X-ray determination of the mean amplitudes of vibration and debye temperatures of some rare earth monochalcogenides

The x-ray diffraction intensities of Bragg reflections have been measured at room temperature for thulium selenide, samarium sulphide, samarium selenide and samarium telluride. On the basis of a common amplitude approximation, the Debye-Waller factor, the mean amplitude of vibration and the Debye temperature have been evaluated. The values of the Debye temperatures and mean amplitudes of vibration are 176±16°K, 0·185 ± 0·017 Å (TmSe), 155 ± 7°K, 0·244 ± 0·012 Å (SmS), 153 ± 14°K, 0·221 ± 0·020 Å (SmSe) and 151 ± 20°K, 0·204 ± 0·027 Å (SmTe).     

A feasibility study on the use of Li(4)V(3)O(8) as a high capacity cathode material for lithium-ion batteries

Li(4)V(3)O(8) materials have been prepared by chemical lithiation by Li(2)S of spherical Li(1.1)V(3)O(8) precursor materials obtained by a spray-drying technique. The over-lithiated vanadates were characterised physically by using scanning electron microscopy (SEM) and X-ray diffraction (XRD), and electrochemically using galvanostatic charge-discharge and cyclic voltammetry measurements in both the half-cell (vs. Li metal) and full-cell (vs. graphite) systems. The Li(4)V(3)O(8) materials are stable in air for up to 5 h, with almost no capacity drop for the samples stored under air. However, prolonged exposure to air will severely change the composition of the Li(4)V(3)O(8) materials, resulting in both Li(1.1)V(3)O(8) and Li(2)CO(3). The electrochemical performance of these over-lithiated vanadates was found to be very sensitive to the conductive additive (carbon black) content in the cathode. When sufficient carbon black is added, the Li(4)V(3)O(8) cathode exhibits good cycling behaviour and excellent rate capabilities, matching those of the Li(1.1)V(3)O(8) precursor material, that is, retaining an average charge capacity of 205 mAh g(-1) at 2800 mA g(-1) (8C rate; 1C rate means full charge or discharge of a battery in one hour), when cycled in the potential range of 2.0-4.0 V versus Li metal. When applied in a non-optimised full cell system (vs. graphite), the Li(4)V(3)O(8) cathode showed promising cycling behaviour, retaining a charge capacity (Li(+) extraction) above 130 mAh g(-1) beyond 50 cycles, when cycled in the voltage range of 1.6-4.0 V, at a specific current of 117 mA g(-1) (C/3 rate).     

Disordered carbon nanofibers/LiCoPO<Subscript>4</Subscript> composites as cathode materials for lithium ion batteries

LiCoPO₄-coated disordered carbon nanofibers (CNFs/LiCoPO₄) were obtained by a sol–gel method, using triethyl phosphite or triethyl phosphate as the phosphorous source. The crystal structure of the products was analyzed by X-ray powder diffraction, while morphology was studied using scanning electron microscopy, transmission electron microscopy, Auger electron spectroscopy and X-ray photoelectron spectroscopy. Optimal synthesis conditions for the CNFs/LiCoPO₄ in light of the best electrochemical performance are discussed. The best discharge capacity 105 mAh/g (or ca. 63% of the theoretical capacity) shows the material with 40% CNFs/LiCoPO₄ and addition coating by carbon black. This composition has a best purity of active materials and point coverage of CNFs. The X-ray photoelectron C1s spectra of the CNFs surface without and with sputter erosion show enhancement of C–O bonds at the fiber surface, which does not influence significantly electrochemical behavior of the composite materials.     

帕隆藏布流域堆积体边坡的工程地质特征及稳定性评价

位于藏东南的帕隆藏布流域,处在东喜马拉雅构造结的北缘,是新构造强烈隆升区,断层、褶皱等地质构造发育。在青藏高原隆升及气候变化等内外动力作用下,研究区内堆积体分布广泛,具有独特的工程地质特征并成为该区内地质灾害的主要物源。由于河流的下切及川藏公路的修建,形成了许多高陡的堆积体边坡,以冰碛边坡最为典型。由于其特殊的物源特征及形成过程,冰碛物具有粒度分布范围广、粗粒含量多等与其他沉积物不同的粒度特征。冰碛物粒度分布范围广的特征,导致随着研究尺度的不同,其结构特征也不相同,具有明显的尺度效应。冰碛土的力学强度一般强于其他堆积体,但受不同粒径颗粒的含量及分布、形成时代的影响,其力学特征也有所差异。作者对川藏公路沿线部分典型的剖面进行了量测,所量测的剖面虽然只是整个斜坡的一部分,与经验数据相比,仍表现出高陡的特征,而且很多边坡在既高且陡的形态下仍能保持稳定。本文以极限平衡理论为基础,采用多种方法对这类边坡的稳定性进行计算分析,求出边坡的安全系数。考虑各种地震烈度下边坡的稳定性,得出这些边坡的安全系数与地震加速度具有严格的指数相关关系。     

