Mixed-ligand and binuclear complexes of oxovanadium(IV)

Summary Mixed ligand complexes of the type [VOLA]ClO₄ where L=5-bromosalicylaldehyde (L) or 5-nitrosalicylaldehyde (L) and A=2, 2-dipyridyl (A) or 1, 10-phenanthroline (A) have been prepared. Treatment of the mononuclear complexes, [VOLA]ClO₄, withp-phenylenediamine (ppd) orm-phenylenediamine (mpd) yielded homobinuclear [VOLA-NC₆H₄N-LAVO](ClO₄)₂, complexes, which were characterised by elemental analyses, spectra, magnetic susceptibility and molar conductance measurements.     

Preparation and characterization of hydroxypropyl-β-cyclodextrin inclusion complex of eugenol: differential pulse voltammetry and (1)H-NMR

The objective of present investigation was to improve the solubility of Eugenol by preparing the inclusion complex of Eugenol with hydroxypropyl-β-cyclodextrin (Hp-β-CD) and characterize the prepared complex by using NMR and differential pulse voltammetry (DPV). Phase solubility curve was plotted using Hp-β-CD in ranging from 0-40 mM of Hp-β-CD and found to be linear. Therefore, inclusion complex was prepared in equimolar ratio of Eugenol and Hp-β-CD by lyophilization method. Fourier transform infrared spectroscopy (FT-IR), (1)H-NMR and DPV were performed for Eugenol, Hp-β-CD and prepared inclusion complex of Eugenol. 2D (two dimensional) NMR was also performed for prepared inclusion complex. The proton of phenol moiety of Eugenol experienced a pronounced chemical shift variation in (1)H-NMR. The positive sign of the variation for proton in (1)H-NMR indicated that the proton was located near to an oxygen atom in the Hp-β-CD cavity and its magnitude showed a strong interaction between -OH proton of Eugenol and Hp-β-CD. 2D NMR confirms the interaction between phenolic group and hydrogen atoms of Hp-β-CD. A well defined anodic peak current corresponding to oxidation of Eugenol in non-encapsulated and Hp-β-CD-Eugenol inclusion complex in phosphate buffer (pH 6.8) was obtained at about 0.35 V and 0.40 V, respectively. The positive shift in oxidation potential indicated the formation of complex via hydrophobic interactions. The oxidant power of Eugenol was retained in complex form as indicated by DPV results. Thus, its oxidation dependent pharmacological property such as antimicrobial activity is not affected after complexation with Hp-β-CD. Thus, (1)H-NMR, 2D-NMR and DPV techniques can be used as valuable tools to determine the mechanism of complexation and state of electrochemical active drug in inclusion complex.     

Synthesis of ultra‐low‐molecular‐weight polyethylene wax using a bulky Ti(IV) aryloxide–alkyl aluminum catalytic system

Complexes of titanium(IV) with bulky phenolic ligands such as 2‐tert‐butyl‐4 methylphenol, 2, 4‐di‐tert‐butyl phenol and 3,5‐di‐tert‐butyl phenol were prepared and characterized. These catalyst precursors, formulated as [Ti(OPh*)_n(OPrⁱ)_4?n] (OPh* = substituted phenol), were found to be active in polymerization of ethylene at higher temperatures in combination with ethylaluminum sesquichloride (Et₃Al₂Cl₃) as co‐catalyst. It was observed that the reaction temperature and ethylene pressure had a pronounced effect on polymerization and the molecular weight of polyethylene obtained. In addition, this catalytic system predominantly produced linear, crystalline ultra‐low‐molecular‐weight polyethylenes narrow dispersities. The polyethylene waxes obtained with this catalytic system exhibit unique properties that have potential applications in surface coating and adhesive formulations. Copyright © 2007 John Wiley & Sons, Ltd.     

Synthesis and catalytic activity of binuclear Mn(III,III)–BINOL complexes for epoxidation of olefins

The novel binuclear complexes [Mn₂^{(III, III)}(BINOL)₃L₂]2H₂O, where, L = 2, 2′‐bipyridine (Bpy) or 1,10‐phenanthroline (Phen) and BINOL = 1, 1′‐bi‐2‐naphthol were synthesized and characterized by elemental analyses, magnetic susceptibility and various spectral methods. The catalytic activity of these complexes was studied for the epoxidation reaction of unfunctionalized olefins like styrene, 1‐hexene, 1‐octene and 1‐decene. The products thus obtained were analyzed by GC. The epoxidation reactions were carried out, in the presence of catalyst with different oxidants, to study the effect of the nature of the oxidant on the reactions. The different oxidants used were the peroxide oxygen donor (e.g. TBHP and H₂O₂), mono oxygen donor (e.g. PhIO) and dioxygen donor (e.g. molecular O₂). TBHP was found to be the best oxidant for the epoxidation reaction. To study the effect of the solvent on the epoxidation, the reactions were carried out in different media, such as a polar media (e.g. with CH₃OH as solvent), non‐polar media (e.g. with CH₂Cl₂ and C₆H₆ as solvents) and coordinating solvent (e.g. CH₃CN). The maximum epoxide formation was observed in CH₂Cl₂ medium. The epoxidation reactions with optically active BINOL catalysts under optimum established conditions were carried out to examine the enantioselectivity of the catalysts. The complexes were, however, found not to be enantioselective. Copyright © 2006 John Wiley & Sons, Ltd.     

