Direct visualization of the nanoscopic three‐phase structure and stiffness of NBR/PVC blends by AFM nanomechanical mapping

The PeakForce Quantitative Nanomechanical Mapping based on atomic force microscope (AFM) is employed to first visualize and then quantify the elastic properties of a model nitrile rubber/poly(vinyl chloride) (NBR/PVC) blend at the nanoscale. This method allows us to consistently observe the changes in mechanical properties of each phase in polymer blends. Beyond measuring and discriminating elastic modulus and adhesion forces of each phase, we tune the AFM tips and the peak force parameters in order to reliably image samples. In view of viscoelastic difference in each phase, a three‐phase coexistence of an unmixed NBR phase, the mixed phase, and PVC microcrystallites is directly visualized in NBR/PVC blends. The nanomechanical investigation is also capable of recognizing the crosslinked rubber phase in cured rubber. The contribution of the mixed phase was quantified and it was found that the mechanical properties of blends are mainly determined by the homogeneity and stiffness of the mixed phase. This study furthers our understanding the structure–mechanical property relationship of thermoplastic elastomers, which is important for their potential design and applications. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2019 , 57, 662–669     

Investigation of capacitance storage and cyclic voltammetry for the electrochemical oxidation of phenol on iridium and lead oxide electrodes

Journal of Solid State Electrochemistry - The capacitance storage and cyclic voltammetry (CV) of electrochemical oxidation of phenol were investigated using IrO2–Ta2O5/Ti and β-PbO2/Ti...     

Synergistic Surface Passivation of CH3NH3PbBr3 Perovskite Quantum Dots with Phosphonic Acid and (3-Aminopropyl)triethoxysilane

CH₃NH₃PbBr₃ perovskite quantum dots (PQDs) are synthesized by using four different linear alkyl phosphonic acids (PAs) in conjunction with (3-aminopropyl)triethoxysilane (APTES) as capping ligands. The resultant PQDs are characterized by means of XRD, TEM, Raman spectroscopy, FTIR spectroscopy, UV/Vis, photoluminescence (PL), time-resolved PL, and X-ray photoelectron spectroscopy (XPS). PA chain length is shown to control the PQD size (ca. 2.9–4.2 nm) and excitonic absorption band positions (λ=488–525 nm), with shorter chain lengths corresponding to smaller sizes and bluer absorptions. All samples show a high PL quantum yield (ca. 46–83 %) and high PL stability; this is indicative of a low density of band gap trap states and effective surface passivation. Stability is higher for smaller PQDs; this is attributed to better passivation due to better solubility and less steric hindrance of the shorter PA ligands. Based on the FTIR, Raman, and XPS results, it is proposed that Pb²⁺ and CH₃NH₃⁺ surface defects are passivated by R−PO₃²⁻ or R−PO₂(OH)⁻, whereas Br⁻ surface defects are passivated by R−NH₃⁺ moieties. This study establishes the combination of PA and APTES ligands as a highly effective dual passivation system for the synergistic passivation of multiple surface defects of PQDs through primarily ionic bonding.     

Vesicle formation in aqueous mixture of the cetyltrimetylammonium bromide and an anionic chitosan derivative

The present work aimed at research the physic-chemical properties of the interaction of N-decyl-O-chitosan sulfate (an amphiphilic chitosan derivative, C₁₀-OCHS) with cetyltrimetylammonium bromide (CTAB) by the steady-state fluorescent, static/dynamic surface tension, turbidity and transmission electron microscopy (TEM). The results showed that the complex of C₁₀-OCHS/CTAB had high surface activity and lower critical aggregation concentration. Besides, the C₁₀-OCHS/CTAB could self-assemble into various aggregates like irregular spherical aggregates, vesicles or polydisperse aggregates from lower to higher concentrations of CTAB with a mixed C₁₀-OCHS concentration of 200?mg/L.     

UFLC–MS/MS method for simultaneous determination of six lignans of Schisandra chinensis (Turcz.) Baill. in normal and insomniac rats brain microdialysates and homogenate samples: towards an in‐depth study for its sedative‐hypnotic activity

Schisandra chinensis (Turcz.) Baill., a traditional Chinese medicine, has been clinically used for the treatment of insomnia for centuries. The insomnia mechanism and the possible active ingredients of S. chinensis remain largely unknown. The objective of this study was to develop a method to detect its components which could pass through the blood brain barrier (BBB) by determining the brain microdialysate and brain tissue homogenate samples and then obtain the pharmacokinetic profile in brain for comprehensive understanding of its hypnotic clinical efficacy. Therefore, an efficient, sensitive and selective ultra fast liquid chromatography/tandem mass spectrometry method for the simultaneous determination of six sedative and hypnotic lignans (schisandrin, schisandrol B, schisantherin A, deoxyshisandrin, γ‐schisandrin and gomisin N) of Schisandra chinensis (Turcz.) Baill. in rat brain tissue homogenate and brain microdialysates has been developed and validated. The analysis was performed on a Shim‐pack XR‐ODS column (75 mm × 3.0 mm, 2.2 µm) using gradient elution with the mobile phase consisting of acetonitrile and 0.1% formic acid water. The method was validated in brain homogenate and microdialysate samples, which all showed good linearity over a wide concentration range (r² > 0.99), and the obtained lower limit of quantification was 0.1 ng · ml^?1 for the analytes in brain microdialysate samples. The intra‐ and inter‐day assay variability was less than 15% for all analytes. The study proved the six lignans, as sedative and hypnotic ingredients, could pass through the BBB with brain targeting, distributed mainly in the hypothalamus and possessed complete pharmacokinetics process in brain. The results also indicated that significant difference in pharmacokinetic parameters of the analytes was observed between two groups, while absorptions of these analytes in insomniac group were significantly better than those in normal group. Copyright © 2013 John Wiley & Sons, Ltd.     

