Synthesis of functionalized acetophenones by [3 + 3] cyclizations of 1,3-bis-silyl enol ethers with 2-acetyl-3-silyloxyalk-2-en-1-ones

The TiCl₄ mediated cyclization of 1,3-bis-silyl enol ethers with 2-acetyl-1-silyloxybut-1-en-3-one and 3-acetyl-4-silyloxypent-3-en-2-one, readily prepared from 3-formyl(acetylacetone) and triacetylmethane, afforded a variety of functionalized acetophenones.     

The Mechanism of Photochemical Release of Nitric Oxide from S-Nitrosoglutathione

Abstract— Laser flash photolysis of S-nitroso complexes of glutathione (GSNO) and bovine serum albumin (BSANO) via excitation at 355 nm has been used to investigate the photogeneration of nitric oxide (NO) and subsequent radical reactions. In the case of GSNO, liberation of NO was confirmed by its oxidation of oxyhemoglobin to met hemoglobin. Initial NO release is via homolytic cleavage of the S-N bond to produce the glutathione thiyl radical, GS, which can subsequently react with (a) ground-state GSNO (k= 1.7 × 10⁹M^?1/i> s^?1) to yield additional NO and oxidized glutathione, GSSG; and (b) oxygen (k= 3.0 × 10⁹M^?1 s^?1) to give the glutathione peroxy radical, GSOO, which subsequently reacts with ground-state GSNO (k= 3.8 × 10⁸M^?1 s^?1), also producing additional NO and GSSG. The relative concentrations of oxygen and GSNO in the system determine the major pathway for removal of G'. These secondary reactions occur at such high rates that they preclude radical recombination under low-intensity irradiation conditions. The quantum yield of overall loss of GSNO thus varies with both GSNO and oxygen concentrations; a value of 0.66 was determined for an aerated solution of GSNO (0.86 mM). In the case of GSNO, therefore, generation of NO is not due solely to homolysis of the S-N bond; secondary reactions of the radicals formed lead to further NO liberation. In rationalizing the known phototoxicity of GSNO, possible contributions from thiyl and thiyl-derived radicals should be considered. In contrast to GSNO, direct excitation of BSANO (containing one bound NO group per molecule) led to photodecomposition with a quantum yield of 0.09 but no evidence was obtained for liberation of NO into the bulk medium.     

Modeling of asymmetric membrane formation by dry-casting method

Many polymeric membranes are produced by phase inversion technique invented by Loeb and Sourirajan in 1962. The dry-casting method is one of the major phase inversion techniques in which a homogeneous polymer solution consisting of solvent(s) and nonsolvent(s) is cast on a support and then evaporation of the casting solution takes place under convective conditions. In this paper, we model membrane formation by the dry-casting method. The model takes into account film shrinkage, evaporative cooling, coupled heat, and mass transfer and incorporates practical and reliable diffusion theory as well as complex boundary conditions especially at the polymer solution/air interface. The predictions from the model provide composition paths, temperature, and thickness of the solution. By plotting the composition paths on the ternary phase diagram, we ascertain the general structural characteristics of the membranes prepared from particular casting conditions. The predictive ability of the model was evaluated by comparing the results with the experimental data obtained from gravimetric measurements for cellulose acetate (CA)–acetone–water system. In an attempt to illustrate the importance of diffusion formalism on the predictions, recently proposed multicomponent diffusion theory and its simplified forms were utilized in the model. The computational results show that the critical factor for capturing the accurate behavior of membrane formation is the diffusion formalism utilized in the model.     

Hydrolytic polycondensation of alkoxysilanes and modification of polymerization reactions

Polymers having oxide network chains are produced by hydrolytic polycondensation of metal alkoxides and alkoxysilanes. Molecular morphology and molecular size distribution of these inorganic polymers are strongly affected by certain nonchemical parameters. Included among these parameters is the molecular separation of interacting species during the polymerization. There is strong evidence that the molecular size expansion occurs by two distinct processes: initially by a gradual “growth” process, and later by “recombination” of high-molecular weight species. The later process often leads to a bi-modal molecular size distribution. The concentration of water-rich siloxane solutions leads to significant molecular size expansion by further oxide network formation. No similar polymer size growth occurs during the concentration of alcohol based solutions. This difference in the polymeric activities can be related to the difference in the terminal bond under the two different conditions.     

Reactions of 1S, 1D,and 3P carbon atoms with water. Oxygen abstraction and intermolecular formaldehyde generation mechanisms; An MCSCF study

Reactions of singlet and triplet carbon atoms with water are explored theoretically using CASSCF–MCQDPT2, CCSD, and DFT methodologies. The ¹S carbons are found to be unreactive. Depending on the carbon atom generation method and the reaction medium, gas‐phase C(³P) attacking water may generate CO and atomic hydrogen as the end products. Reaction paths of the C(¹D) + H₂O system are complicated due to the involvement of two reactive potential energy surfaces with branchings occurring along each. Modifications in product distributions for reactions taking place in condensed phases are elaborated. The decisive reaction conditions, under which the oxygen abstraction and intermolecular formaldehyde generation dominate, are suggested to clarify the discrepancy related with experimental CO observation. The findings are consistent with available experimental data on this system. Oxygen abstraction and intermolecular formaldehyde generation mechanisms suggested here are capable of serving as models for similar reactions of alcohols. © 2011 Wiley Periodicals, Inc. Int J Quantum Chem, 2012     