Two-step process and fatigue in Li<Subscript><Emphasis Type="BoldItalic">x</Emphasis></Subscript>CrMnO<Subscript>4</Subscript> as positive electrode material for lithium ion batteries

The electrochemical behavior and structural changes of the positive electrode material LiCrMnO₄ are studied for different end-of-charge voltages. A potentiostatic intermittent titration technique (PITT) experiment performed up to 5.2 V shows three oxidative peaks. Cells charged to 4.88 V, which corresponds to the minimum between the second and the third oxidative peak, show 89% of capacity retention for the 60th cycle. Compared to that only 23% of capacity are preserved in the 60th cycle when the cell is charged to 5.2 V. The structural analysis by Rietveld refinement shows that for the former case, the amount of structural defects is low and their formation is reversible, while the defect amount is significantly higher for the latter case and the defect formation is only partially reversible. Paper presented at the 11th EuroConference on the Science and Technology of Ionics, Batz-sur-Mer, Sept. 9–15, 2007     

Dose–Response Relationship of Photobiomodulation Therapy on Matrix Metalloproteinase in Healing Dynamics of Diabetic Neuropathic Ulcers—An in vivo Study

Individuals with diabetic foot ulcers have overlapped the inflammatory, proliferative and remodeling phase, making the tissue vulnerable to delayed healing responses. We aimed to establish the dose–response relationship of photobiomodulation therapy of different doses and matrix metalloproteinases in the healing dynamics of diabetic neuropathic ulcers. Diabetes was induced in 126 Albino Wistar rats, and neuropathy was induced to the hind paw by a sciatic nerve injury method. An excisional wound was created on the neuropathy-induced leg. Photobiomodulation therapy of dosages 4, 6, 8, 10, 12 and 15 J cm⁻² and wavelength 655 nm and 808 nm was irradiated. Photobiomodulation therapy of dosages 4, 6 and 8 J cm⁻² showed better wound healing properties with optimized levels of matrix metalloproteinases-1 and 8. We observed a strong dose response in the experimental group treated with 6 and 8 J cm⁻². The findings from the present study conclude that photobiomodulation therapy of dosages 4, 6 and 8 J cm⁻² is suggestive of usefulness in diabetic neuropathic ulcer healing. Markers like matrix metalloproteinases may give a clear direction on response to the therapy. Based on the findings from the present study, we recommend to validate the findings for safety and efficacy in future through human prospective randomized controlled clinical trials.     

Crystal and magnetic structures of electrochemically delithiated Li1−xCoPO4 phases

Precise structural data have been determined from a combined Rietveld refinement, based on neutron and X-ray powder diffraction data simultaneously, for the three phases LiCoPO₄, Li_zCoPO₄ with a specific intermediate Li-content z = 0.60(10) and CoPO₄, which are obtained by electrochemical Li-extraction from LiCoPO₄. All three phases are isopointal. Therefore, the transitions between these phases are necessarily of first order, in agreement with their observed coexistence. The same collinear antiferromagnetic structures with magnetic moments nearly parallel to the [010] direction are observed for LiCoPO₄ and Li_zCoPO₄, but with a significantly higher Néel temperature of 76 K for the latter compound in comparison with 23 K for LiCoPO₄. Olivine-type CoPO₄ can only be prepared from LiCoPO₄ by delithiation and its physical properties were investigated for the first time. An antiferromagnetic arrangement along the [100] direction is observed for CoPO₄ with an additional weak ferromagnetic component along the [001] direction (magnetic space group Pn′m′a and T_C = 45 K). The magnetic moment of 3.1(2) μ_B per Co-ion indicates a mainly high-spin state for Co³⁺ in the octahedral coordination of CoPO₄, which is exceptional and probably the first example in a phosphate. The easy axes and the magnetic exchange interactions between Co-ions change dramatically with the Co²⁺ ? Co³⁺ transition. A continuous change of the formal oxidation state of a transition element by electrochemical Li-extraction and a quasi-continuous in situ observation of the resulting magnetic structure by neutron diffraction appear feasible.     

W1{infty}-convergence of the discrete free boundary for obstacle problems

We examine the discrete free boundaries arising from a finiteelement discretization of a variational inequality. We giveL error bounds for the Hausdorff distance of the discrete andtrue free boundary, as well as for the normals. The theoreticalresults are confirmed by numerical experiments in two and threedimensions.     

Electrochemical and structural study of LiCoPO<Subscript>4</Subscript>-based electrodes

LiCoPO₄ samples were synthesized by two different techniques (high-temperature solid-state reaction and lower-temperature synthesis using NH₄CoPO₄·H₂O as precursor) and tested as cathode materials for 5-V lithium batteries. An irreversible lithium deinsertion was observed for the high-temperature sample. In contrast, the application of lower-temperature synthesis led to a significant improvement of the lithium storage reversibility. Different delithiation mechanisms in LiCoPO₄ were found for the samples obtained by different synthetic techniques. The nature of capacity fading during cycling of the cells is discussed.