Thermogravimetry study of the pyrolytic characteristics and kinetics of macro-algae Macrocystis pyrifera residue

Macrocystis pyrifera is one important marine macro-algae, while its residues produced by industrial alginate extraction is a hot potato. To figure out whether its residue is suitable for pyrolysis for biofuel, the pyrolytic characteristics and kinetics of macro-algae M. pyrifera residue was investigated using thermogravimetric method from 50 to 800 °C in an inert argon atmosphere at different heating rates of 5, 10, 20, and 30 °C min^?1. The activation energy and pre-exponential factor was calculated by Flynn–Wall–Ozawa, Kissinger–Akahira–Sunose, and Popescu methods, and the kinetic mechanism was deduced by Popescu method. The results showed that the primary devolatilization stage of M. pyrifera residue can be described by Jander function $ \left(\left[ {1 - \left( {1 - \alpha } \right)^{1/3} } \right]^{2}\right) $ . The average activation energy of M. pyrifera residue was 222.4 kJ mol^?1. The results suggested that the experimental results and kinetic parameters provided useful information for the design of pyrolytic processing system using M. pyrifera residue as feedstock.     

Mechanical and electrochemical properties of platinum coating by double glow plasma on titanium alloy substrate

In this paper, a platinum coating was deposited on titanium alloy substrate by a double glow plasma. Phase and microstructure of platinum coating were examined by X-ray diffraction and scanning electron microscopy, respectively. The microhardness of the coating was estimated by nanoindentation instrument. The adhesive force between the coating and the substrate was performed with scratch tester. The electrochemical behavior of the platinum coating in 3.5 wt % sodium chloride solution was investigated by potentiodynamic polarization. The results indicated that an adherent platinum coating could be successfully obtained on titanium alloy substrates. Compared with the titanium alloy substrate, the platinum coating had a relative low corrosion current density and high corrosion potential. It indicated that the platinum coating had a better corrosion resistance than the titanium alloy substrate.     

Enhancing the Cellulose-Degrading Activity of Cellulolytic Bacteria CTL-6 (Clostridium thermocellum) by Co-Culture with Non-cellulolytic Bacteria W2-10 (Geobacillus sp.)

The effect of a non-cellulolytic bacterium W2-10 (Geobacillus sp.) on the cellulose-degrading activity of a cellulolytic bacterium CTL-6 (Clostridium thermocellum) was determined using cellulose materials (paper and straw) in peptone cellulose solution (PCS) medium under aerobic conditions. The results indicated that in the co-culture, addition of W2-10 resulted in a balanced medium pH, and may provide the required anaerobic environment for CTL-6. Overall, addition of W2-10 was beneficial to CTL-6 growth in the adverse environment of the PCS medium. In co-culture with W2-10, the CTL-6 cellulose degradation efficiency of filter paper and alkaline-treated wheat straw significantly increased up to 72.45 and 37.79 %, respectively. The CMCase activity and biomass of CTL-6 also increased from 0.23 U ml^?1 and 45.1 μg ml^?1 (DNA content) up to 0.47 U ml^?1 and 112.2 μg ml^?1, respectively. In addition, co-culture resulted in accumulation of acetate and propionate up to 4.26 and 2.76 mg ml^?1. This was a respective increase of 2.58 and 4.45 times, in comparison to the monoculture with CTL-6.     

Develop a stepwise integrated method to screen biomarkers of Baihe-Dihuang Tang on the treatment of depression in rats applying with composition screened,untargeted, and targeted metabolomics analysis

Baihe-Dihuang Tang is a commonly prescribed remedy for depression. In this study, component screening with untargeted and targeted metabolomics was used to identify potential biomarkers for depression in chronic unpredictable mildly stressed rats. Using this novel identification method, the screening of organic acids, lily saponins, iridoids, and other ingredients formed the basis for subsequent metabolomics research. Baihe-Dihuang Tang supplementation in chronic unpredictable mild-stress-induced depression models, increased their body weight, sucrose preference, brain-derived neurotrophic factor deposition, and spatial exploring. Untargeted metabolomics revealed that Baihe-Dihuang Tang exerts its antidepressant effects by regulating the levels of lipids, organic acids, and its derivatives, and benzenoids in the brain, plasma, and urine of the depressed rats. Moreover, it also modulates the d -glutamine and d -glutamate metabolism and purine metabolism. Targeted metabolomics demonstrated significant reduction in l -glutamate levels in the brains of depressed rats. This could be a potential biomarker for depression. Baihe-Dihuang Tang alleviated depression by regulating the levels of l -glutamate, xanthine, and adenine in the brains of depressed rats. Together, these findings conclusively established the promising therapeutic effect of Baihe-Dihuang Tang on depression and also unraveled the underlying molecular mechanism of its potential antidepressant function.