Synthesis of Highly Substituted γ‐Butyrolactones by a Gold‐Catalyzed Cascade Reaction of Benzyl Esters

Easily accessible benzylic esters of 3‐butynoic acids in a gold‐catalyzed cyclization/rearrangement cascade reaction provided 3‐propargyl γ‐butyrolactones with the alkene and the carbonyl group not being conjugated. Crossover experiments showed that the formation of the new C?C bond is an intermolecular process. Initially propargylic–benzylic esters were used, but alkyl‐substituted benzylic esters worked equally well. In the case of the propargylic–benzylic products, a simple treatment of the products with aluminum oxide initiated a twofold tautomerization to the allenyl‐substituted γ‐butyrolactones with conjugation of the carbonyl group, the olefin, and the allene. The synthetic sequence can be conducted stepwise or as a one‐pot cascade reaction with similar yields. Even in the presence of the gold catalyst the new allene remains intact.     

Multiple image encryption using an aperture-modulated optical system

A multiple image cryptosystem based on different apertures in an optical set-up under a holographic arrangement is proposed. The system is a security architecture that uses different pupil aperture mask in the encoding lens to encrypt different images. Based on this approach multiple encryption is achieved by changing the pupil aperture arrangement of the optical system among exposures. In addition to the classical speckle phase mask, the geometrical parameters characterizing the apertures are introduced to increase the system security. Even when an illegal user steals the speckle phase mask, the system cannot be broken into without the correct pupil geometrical parameters. The experimental set-up is based on a volume photorefractive BSO crystal as storing device. Information retrieval is done via a phase conjugation operation. We also have to stress that the multiple storage under this scheme, is only possible with the help of the aperture mask. Simulation and experimental results are further introduced to verify the proposed method.     

Constants of Motion for Several One-Dimensional Systems and Problems Associated with Getting Their Hamiltonians

The constants of motion of the following systems are deduced: a relativistic particle with linear dissipation; a no-relativistic particle with a time explicitly depending force; a no-relativistic particle with a constant force and time depending mass; and a relativistic particle under a conservative force with position depending mass. The Hamiltonian for these systems, which is determined by getting the velocity as a function of position and generalized linear momentum, can be found explicitly at first approximation for the first system. The Hamiltonians for the other systems are kept implicitly in their expressions for their constants of motion.     

Self-interaction-corrected electronegativities and hardness for atoms

Electronegativity χ and hardness η for 54 atoms and their positive and negative ions are calculated by means of self-interaction-corrected DFT including correlation terms. The exchange potential energy is treated by local spin density approximation corrected to account for self-interaction effects as suggested by Rae. The highest occupied orbital eigenvalues for ions are identified to the chemical potential μ^± for positive and negative charged atoms depending upon the developing charge process. Values of χ^±δ and η^± for the different ionic species are given for several values of δ. Average values for 〈χ〉 and 〈η〉 in the sense of Mulliken finite formula for neutral atoms are also tabulated and compared with Mulliken values from experimental data. The agreement among them is almost quantitative.     

Activity measurements in the ternary system NaBr+NaClO4+H2O at 25°C

The activity coefficients of sodium bromide in the ternary system NaBr+NaClO₄+H₂O were determined at 25°C and constant ionic strength of 0.1, 0.5, 1, 2, and 3 mol-kg^?1 from emf of the cell without, liquid junction $$ISE - Na|NaBr(m_A ), NaClO_4 (m_B ), AgCl_{(s)} 1 Ag$$ The experimental activity coefficients were comparatively analyzed by using the Harned, Scatchard, Pitzer and Lim-HOLL treatments. All these methods are adequate for the analysis of the experimental data. The results have been compared with those of Lanier for the system: NaCl+NaClO₄+H₂O. The Gibbs excess energy of mixing was obtained and qualitatively interpreted in terms of ionic interactions.     

Technetium(III), Technetium(II), and Technetium(I) Complexes with Pyridine Ligands. Can Pyridine Coordination Stabilize the Low Oxidation States of Technetium?

