ mol l⁻¹. The recoveries ranged from 96 to 103%, the sampling frequency was 70 determinations per hour and relative standard deviations were less than 1.5% (n = 10). The results obtained for commercial formulations using the FIA procedure were in good agreement with those obtained by using a comparative method.