Single LED based dual wavelength referenced optical fibre sensor system using intensity modulation

An intensity-modulated optical fibre sensor system is described which employs a single LED source to provide the measurand and the reference signals with two separate wavelength bands. The allocated wavelength bands are selected to minimize any differential intensity effects that may arise from LED thermal variations. The sensor system, comprising a transceiver unit connected to an optical displacement sensor using a single optical fibre, provides an output fully referenced for all major common-mode variations that are likely to occur. Performance characteristics for the prototype system are reported which show a linear displacement range of over 20 mm.     

Polarized emission from a rhenium metal-ligand complex

We report the first observation of polarized emission from a rhenium-phenanthroline complex, Re(CO)₃(phen)Cl. Highly luminescent rhenium complexes are known, with quantum yields near 0.5 and lifetimes in excess of 10 s. The detection of polarized emission suggests the use of rhenium complexes as probes of the hydrodynamics of large macromolecular complexes and for use in fluorescence polarization immunoassays with gated detection.     

Screening of urban aerosol particulate composites for selected metal distribution and their dependence on meteorological parameters

Local atmospheric aerosol particulate samples, collected as composites on daily 6-12 hour basis, at Quaid-i-Azam University campus, Islamabad, Pakistan, using high volume sampling technique, were analysed for Pb, Na, K, Fe, Mn, Cd, Cr, Ni, Zn and Co by FAAS method. The monitoring period ran from October, 2001 through March, 2002, with a total of 105 samples collected on cellulose filters, treated in part with the HNO3-based wet digestion method for metal quantification, and for particle size distribution separately. The metal content of the aerosols was examined in relation to dependence on meteorological parameters, such as temperature, relative humidity, wind speed, sun shine and pan evaporation. Statistical correlation analysis was conducted for multiple metal pairs in aerosols, and the data were examined in relation to meteorological parameters and relevant aerosol particle size fractions. The study revealed no viable strong correlation between the meteorological parameters and metal levels; in general, however, a significant positive correlation was found for temperature. A strong positive correlation was observed for PM<25 and PM2.5-10. For coarse particles (PM10-100 and PM>100), however, a negative correlation was observed. The levels of Na, K, Fe and Zn were found in the range of 1-5 microg/m3 while those for the rest of the metals in the sub microg/m3 range. Principal component analysis and cluster analysis were performed on dataset for source identification and appointment. Largest contribution (33%) was shown by the industrial emissions followed by traffic/road dust (16.7%).     

Sorption of divalent metal ions on CrPO4

The divalent metal ion sorption (Cu(2+), Cd(2+), Ni(2+), and Pb(2+)) on chromium phosphate (CrPO(4)) was studied as a function of pH, temperature, and concentration of metal ions. The sorption of metal ions is observed to increase with the increase in pH, temperature, and concentration of metal ions in solution. The mechanism of sorption is found to be the exchange of the hydrolyzed metal cations with the protons from solid at high temperature. The sorption at low temperature is found to be accompanied by the precipitation of the corresponding metal phosphates such as Pb(3)(PO(4))(2).     

Kinetics and electrochemical studies on superoxide

Rate constants for the reaction of superoxide O^- ₂ with various substrates were obtained through stationary electrode polarography theory and technique. In solvent acetonitrile, the substrate and the rate constants of the reaction O^- ₂ + AH^{- k2}Product, are, AH = isopropanol (k₂ < 0.01 M^-1 s^-1); ethanol (k₂ = 1.42 × 10² M^-1 s^-1); methanol (k₂ = 1.1 × 10⁷ M^-1 s^-1), H₂O (k₂ = 1.0 × 10⁵ M^-1 s^-1). In MeCN, O^-2 was found to be rather unreactive towards glucose and acetone but it reacts with fructose and sucrose catalytically. However, in DMF2, O^- ₂reacts with glucose and fructose with k2 order of 105 M-1 s-1. The mechanism of the reaction of O^- ₂ with the substrates (AH) is proposed as O^- ₃ + AH k₂O, AH^k2 _k-1 k [O₂H + AH]^-, _k-2O₂H + A^- with k₁ = 10⁹ M^-1 s^-1 and k^-1 = 10⁸ -10⁹ s^-1. With these values of k_-1 and k₁, k k₂(obs). The reversible E_1/2 for O₂ + e O^- ₂ in various solvents: MeCN, acetone, isopropanol, methanol, H₂O were obtained either directly from the reversible voltammogram or from experimental voltammograms and the rate constants obtained (as above) using stationary electrode polargraphy theory; E_1/2 being -0.82 (MeCN),-0.85 (acetone),-0.72 (isopropanol);-0.66 (MeOH),-0.56 (H2O) vs SCE.     