The substitution chemistry of TcCl(3)(PPh(3))(2)(CH(3)CN) is rather facile relative to the analogous rhenium complex, since both the chloride and phosphine ligands are easily substituted for various pyridine ligands. Consequently a series of Tc(III) complexes with amine, pyridine, and polypyridyl ligands were prepared and characterized by (1)H NMR and cyclic voltammetry. In addition, the zinc reduction of TcCl(4)(py)(2) in the presence of pyridine results in TcCl(2)(py)(4). Structural and spectroscopic data indicate that this Tc(II) complex exhibits strong metal-pyridine interactions characteristic of low-valent amine complexes of Re(II) and Os(II). For example, a decrease of 0.04 and 0.06 ? is observed for the trans-Tc-N bond length in TcCl(2)(py)(4 )relative to mer-TcCl(3)(pic)(3) and [TcCl(2)(py)(3)(PPh(3))](+), respectively. This ability of pyridine to function both as a strong sigma-donor and moderate pi-acid ligand has resulted in the isolation of technetium complexes in various oxidation states with similar ligand environments. As a result, a structural comparison of [TcCl(2)(py)(3)(PPh(3))](+), TcCl(2)(py)(4), TcCl(tpy)(py)(2), and other known Tc(III) and Tc(II) pyridine complexes is presented. Crystals of [TcCl(2)(py)(3)(PPh(3))]PF(6) are triclinic, with space group P&onemacr;, Z = 2, and lattice parameters a = 12.677(4) ?, b = 13.064(4) ?, c = 13.103(5) ?, alpha = 110.14(3) degrees, beta = 101.12(3) degrees, gamma = 96.61 degrees, V = 1959 ?(3), and R = 0.0615 (R(w) = 0.1148). Crystals of TcCl(2)(py)(4) are tetragonal, with space group I4(1)/acd, Z = 8, and lattice parameters a = 15.641(4) ?, c = 16.845(6) ?, V = 4121 ?(3), and R = 0.0373 (R(w) = 0.0290). Crystals of TcCl(tpy)(py)(2) are orthorhombic, with space group C222(1), Z = 4, and lattice parameters a = 9.359(3) ?, b = 16.088(6) ?, c = 18.367(4) ?, V = 2765 ?(3), and R = 0.0499 (R(w) = 0.0599).     

Turbulence in microfluidics: Cleanroom-free,fast, solventless,and bondless fabrication and application in high throughput liquid-liquid extraction

This paper addresses an important breakthrough in the deployment of ultra-high adhesion strength microfluidic technologies to provide turbulence at harsh flow rate conditions. This paper is only, to our knowledge, the second reporting on the generation of high flow rate-assisted turbulence in microchannels. This flow solves a crucial bottleneck in microfluidics: the generation of high throughput homogeneous mixings. We focused on the fabrication of bulky polydimethylsiloxane (PDMS) microchips (without any interfaces) rather than the laborious surface modifications that were employed in the first reporting about turbulence-assisted microfluidics. The fabrication is cleanroom-free, simple, low-cost, fast, solventless, and bondless requiring only a laboratory oven. More specifically, our method relies on the shaping of a nylon scaffold, cure of PDMS with embedded nylon, and removal of this scaffold. The scaffold was obtained by manually wrapping nylon threads. The withdrawing out of the scaffold was completed in few seconds using only a plier. Such microchannels endured flow rates of up to 60.0 mL min⁻¹ with a strikingly low elastic deformation. The importance in producing turbulence into microscale channels was successfully shown in liquid-liquid extractions. The great energy dissipation rate relative to the turbulence created high throughput and efficient extractions in microfluidics for the first time. The residence time was only 0.01 s at 25.0 mL min⁻¹ (total flow rate of the immiscible phases). In addition, the partition coefficient determined in a single run was similar to that obtained by the conventional batch shake-flask method that was realized in triplicate.     

Determination of Sulfaguanidine in Food and Veterinary Pharmaceuticals by Flow Injection Analysis with Spectrophotometric Detection

This work proposes a flow injection analysis system for sulfaguanidine determination in pharmaceutical and food samples. The method was based on the reaction of sulfaguanidine with nitronium ion to produce a colored complex whose absorbance was measured at 545?nm. The flow injection analysis system’s significant parameters were checked by a fractional factorial design 2^7–2 and optimization by a Doehlert matrix. The flow injection analysis system shows optimum values at 0.28, 2.00, and 0.11% (w/v) for N-naphtil ethylenediamine, ammonium sulfamate, and sodium nitrite concentrations, respectively. The possible interferents present in pharmaceutical and food samples were assessed by a multivariate technique and depicted on probability charts, indicating no significant interferences at the 95% level of confidence interval. The method showed detection and quantification limits of 0.012 and 0.039?mg?L^?1, an analytical frequency of 30 readings h^?1 and precision always lower than 5.0% expressed as the relative standard deviation. The obtained results were in accordance with those obtained by high-performance liquid chromatography.     

Heat-moisture treatment (HMT) on blends from potato starch (PS) and sweet potato starch (SPS)

Journal of Thermal Analysis and Calorimetry - Samples of potato starch (PS), sweet potato starch (SPS) and their binary mixtures, with moisture levels of 10, 15 and 20% (db), were submitted to...