Triol protection with 6-benzoyl-3,4-dihydro-(2H)-pyran

6-Benzoyl-3,4-dihydro-(2H)-pyran will protect 1,2,3-triols such as glycerol as their corresponding spiro-[5-phenyl-3,6,8-trioxabicyclo[3.2.1]octane-4,2[prime or minute]-tetrahydropyran]s and 1,2,4-triols (less efficiently) as the corresponding trioxabicyclo[3.2.2]nonanes; the hexol mannitol is converted into the corresponding bis-protected product.     

Formation of the imide [Ta(NMe2)3(μ-NSiMe3)]2 through an unprecedented α-SiMe3 abstraction by an amide ligand

Ta(NMe(2))(4)[N(SiMe(3))(2)] (1) undergoes the elimination of Me(3)Si-NMe(2) (2), converting the -N(SiMe(3))(2) ligand to the ═NSiMe(3) ligand, to give the imide "Ta(NMe(2))(3)(═NSiMe(3))" (3) observed as its dimer 4. CyN═C═NCy captures 3 to yield guanidinates Ta(NMe(2))(3-n)(═NSiMe(3))[CyNC(NMe(2))NCy](n) [n = 1 (5), 2 (6)]. The kinetic study of α-SiMe(3) abstraction in 1 gives ΔH(?) = 21.3(1.0) kcal/mol and ΔS(?) = -17(2) eu.     

Portable remote Raman system for monitoring hydrocarbon, gas hydrates and explosives in the environment

We report our initial efforts to use a small portable Raman system for stand-off detection and identification of various types of organic chemicals including benzene, toluene, ethyl benzene and xylenes (BTEX). Both fiber-optic (FO) coupled and a directly coupled f/2.2 spectrograph with the telescope have been developed and tested. A frequency-doubled Nd:YAG pulsed laser (20 Hz, 532 nm, 35 mJ/pulse) is used as the excitation source. The operational range of the FO coupled Raman system was tested to 66 m, and the directly coupled system was tested to a distance of 120 m. We have also measured remote Raman spectra of compressed methane gas and methane gas hydrate. The usefulness of the remote Raman system for identifying unknown compounds is demonstrated by measuring stand-off spectra of two plastic explosives, e.g. tri-amino tri-nitrobenzene (TATB) and beta-HMX at 10 m stand-off distance. The remote Raman system will be useful for terrestrial applications such as monitoring environmental pollution, in identifying unknown materials in public places in 10s or less, and for detecting hydrocarbon plumes and gas hydrates on planetary surfaces such as Mars.     

Majorization for certain classes of analytic functions using multiplier transformation

In the present paper we investigate the majorization properties for certain classes of multivalent analytic functions defined by multiplier transformation. Moreover, we point out some new or known consequences of our main result.     

Multi-scale Model of Reactive Transport in Fractured Media: Diffusion Limitations on Rates

Transport in Porous Media - Reactive transport in fractured media is conceptualized as a multi-scale problem that couples a pore-scale component, which comprises Navier–Stokes flow,...     

Removal of Cr(VI) from aqueous solutions using EDCC-MCM-41: Isotherm,kinetics and thermodynamic evaluation

Abstract

EDCC-MCM-41, a novel ethylenediamine derivative of MCM-41 was synthesized from a sugar industry waste, bagasse fly ash. Studies were carried out on its ability to remove Cr(VI) from aqueous solution. Its performance was also compared with that of unmodified MCM-41 and an already known derivative NH₂-MCM-41 (both also synthesized from bagasse fly ash) at the same experimental conditions. Results show that the novel adsorbent produced a better sorption performance (adsorption capacity of 49.04?mg g^?1) than MCM-41 and NH₂-MCM-41 which produced adsorption capacities of 13.78?mg g^?1 and 25.29?mg g^?1 respectively. Thermodynamics, kinetics and isotherm studies confirm that the sorption process involving the novel adsorbent is favorable for Cr(VI) and can best be represented by pseudo-second-order kinetics model. The sorption process was also found to be multistep, involving both film diffusion and intraparticle diffusion into the pores on the adsorbent’s surface.

Abbreviations: BFA: Bagasse Fly Ash; MCM-41: Mobil Composition of matter no. 41; NH2-MCM-41: mine functionalized MCM-41; EDCC-MCM-41: Ethylenediamine grafted MCM-41; qe: Mass of material adsorbed at equilibrium per mass of adsorbent; qt: Mass of material adsorbed at any time t per mass of adsorbent; C0: The initial concentration; Ce: The residual concentration at equilibrium; Ct: Residual concentration at any time t; W: The weight of adsorbents; rRMSD: Root mean square deviation; R: Gas constant