Yttrium aluminate crystals for slabs

The methods of growing YAG:Nd crystals with a flat interface and YAP:Nd crystals with a sharp conical interface are described. The form of the interface was controlled by the He and H₂O content in the reducing atmosphere composed mainly of Ar and H₂ as well as by axial temperature gradient above the melt level. The crystals of 120–180 mm in length were machined to the high-quality slabs.     

Supercritical fluid extraction combined with solid phase extraction as sample preparation technique for the analysis of β-blockers in serum and urine

A method is developed for the determination of β-blockers in serum and urine at levels of 0.5 μg/mL. The technique uses a combination of solid phase extraction (SPE) with in situ derivatization and supercritical fluid extraction (SFE) with subsequent gas chromatography mass spectrometry. The optimization of the SFE step shows that a static extraction period can be eliminated. The method gives good linearity (r = 0.991–0.999) and repeatability in the concentration range of 0.5 to 5 μg/mL. Relative standard deviations for oxprenolol, propanolol and metoprolol were less than 5% in serum and 5–11% in urine. Received: 23 May 1997 / Revised: 28 July 1997 / Accepted: 5 August 1997     

Alginate Properties and Heavy Metal Biosorption by Marine Algae

The physical properties of the alginate component in four different brown seaweeds (Sargassumfluitans, Ascophyllum nodosum, Fucus vesiculo-sus, andLaminaria japonica) were characterized using potentiometric titration,¹³C-nuclear magnetic resonance (NMR), chemical analysis, and viscosity measurements. The heavy metal binding capacities of the corresponding seaweeds were directly proportional to their respective total carboxyl group content, and related to the electronegativity of the elements investigated (Ca, Zn, Cd, Cu, and Pb). The uronic acid composition or sequence of the alginate component did not affect the metal uptake properties of the biosorbents studied here. However, the alginate leaching owing to its solubilization by Na ions was observed to decrease with increasing intrinsic viscosity of the extracted alginate, related to its molecular weight, and with increasing apparent acidic dissociation constant, related to the alginate density inside the biomass.     

Towards rod-shaped molecules based on the twelve-vertex ferratricarbollides

The compounds with a single and double -CH₂C₆H₄CH₂- spacer, [CpFeC₃B₈H₁₀-NH-CH₂C₆H₄CH₂-NH-C₃B₈H₁₀FeCp] and [CpFeC₃B₈H₁₀-N-(CH₂C₆H₄CH₂)₂-N-C₃B₈H₁₀FeCp], represent the first example of designed shaping by extremely stable cyclopentadienyl-ferratricarbollide (CpFeTCB) cages into rigid molecular constructions approaching linear arrangement.     

Polymer melt flow measurements by laser doppler velocimetry

Laser Doppler velocimetry (LDV) is a new tool for fluid dynamics studies. Using LDV the velocity vector field can be measured without disturbing the flow itself. However, in polymer melt fluid dynamics difficulties arise because of temperature problems, the relatively high pressure involved, and the often extremely slow flows. In this paper a LDV system is described which was set up especially for polymer melt flow investigations.     

Polarized basis sets of Slater-type orbitals: H to Ne atoms

We present three Slater-type atomic orbital (STO) valence basis (VB) sets for the first and second row atoms, referred to as the VB1, VB2, and VB3 bases. The smallest VB1 basis has the following structure: [3, 1] for the H and He atoms, [5, 1] for Li and Be, and [5, 3, 1] for the B to Ne series. For the VB2 and VB3 bases, both the number of shells and the number of functions per shell are successively increased by one with respect to VB1. With the exception of the H and Li atoms, the exponents for the VB1 bases were obtained by minimizing the sum of the Hartree-Fock (HF) and frozen-core singles and doubles configuration interaction (CISD FC) energies of the respective atoms in their ground state. For H and Li, we minimized the sum of the HF and CISD FC energies of the corresponding diatoms (i.e., of H(2) or Li(2)) plus the ground-state energy of the atom. In the case of the VB2 basis sets, the sum that was minimized also included the energies of the positive and negative ions, and for the VB3 bases, the energies of a few lowest lying excited states of the atom. To account for the core correlations, the VBx (x = 1, 2, and 3) basis sets for the Li to Ne series were enlarged by one function per shell. The exponents of these extended (core-valence, CV) basis sets, referred to, respectively, as the CVBx (x = 1, 2, and 3) bases, were optimized by relying on the same criteria as in the case of the VBx (x = 1, 2, and 3) bases, except that the full CISD rather than CISD FC energies were employed. We show that these polarized STO basis sets provide good HF and CI energies for the ground and excited states of the atoms considered, as well as for the corresponding ions.     

