UTILIZATION OF TOOLS FOR SUCCESSFUL. TROUBLESHOOTING OF STRUCTURAL PROBLEMS

A structural failure problem was solved using an integrated and iterative program of testing and analysis. The steps taken in solving the problem were: analytical calculations; operational testing; qualifications of analytical results; problem identification; design of corrective action; and confirmatory testing.     

The importance of dye chemistry and TiCl(4) surface treatment in the behavior of Al(2)O(3) recombination barrier layers deposited by atomic layer deposition in solid-state dye-sensitized solar cells

Atomic layer deposition (ALD) was used to fabricate Al(2)O(3) recombination barriers in solid-state dye-sensitized solar cells (ss-DSSCs) employing an organic hole transport material (HTM) for the first time. Al(2)O(3) recombination barriers of varying thickness were incorporated into efficient ss-DSSCs utilizing the Z907 dye adsorbed onto a 2 μm-thick nanoporous TiO(2) active layer and the HTM spiro-OMeTAD. The impact of Al(2)O(3) barriers was also studied in devices employing different dyes, with increased active layer thicknesses, and with substrates that did not undergo the TiCl(4) surface treatment. In all instances, electron lifetimes (as determined by transient photovoltage measurements) increased and dark current was suppressed after Al(2)O(3) deposition. However, only when the TiCl(4) treatment was eliminated did device efficiency increase; in all other instances efficiency decreased due to a drop in short-circuit current. These results are attributed in the former case to the similar effects of Al(2)O(3) ALD and the TiCl(4) surface treatment whereas the insulating properties of Al(2)O(3) hinder charge injection and lead to current loss in TiCl(4)-treated devices. The impact of Al(2)O(3) barrier layers was unaffected by doubling the active layer thickness or using an alternative ruthenium dye, but a metal-free donor-π-acceptor dye exhibited a much smaller decrease in current due to its higher excited state energy. We develop a model employing prior research on Al(2)O(3) growth and dye kinetics that successfully predicts the reduction in device current as a function of ALD cycles and is extendable to different dye-barrier systems.     

Vortex lattice transitions in YNi2B2C

We have performed extensive small-angle neutron scattering (SANS) diffraction studies of the vortex lattice in single crystal YNi₂B₂C for B‖c. High-resolution SANS, combined with a field-oscillation vortex lattice preparation technique, allows us to separate Bragg scattered intensities from two orthogonal domains and accurately determine the unit cell angle, β. The data suggest that upon increasing field there is a finite transition width where both low- and high-field distorted hexagonal vortex lattice phases, mutually rotated by 45°, coexist. The smooth variation of diffracted intensity from each phase through the transition corresponds to a redistribution of populations between the two types of domains.     

On the autocorrelation functions of wind generated ocean waves

Zusammenfassung Die statistische Beschreibung der Schwingungsweiten von winderzeugten Ozeanwellen mittels stationärer Gaußscher Prozesse ist ein Gegenstand moderner Forschung. Beträchtliche Anstrengungen sind gemacht worden, um das Energieverteilungsspektrum als eine Funktion der Schwingungszahl darzustellen, wobei mehrere Ausdrücke dafür vorgeschlagen worden sind. Es sind jedoch viel weniger Bemühungen gemacht worden, um die Auto-Korrelationsfunktion des Vorgangs abzuleiten. Da die üblichen Residuen-Methoden nicht geeignet sind, müssen besondere Verfahren angewandt werden, um diese Funktionen zu erhalten. Die Absicht dieses Artikels ist es über diese Verfahren zu berichten und die Auto-Korrelationsfunktion mittels Fourier-Kosinus-Transformationen des Neumann- und Pierson-Moskowitz-Spektrums abzuleiten.     

Effect of incident shock wave strength on the decay of Richtmyer–Meshkov instability-introduced perturbations in the refracted shock wave

The effect of incident shock wave strength on the decay of interface introduced perturbations in the refracted shock wave was studied by performing 20 different simulations with varying incident shock wave Mach numbers (M ~ 1.1? 3.5). The analysis showed that the amplitude decay can be represented as a power law model shown in Eq.7, where A is the average amplitude of perturbations (cm), B is the base constant (cm^?(E?1), S is the distance travelled by the refracted shockwave (cm), and E is the power constant. The proposed model fits the data well for low incident Mach numbers, while at higher mach numbers the presence of large and irregular late time oscillations of the perturbation amplitude makes it hard for the power law to fit as effectively. When the coefficients from the power law decay model are plotted versus Mach number, a distinct transition region can be seen. This region is likely to result from the transition of the post-shock heavy gas velocity from subsonic to supersonic range in the lab frame. This region separates the data into a high and low Mach number region. Correlations for the power law coefficients to the incident shock Mach number are reported for the high and low Mach number regions. It is shown that perturbations in the refracted shock wave persist even at late times for high incident Mach numbers.     

Flow phenomena in floppy tubes

Collapsible tubes, which occur all over the body, have unique properties from the point of view of both physics and physiology. A brief review is attempted of first the basic observable properties, followed by simple theory to explain the steady-flow aspects and an overview of the somewhat more complex theories for unsteady flow, in particular the flow-induced oscillations. The experimental evidence from laboratory studies is reviewed with particular emphasis on the dynamical system aspects. A final section looks at the current position and prospects.     

Magnetism and superconductivity in ErNi2B2C

We have performed a series of neutron diffraction experiments from the magnetic order and the vortex lattice in single crystal ErNi₂B₂C. The incommensurate magnetic structure develops additional even harmonics below the ‘ferromagnetic’ ordering temperature, T _F of 2.3 K. This feature and the existence of rods of diffuse scattering suggest the development of ferromagnetic microdomain walls. The magnetic structure is very sensitive to the application of a magnetic field with changes in modulation vector and harmonic content. Studies of the vortex lattice show the presence of a 45° reorientation transition and a distorted hexagonal to square transition as a function of applied field. Further distortions of the vortex lattice occur at T _N, but no changes are seen at T _F.