Preparation and Characterization of Activated Carbon from Microwave and Conventional Heated Almond Shells Using Phosphoric Acid Activation

Activated carbon production from almond shells using phosphoric acid activation agent was achieved by applying both conventional heating and microwave heating in succession. The morphology and surface properties of activated carbon were studied using thermogravimetric and differential gravimetric analysis, Fourier-transform infrared spectroscopy, scanning electron microscopy, and Brunauer–Emmett–Teller analysis. A surface area of 1128 m²/g was achieved by optimizing the microwave power (500?W), microwave application time (15?minutes), conventional heating time (45?minutes), conventional heating temperature (500?°C), and the phosphoric acid:sample ratio (0.7:1). An adsorption capacity of methylene blue of 148?mg/g and an iodine value of 791?mg/g was obtained for the prepared activated carbon.     

Preparation and characterization of activated carbon from pine cone by microwave-induced ZnCl2 activation and its effects on the adsorption of methylene blue

In this work, activated carbon prepared from pine cone (PCAC) with ZnCl₂ as an activation agent under microwave radiation was investigated. The activation step was performed at the microwave input power of 400 W and radiation time of 5 min. The properties of activated carbon were characterized by N₂ adsorption Brunauer–Emmett–Teller (BET), scanning electron microscopy and Fourier transform infrared spectroscopy. Results showed that the BET surface area, Langmuir surface area, and total pore volume of PCAC were 939, 1,486 m²/g and 0.172 cm³/g, respectively. Adsorption capacity was demonstrated by the iodine numbers. The adsorptive property of PCAC was tested using methylene blue dye. Equilibrium data was best fitted by the Langmuir isotherm model, showing a monolayer adsorption capacity of 60.97 mg/g. The pseudo-first- and pseudo-second-order kinetic models were examined to evaluate the kinetic data, and the rate constants were calculated. Adsorption of the dyes followed pseudo-first order kinetics. Thermodynamic parameters such as free energy, enthalpy and entropy of dye adsorption were obtained.     

Principal functions of non-selfadjoint matrix Sturm-Liouville equations

In this paper we investigate the principal functions corresponding to the eigenvalues and the spectral singularities of the boundary value problem

     

Subplanes of projective planes of order 121

We determine orbit representatives of all proper subplanes generated by quadrangles of a Veblen-Wedderburn (VW) plane Π of order 11² and the Hughes plane Σ of order 11² under their full collineation groups. In Π, there are 13 orbits of Baer subplanes all of which are desarguesian and approximately 3000 orbits of Fano subplanes. In Σ, there are 8 orbits of Baer subplanes all of which are desarguesian, 2 orbits of subplanes of order 3 and at most 408,075 distinct Fano subplanes. This work was motivated by the well-known question: “Does there exist a non-desarguesian projective plane of prime order?” The question remains unsettled.     

Systematic Modulation of Thiol Functionalities in Inexpensive Porous Polymers for Effective Mercury Removal

Through accumulation, mercury contamination in aquatic systems still poses serious health risks despite the strict regulations on drinking water and industrial discharge. One effective strategy against this is adsorptive removal, in which a suitably functionalized porous material is added to water treatment protocols. Thiol (SH) group-grafted structures perform commendably; however, insufficient attention is paid to the cost, scalability, and reusability or how the arrangement of sulfur atoms could affect the Hg^II binding strength. We used an inexpensive and scalable porous covalent organic polymer (COP-130) to systematically introduce thiol functional groups with precise chain lengths and sulfur content. Thiol-functionalized COP-130 demonstrates enhanced wettability and excellent Hg^II uptake of up to 936 mg g⁻¹, with fast kinetics and exceptionally high selectivity. These Hg adsorbents are easily regenerated with HCl and can be used at least six times without loss of capacity even after treatment with strong acid, a rare performance in the domain of Hg-removal research.     

Noninvasive functionalization of polymers of intrinsic microporosity for enhanced CO(2) capture

Modifying sorbents for the purpose of improving carbon dioxide capture often results in the loss of surface area or accessible pores, or both. We report the first noninvasive functionalization of the polymers of intrinsic microporosity (PIMs) where inclusion of the amidoxime functionality in PIM-1 increases carbon dioxide capacity up to 17% and micropore surface area by 20% without losing its film forming ability.     

The interaction of an azo compound with a surfactant and ion pair adsorption to solid phases

The adsorption of SPADNS (trisodium salt of 2-(p-sulfophenylazo)-1,8-dihydroxynaphthalene-3,6-disulfonic acid) onto resins XAD 2, XAD 7 and silica gel was studied in the presence and in the absence of the cationic surfactant CTAB (cetyl trimethylammonium bromide). At a ratio of 2.5 CTAB to 1 SPADNS, the surfactant caused a marked increase in SPADNS adsorption. The experimental results for adsorption versus time were applied on the basis of three kinetic models (pseudo-first-order Lagergren, pseudo-second-order, and intraparticle diffusion). The interaction between CTAB and SPADNS was investigated using spectrophotometric, conductometric, and computational techniques. Theoretical results point to the formation of an ion pair between CTAB and SPADNS that influences the solution spectra, in agreement with conductometric and spectrophotometric data.     

Application of wavelet transform to hologram analysis: three-dimensional location of particles

The wavelet analysis provides an efficient tool in numerous signal-processing problems and has been implemented in optical processing techniques, such as in-line holography. When the diffraction pattern recorded on a hologram is analyzed by means of a wavelet transform, the 3-D location of small particles can be determined very accurately. The diffraction process can, in fact, be interpreted as a convolution with a family of wavelet functions, or, merely, as a wavelet transform. The scale parameter of the wavelet family is related to the axial distance z that the wave propagates. The original field is then reconstructed by searching for the optimum value of the scale parameter which produces a maximum of the wavelet transform modulus. The technique proposed is implemented and experimental results are presented.     

Partitioning 3‐arcs into Steiner Triple Systems

In this article, it is shown that there is a partitioning of the set of 3‐arcs in a projective plane of order three into nine pairwise disjoint Steiner triple systems of order 13.     

Microchip extraction of catecholamines using a boronic acid functional affinity monolith

We report on the development of a rapid enzyme logic gate-based electrochemical assay for the assessment of traumatic brain injury (TBI). The concept harnesses a biocatalytic cascade that emulates the functionality of a Boolean NAND gate in order to process relevant physiological parameters in the biochemical domain. The enzymatic backbone ensures that a high-fidelity diagnosis of traumatic brain injury can be tendered in a rapid fashion when the concentrations of key serum-based biomarkers reach pathological levels. The excitatory neurotransmitter glutamate and the enzyme lactate dehydrogenase were used here as clinically-relevant input TBI biomarkers, in connection to the low-potential detection of the NADH product in the presence of methylene green at a glassy carbon electrode. A systematic optimization of the gate and the entire protocol has resulted in the effective discrimination between the physiological and pathological logic levels. Owing to its robust design, the enzyme-based logic gate mitigates potential interferences from both physiological and electroactive sources and is able to perform direct measurements in human serum samples. Granted further detailed clinical validation, this proof-of-concept study demonstrates the potential of the electrochemical assay to aid in the rapid and decentralized diagnosis of TBI.