Pharmacological properties of dicyanidoaurate(I)-based complexes: characterization and single crystal X-ray analysis

The synthesis of three bimetallic cyanido complexes with edbea [2,2′-(ethylenedioxy)bis(ethylamine)] ligand is reported. [Ni^II(μ-edbea)₂{Au(μ-CN)₂}₂]_n (1), [{Cu^II(edbea)}₂{Au(μ-CN)₂}₄]_n (2) and [Cd^II(edbea)₂][Au(CN)₂]₂·H₂O (3) were fully characterized by elemental, infrared, XRD (3), ESI-MS and thermal analysis. The DNA/BSA binding properties of these complexes were evaluated by spectrophotometric titration, fluorometric ethidium bromide kinetics, and DNA electrophoresis studies and their partially minor groove binding mode between the base pairs of DNA and electrostatic interaction between the amino acid residues of BSA were explained. The complexes were tested for their pharmacological properties. These molecules had excellent in vitro antiproliferative activity and also exhibited a strong tumor inhibiting effect against HT29, HeLa, C6 and Vero cell lines. These complexes had metastatic features as they are able to reduce cell migration activity and suppress tumor growth in vitro. Analysis of the DNA topoisomerase I relaxing activity indicates that the complexes do not inhibit topoisomerase I which regulates the topological states of the DNA double helix during DNA processing reactions. The TUNEL and DNA laddering assay results indicated that these compounds may destroy cell maintenance by triggering apoptosis. Immunohistochemistry staining analysis demonstrated that these complexes significantly decreased the expression of Bcl-2 in HeLa and HT29 cells while increasing the expression of P53 levels. Overall, the potent antiproliferative activity, low cytotoxic effect, good solubility, and micro molar range dosage observed for these complexes emphasizes their potential as anticancer drug candidates.     

Natural and artificial radioactivity levels of greenhouse soils and relations with soil properties

Journal of Radioanalytical and Nuclear Chemistry - In this study, natural (226Ra, 232Th, 40K) and artificial (137Cs) radionuclide activity concentration levels of 63 greenhouse soils collected from...     

Metallo Phthalocyanines bearing 2‐Isopropyl‐6‐methylpyrimidin‐4‐yloxy Substituents: Synthesis,Characterization, Aggregation Behavior,Antioxidant and Antibacterial Activity,and Electronic Properties

A novel phthalonitrile derivative bearing 2‐isopropyl‐6‐methylpyrimidin‐4‐yloxy substituents at peripheral positions was synthesized by a nucleophilic substitution reaction. Metallophthalocyanines were obtained from the reaction of the novel phthalonitrile with metal Zn, Cu, Co, and Ni salts. The characterization of the compounds was performed using elemental analysis as well as UV/Vis, FT‐IR, and ¹H‐NMR spectroscopy. The aggregation behaviors of phthalocyanine complexes were also investigated. These metallophthalocyanines do not show any aggregation behavior between 10^–4–10^–6 M concentration range in THF. The antioxidant activities of the synthesized compounds were evaluated using three different tests: 2, 2‐diphenyl‐1‐picrylhydrazyl (DPPH) radical scavenging, metal chelating activity, and reducing power assays. All the compounds exhibited various antioxidant activities. In addition, antimicrobial activity of the compounds was tested over four gram positive and two gram negative bacteria. Moreover, the ground‐state geometries of the complexes were optimized using density functional theory (DFT) methods at B3LYP/6‐31G(d, p) level in order to obtain information about the 3D arrangements and electronic structure.     

Convergence properties and practical estimation of the probability of rank reversal in pairwise comparisons for multi-criteria decision making problems

In this paper, we address the impact of uncertainty introduced when the experts complete pairwise comparison matrices, in the context of multi-criteria decision making. We first discuss how uncertainty can be quantified and modeled and then show how the probability of rank reversal scales with the number of experts. We consider the impact of various aspects which may affect the estimation of probability of rank reversal in the context of pairwise comparisons, such as the uncertainty level, alternative preference scales and different weight estimation methods. We also consider the case where the comparisons are carried out in a fuzzy manner. It is shown that in most circumstances, augmenting the size of the expert group beyond 15 produces a small change in the probability of rank reversal. We next address the issue of how this probability can be estimated in practice, from information gathered simply from the comparison matrices of a single expert group. We propose and validate a scheme which yields an estimate for the probability of rank reversal and test the applicability of this scheme under various conditions. The framework discussed in the paper can allow decision makers to correctly choose the number of experts participating in a pairwise comparison and obtain an estimate of the credibility of the outcome.     

Technological significance of sol-gel process and process-induced variations in sol-gel materials and coatings

A significant aspect of sol-gel technology is the capability it provides to affect the substructure of materials by controlling the nature and the kinetics of chemical reactions. This capability allows us to produce novel materials, design unique molecular and pore morphologies, circumvent high-temperature reactions, and modify material properties. The modifications include strongly thermodynamic-dependent high-temperature properties such as sintering, crystallization, and viscosity in glass and ceramic materials. A particularly exciting area for investigation is the optical-electronic field, where a significant dependence of electro-optical properties and photosensitivity on process-induced molecular-structural variations occurs. Understanding the basis for the creation of structural variations in sol-gel processes should have significant impact on the technologies and systems that use these materials. In this article, some fundamental aspects of alkoxide-based, sol-gel processes and thermochemical bases for process-induced structural variates are discussed.