Determination of anionic trace impurities in glycerol by capillary isotachophoresis with enlarged sample load

Glycerol of different quality classifications served as a model for a neutral excess component in the isotachophoretic determination of low-molecular-mass anionic trace impurities. Potential anionic contaminants such as nitrate, sulphate, chlorate, nitrite, oxalate, fluoride formate and phosphate were analysed up to an analyte-to-excess ratio of 1:4·10⁷, thus providing the possibility of checking the sample for the mentioned analytes in the order of 2.5·10⁻⁶–9.5·10⁻⁶%. Because we used a column-coupling isotachophoretic instrument the electrolyte system consisted of two different leading electrolytes, one for the pre-separation (10 mmol/l HCl, β-alanine, pH 3.2) in the first capillary and one for the final separation (5 mmol/l HCl, 1,3-bis[tris(hydroxymethyl)methylamino]propane, β-alanine, pH 3.6) in the second capillary. The terminating electrolyte was citric acid. Due to an increased injection volume of 300 μl, limits of detection (LODs) in the nanomolar range were realised by conductivity detection. The developed method allows simultaneous analysis without sample preparation and/or preconcentration within 25 min and is for that reason suitable for in-place process control.     

Diphosphacarbollide analogues of the C5H5- anion: isolation of the nido-di- and triphosphacarboranes 7,8,9-P2CB8H10, [7,8,9-P2CB8H9]-, [7,8,10-P2CB8H9]-, and 7,8,9,10-P3CB7H8

Treatment of a solution of excess PCl(3) and PS (PS = "proton sponge" = 1,8-dimethylamino naphthalene) with arachno-4-CB(8)H(14) (1) in CH(2)Cl(2), followed by hydrolysis of the reaction mixture, resulted in the isolation of the eleven-vertex diphosphacarbaborane nido-7,8,9-P(2)CB(8)H(10) (2) (yield 34%) as the main product. Other products isolated from this reaction were the phosphacarboranes nido-7,8,9,10-P(3)CB(7)H(8) (3) (yield 5%) and closo-2,1-PCB(8)H(9) (4) (yield 15%). Compound 2 can be deprotonated by PS in CH(2)Cl(2) or NaH in diethyl ether to give the [nido-7,8,9-P(2)CB(8)H(9)](-) (2(-)()) anion, which gives back the original compound, 2, upon re-protonation. Thermal rearrangement of anion 2(-) (Na(+) salt) at 350 degrees C for 2 h produced the isomeric [nido-7,8,10-P(2)CB(8)H(9)](-) (5(-)()) anion, which was isolated as a PPh(4)(+) salt (yield 86%). Multinuclear ((1)H, (11)B, (31)P, and (13)C), two-dimensional [(11)B-(11)B] COSY, (1)H{(11)B(selective)}, (1)H{(31)P(selective)}, and gradient-enhanced ([(1)H-(13)C] HSQC) magnetic resonance measurements led to complete assignments of all resonances which are in excellent agreement with the structures proposed. Coupling constants, (1)J((31)P,(13)C), (2)J((31)P,C,(1)H), and (1)J((31)P,(31)P), were calculated using the DFT method B3LYP/6-311+G(d,p). The molecular geometries of all compounds were optimized ab initio at a correlated level of theory (RMP2(fc)) using the 6-31G basis set, and their correctness was assessed by comparison of the experimental (11)B and (13)C chemical shifts with those calculated by the GIAO-SCF/II//RMP2(fc)/6-31G method. The computations also include the structures and chemical shieldings of the still unknown isomers [nido-7,10,8-P(2)CB(8)H(9)](-) (6(-)) and [nido-7,9,8-P(2)CB(8)H(9)](-) (7(-)).