An expedient esterification of aromatic carboxylic acids using sodium bromate and sodium hydrogen sulfite

Treatment of aromatic carboxylic acids and substituted toluenes with a mixture of sodium bromate and sodium hydrogen sulfite in a two-phase system gave the corresponding esters in good yield. The intermediate α-brominated toluene was formed by the in situ generated hypobromous acid. The α-bromotoluene underwent an intermolecular nucleophilic substitution reaction with aromatic carboxylic acids present in the reaction mixture to afford the corresponding esters.     

Exploring the Potential of Metallodrugs as Chemotherapeutics for Triple Negative Breast Cancer

This review focuses on studies of coordination and organometallic compounds as potential chemotherapeutics against triple negative breast cancer (TNBC) which has one of the poorest prognoses and worst survival rates from all breast cancer types. At present, chemotherapy is still the standard of care for TNBC since only one type of targeted therapy has been recently developed. References for metal-based compounds studied in TNBC cell lines will be listed, and those of metal-specific reviews, but a detailed overview will also be provided on compounds studied in vivo (mostly in mice models) and those compounds for which some preliminary mechanistic data was obtained (in TNBC cell lines and tumors) and/or for which bioactive ligands have been used. The main goal of this review is to highlight the most promising metal-based compounds with potential as chemotherapeutic agents in TNBC.     

Microbiological Transformation of L-Tyrosine to L-Dopa from Methanol Pretreated Biomass of a Novel Coriolus versicolor under Submerged Culture

The present study is concerned with the microbiological transformation of L-tyrosine to L-dopa by a newly isolated turkey tail mushroom Coriolus versicolor DOB-4. As tyrosinase (catechol oxidase, EC 1.10.3.1) is an extracellular enzyme, therefore biomass was used as an enzyme source in the reaction mixture. Biomass particles were pretreated with methanol and oven dried at 105 °C for 2 h. The optimal L-dopa production was achieved when 1.5 mg/ml L-tyrosine was used as the basal substrate. Thin layer chromatography and high-performance liquid chromatography analysis depicted that citric acid supports higher substrate conversion and product formation rates. A noticeable enhancement was observed when process parameters viz. L-tyrosine concentration (1.5 mg/ml), citric acid (1.5 mg/ml), time of incubation (50 min), and reaction temperature (60 °C) were optimized using Plackett–Burman design. The maximum production of L-dopa was found to be 0.872 mg/ml with L-tyrosine consumption of 1.002 mg/ml. The model terms were found highly significant (HS, p?≤?0.05), suggesting the potential commercial utility of the culture (df?=?3, LSD?=?0.342).     

First-principle investigation of XSrH3 (X = K and Rb) perovskite-type hydrides for hydrogen storage

Hydrogen can be utilized as an energy source; therefore, hydrogen storage has received the most appealing examination interest in recent years. The investigations of hydrogen storage applications center fundamentally around the examination of hydrogen capacity abilities of recently presented compounds. XSrH₃ (X = K and Rb) compounds have been examined by density functional theory (DFT) calculations to uncover their different characteristics, as well as hydrogen capacity properties, for the first time. Studied compounds are optimized in the cubic phase, and optimized lattice constants are obtained as 4.77 and 4.99 Å for KSrH₃ and RbSrH₃, respectively. These hydrides have shown negative values of formation enthalpies as they are stable thermodynamically. XSrH₃ might be used in hydrogen storage applications because of high gravimetric hydrogen storage densities, which are 2.33 and 1.71 wt% for KSrH₃ and RbSrH₃, respectively. Moreover, electronic properties confirm the semiconductor nature of these compounds having indirect band gaps of values 1.41 and 1.23 eV for KSrH₃ and RbSrH₃, respectively. In addition, mechanical properties from elastic constants such as Young modulus and Pugh's ratio, also have been investigated, and these compounds were found to satisfy born stability conditions. Furthermore, Pugh's ratio and Cauchy pressure show that these hydrides have a brittle nature. Furthermore, thermodynamic properties such as entropy and Debye temperature have been examined using the quasiharmonic Debye model for different temperatures and pressures.     

Magnetoelectronic properties of ferromagnetic compounds Rb2TaZ6 (Z = Cl,Br) for possible spintronic applications

Highly spin-polarized ferromagnetic materials are essential for efficient spintronic devices. Here, 100% spin-polarized compounds Rb₂TaZ₆ (Z = Cl, Br) studied via density functional theory are reported. These compounds show stability in the ferromagnetic phase with cubic symmetry and half metallic behavior, thereby exhibiting a nonzero direct band gap in the spin-down channel and zero band gap in the spin-up configuration. The Ta-d sates contribute mainly to the net magnetic moments as explained by the crystal field theory and density of states. High Curie temperatures of 960.35 and 1021.74 K for Ra₂TaCl₆ and Rb₂TaBr₆, along with maximum spin polarizability, make these compounds favorable for efficient spintronic applications.